Determination of Residual Formaldehyde in Urea–Formaldehyde Fertilizer and Formaldehyde Release from Urea–Formaldehyde Fertilizer During Decomposition.
Saved in:
| Title: | Determination of Residual Formaldehyde in Urea–Formaldehyde Fertilizer and Formaldehyde Release from Urea–Formaldehyde Fertilizer During Decomposition. |
|---|---|
| Authors: | Liu, Yan1 (AUTHOR), Li, Junyin1 (AUTHOR), Ma, Ronghui2 (AUTHOR), Dong, Yanhong2 (AUTHOR), Huang, Songjun3 (AUTHOR), Sao, Junfei3 (AUTHOR), Jiang, Yuanmao4 (AUTHOR), Ma, Linna5 (AUTHOR), Cheng, Dongdong1 (AUTHOR) chengdongdong163@126.com |
| Source: | Journal of Polymers & the Environment. Aug2020, Vol. 28 Issue 8, p2191-2198. 8p. |
| Subject Terms: | *Formaldehyde, *Fertilizers, *Urea as fertilizer, Colorimetry, Volumetric analysis |
| Abstract: | In view of the fact that a large amount of formaldehyde was involved in the production of urea–formaldehyde fertilizer, and the residual and decomposed formaldehyde has never been paid attention to. In this paper, the determination method of free formaldehyde content in urea–formaldehyde fertilizer was studied. A simple and accurate method for the determination of formaldehyde in urea–formaldehyde fertilizer was established based on the screening of traditional iodometry titration and acetylacetone colorimetry. The recovery rate of titration method and colorimetric method were 73.9–94.5% and 96.5–103.9%, which indicated that colorimetric method was more accurate. The optimized test conditions are as follows: fertilizer/water extraction ratio 1/20, developer acetylacetone 6 mL, the condition of reacting at 60 °C for 30 min. The linear range of formaldehyde content in urea–formaldehyde fertilizer determined by optimized method is 0.21–3.26 g/mL. [ABSTRACT FROM AUTHOR] |
| Copyright of Journal of Polymers & the Environment is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | GreenFILE |
|
Full text is not displayed to guests.
Login for full access.
|
|
| Abstract: | In view of the fact that a large amount of formaldehyde was involved in the production of urea–formaldehyde fertilizer, and the residual and decomposed formaldehyde has never been paid attention to. In this paper, the determination method of free formaldehyde content in urea–formaldehyde fertilizer was studied. A simple and accurate method for the determination of formaldehyde in urea–formaldehyde fertilizer was established based on the screening of traditional iodometry titration and acetylacetone colorimetry. The recovery rate of titration method and colorimetric method were 73.9–94.5% and 96.5–103.9%, which indicated that colorimetric method was more accurate. The optimized test conditions are as follows: fertilizer/water extraction ratio 1/20, developer acetylacetone 6 mL, the condition of reacting at 60 °C for 30 min. The linear range of formaldehyde content in urea–formaldehyde fertilizer determined by optimized method is 0.21–3.26 g/mL. [ABSTRACT FROM AUTHOR] |
|---|---|
| ISSN: | 15662543 |
| DOI: | 10.1007/s10924-020-01759-y |
