Search Results - CAM

Evaluating the Microshear Bond Strength of an MDP-Containing Universal Adhesive Compared with Its Predecessor to Three Different Generations of CAD/CAM Fabricated Zirconia Ceramics.

Authors: Almudahi, Abdulellah Elkaffas, Ali A.

Source: Applied Sciences (2076-3417); Jul2026, Vol. 16 Issue 14, p6915, 15p

Traditional Versus Customized CAD/CAM Rapid Palatal Expanders in Growing Patients: A Pilot Exploratory Prospective Non-Randomized Clinical Study.

Authors: Saccomanno, Sabina Silenzi, Lorenzo Ederli Ciocia, Claudia et al.

Source: Applied Sciences (2076-3417); Jul2026, Vol. 16 Issue 13, p6358, 17p

Patient-Specific Virtual Surgical Planning and In-House CAD-/CAM-Guided Vascularized Bone Flaps for Salvage Extremity Reconstruction: A Case Series.

Authors: Seth, Jaideep Marquardt, Matthew D. Herster, Rachel et al.

Source: Bioengineering (Basel). Jul2026, Vol. 13 Issue 7, p721. 12p.

Protocol Development for Virtual CAD/CAM Surgical Guides in Non Restorable Single Tooth Implant Rehabilitation: A Computational Simulation Study.

Authors: NAIDU, VYANKATESH JAJU, SANTOSH

Source: Journal of Clinical & Diagnostic Research. Jul2026, Vol. 20 Issue 7, p1-8. 8p.

MATERIAL UTILIZATION EFFICIENCY IN PANEL CUTTING FOR FURNITURE MANUFACTURING: COMPARATIVE EVALUATION OF CONVENTIONAL AND INTEGRATED CAD-CAM OPTIMIZATION SYSTEMS.

Authors: Krstev, Marija¹ ilievska_11@yahoo.com

Source: Natural Resources & Technology. Jun2026, Vol. 20 Issue 1, p27-36. 10p.

Fracture Resistance of CAD/CAM Resin-Matrix Ceramic Overlays and Full-Coverage Crowns for Maxillary Premolars.

Authors: Mohamed, Ali Abulkasim Morrow, Brian Mireles, Stella et al.

Source: Biomimetics (2313-7673). May2026, Vol. 11 Issue 5, p291. 13p.

Evaluation of Polytetrafluoroethylene (PTFE) Tape for Gingival Displacement Using CAD/CAM Analysis and Scanning Electron Microscopy (SEM).

Authors: Rusu, Laura Monica Pop, Antonio Cuc, Stanca et al.

Source: Journal of Functional Biomaterials; Aug2026, Vol. 17 Issue 8, p408, 15p

Tribological Performance of CAM-Processed Interim Dental Restoration Materials: Effects of 3D Printing, Milling, and Post-Processing on Wear and Surface Topography.

Authors: Porojan, Liliana Vasiliu, Roxana Diana Bejan, Flavia Roxana et al.

Source: Journal of Functional Biomaterials; Mar2026, Vol. 17 Issue 3, p136, 23p

Single‐Retainer Lithium Disilicate Resin‐Bonded Bridge for Mandibular Central Incisor Replacement Using CAD/CAM and Virtual Articulator: A 25‐Month Case Report.

Authors: Hariri, I. Dabla, F. El Yamani, A.

Source: Clinical Case Reports. Mar2026, Vol. 14 Issue 3, p1-9. 9p.

Effect of Different Luting Protocols on the Bond Strength of Fiber-Reinforced CAD/CAM Blocks.

Authors: Buyukates, Irem Garoushi, Sufyan Vallittu, Pekka K. et al.

Source: Polymers (20734360). Jan2026, Vol. 18 Issue 2, p160. 16p.

Recycling of Dental Zirconia into CAD/CAM Systems for Potential Industrial Applications.

Authors: Aragón-Duarte, Maria del Carmen Esparza-Ponce, Hilda Esperanza Tapia-Lopez, Lillian Vianey et al.

Source: Recycling (MDPI AG). May2026, Vol. 11 Issue 5, p92. 18p.

Comparative Evaluation of Microhardness of CAD/CAM-milled, 3D-printed and Conventional Chairside Interim 3-Unit Fixed Dental Prosthesis: An In-vitro Study.

Authors: SANKESHWARI, BANASHREE S. BOTADRA, AYUSHI PATTANSHETTI, CHANNAVEER et al.

Source: Journal of Clinical & Diagnostic Research. May2026, Vol. 20 Issue 5, p131-134. 4p.

CAD/CAM与常规印模制作二硅酸锂陶瓷高嵌体 修复无髓后牙缺损的效果及对咀嚼功能的影响.

Alternate Title: Comparison of the effects of CAD/CAM and conventional impression-making of lithium disilicate ceramic high inlay restorations on molar endodontically treated teeth and chewing function.

Authors: 孟亚军 李莉 郜珍燕

Source: Journal of Practical Medicine / Shiyong Yixue Zazhi. 10/25/2025, Vol. 41 Issue 20, p3214-3219. 6p.

Comparative Evaluation of Microhardness and Biological Outcomes of CAD/CAM Milled and Conventional Provisional Crowns: A Split-Mouth Clinical Study.

Authors: Rao, Nilisha Datta, Pankaj Rani, Gita et al.

Source: Journal of Chemical Health Risks. 2026, Vol. 16 Issue 3, p5415-5419. 5p.

Evaluation of Fracture Toughness and Surface Roughness of a Novel Experimental Short Fiber-Reinforced CAD/CAM Block Material (In Vitro Study).

Authors: Mohammad, Zakaria Jamal Bakr, Diyar Khalid

Source: Coatings (2079-6412); Dec2025, Vol. 15 Issue 12, p1485, 16p

Effect of Different Surface Treatments and Toothbrushing Durations on Surface Roughness and Color Stability of CAD/CAM Interim Crown Material †.

Authors: Şahin, Onur Köroğlu, Ayşegül Dede, Doğu Ömür et al.

Source: Coatings (2079-6412); Dec2025, Vol. 15 Issue 12, p1377, 15p

The Impact of Coffee, Matcha, Protein Drinks, and Water Storage on the Microhardness and Color Stability of a Nano-Ceramic Hybrid Composite CAD/CAM Blank.

Authors: Yeslam, Hanin E. Alkhaldi, Atheer Alshehri, Ghadah et al.

Source: Journal of Functional Biomaterials; Dec2025, Vol. 16 Issue 12, p444, 17p

Comparative Analysis of Ion Release from Conventional, CAD/CAM-Milled, and 3D-Printed Denture Base Resins Under Acidic and Neutral Conditions.

Authors: Chojnacka, Katarzyna Raszewski, Zbigniew Mikulewicz, Marcin

Source: Applied Sciences (2076-3417); Nov2025, Vol. 15 Issue 22, p12317, 22p

Comparative Evaluation of Color Stability and Fracture Resistance of CAD/CAM and Chairside Provisional Restorations: An In Vitro Study.

Authors: Titihazan, Florina Veja, Ioana Zaharia, Cristian et al.

Source: Journal of Functional Biomaterials; Nov2025, Vol. 16 Issue 11, p426, 15p

Factors that contribute to the successful fabrication of CAD-CAM complete dentures.

Authors: Alsubaiy, Ebrahim Fihaid¹ (AUTHOR) ebrahim-fs@hotmail.com

Source: Journal of Family Medicine & Primary Care. Nov2025, Vol. 14 Issue 11, p4423-4430. 8p.