View in EDS HTML Full Text PDF Full Text

Investigation on partially replacing metakaolin with marine shell waste to produce sustainable eco-friendly geopolymer mortars.

Saved in:
Bibliographic Details
Title: Investigation on partially replacing metakaolin with marine shell waste to produce sustainable eco-friendly geopolymer mortars.
Authors: Saba, Marianne1 (AUTHOR), Tehrani, Fateh Fakhari2,3 (AUTHOR), Hajikarimi, Pouria4 (AUTHOR), Absi, Joseph5 (AUTHOR) joseph.absi@unilim.fr
Source: Clean Technologies & Environmental Policy. Oct2023, Vol. 25 Issue 8, p2639-2653. 15p.
Subject Terms: Kaolin, X-ray spectroscopy, Elastic modulus, Mortar, Compressive strength, Scanning electron microscopes
Abstract: This work focuses on the effect of the incorporation of marine shell waste in different mass substitution rates in geopolymer mortars as an efficient solution to overcome the problems related to this waste. In this paper, Lebanese metakaolin was used as the primary clay source of aluminosilicate for the geopolymer mortars. Then, a mass substitution of metakaolin with shell waste was drawn in terms of structure, synthesis mechanism, and parameters delimiting their performance. The chemical properties of all constituents were investigated using X-ray diffraction analysis and X-ray Fluorescence. Also, the microstructure analysis was observed by implementing a scanning electron microscope (SEM). The compressive strength and elasticity modulus were measured as two fundamental mechanical properties of geopolymer samples by highlighting the impact of curing conditions (non-heated and heated) after passing 1, 3, 7, 28, 90, 120, 180, and 360 days and the various substitution rates (0–20%). The results showed that the curing conditions and the various substitution rates of metakaolin with marine shells affected the microstructure and mechanical properties. Adding shell waste reduced the compressive strength for both non-heated and heated samples and slightly increased the elasticity modulus up to 10% for non-heated and for heated curing conditions. While the final compressive strengths of non-heated samples are greater than heated ones, the rate of achieving a specific compressive strength is more rapid for heated samples. An environmental and economic analysis showed that assuming an equal transportation cost, replacing metakaolin with an average amount of 10% seashell waste reduces the energy usage by 7% and the price by 2% to produce 1 ton of geopolymer and preserves the non-renewable sources of Kaolin clay and solves the problems related to seashell waste deposits. [ABSTRACT FROM AUTHOR]
Copyright of Clean Technologies & Environmental Policy is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: GreenFILE
Full text is not displayed to guests.
FullText Links:
  – Type: pdflink
Text:
  Availability: 1
Header DbId: 8gh
DbLabel: GreenFILE
An: 172445412
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Investigation on partially replacing metakaolin with marine shell waste to produce sustainable eco-friendly geopolymer mortars.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Saba%2C+Marianne%22">Saba, Marianne</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Tehrani%2C+Fateh+Fakhari%22">Tehrani, Fateh Fakhari</searchLink><relatesTo>2,3</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Hajikarimi%2C+Pouria%22">Hajikarimi, Pouria</searchLink><relatesTo>4</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Absi%2C+Joseph%22">Absi, Joseph</searchLink><relatesTo>5</relatesTo> (AUTHOR)<i> joseph.absi@unilim.fr</i>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Clean+Technologies+%26+Environmental+Policy%22">Clean Technologies & Environmental Policy</searchLink>. Oct2023, Vol. 25 Issue 8, p2639-2653. 15p.
– Name: Subject
  Label: Subject Terms
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Kaolin%22">Kaolin</searchLink><br /><searchLink fieldCode="DE" term="%22X-ray+spectroscopy%22">X-ray spectroscopy</searchLink><br /><searchLink fieldCode="DE" term="%22Elastic+modulus%22">Elastic modulus</searchLink><br /><searchLink fieldCode="DE" term="%22Mortar%22">Mortar</searchLink><br /><searchLink fieldCode="DE" term="%22Compressive+strength%22">Compressive strength</searchLink><br /><searchLink fieldCode="DE" term="%22Scanning+electron+microscopes%22">Scanning electron microscopes</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: This work focuses on the effect of the incorporation of marine shell waste in different mass substitution rates in geopolymer mortars as an efficient solution to overcome the problems related to this waste. In this paper, Lebanese metakaolin was used as the primary clay source of aluminosilicate for the geopolymer mortars. Then, a mass substitution of metakaolin with shell waste was drawn in terms of structure, synthesis mechanism, and parameters delimiting their performance. The chemical properties of all constituents were investigated using X-ray diffraction analysis and X-ray Fluorescence. Also, the microstructure analysis was observed by implementing a scanning electron microscope (SEM). The compressive strength and elasticity modulus were measured as two fundamental mechanical properties of geopolymer samples by highlighting the impact of curing conditions (non-heated and heated) after passing 1, 3, 7, 28, 90, 120, 180, and 360 days and the various substitution rates (0–20%). The results showed that the curing conditions and the various substitution rates of metakaolin with marine shells affected the microstructure and mechanical properties. Adding shell waste reduced the compressive strength for both non-heated and heated samples and slightly increased the elasticity modulus up to 10% for non-heated and for heated curing conditions. While the final compressive strengths of non-heated samples are greater than heated ones, the rate of achieving a specific compressive strength is more rapid for heated samples. An environmental and economic analysis showed that assuming an equal transportation cost, replacing metakaolin with an average amount of 10% seashell waste reduces the energy usage by 7% and the price by 2% to produce 1 ton of geopolymer and preserves the non-renewable sources of Kaolin clay and solves the problems related to seashell waste deposits. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Clean Technologies & Environmental Policy is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=8gh&AN=172445412
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1007/s10098-023-02512-4
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 15
        StartPage: 2639
    Subjects:
      – SubjectFull: Kaolin
        Type: general
      – SubjectFull: X-ray spectroscopy
        Type: general
      – SubjectFull: Elastic modulus
        Type: general
      – SubjectFull: Mortar
        Type: general
      – SubjectFull: Compressive strength
        Type: general
      – SubjectFull: Scanning electron microscopes
        Type: general
    Titles:
      – TitleFull: Investigation on partially replacing metakaolin with marine shell waste to produce sustainable eco-friendly geopolymer mortars.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Saba, Marianne
      – PersonEntity:
          Name:
            NameFull: Tehrani, Fateh Fakhari
      – PersonEntity:
          Name:
            NameFull: Hajikarimi, Pouria
      – PersonEntity:
          Name:
            NameFull: Absi, Joseph
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 10
              Text: Oct2023
              Type: published
              Y: 2023
          Identifiers:
            – Type: issn-print
              Value: 1618954X
          Numbering:
            – Type: volume
              Value: 25
            – Type: issue
              Value: 8
          Titles:
            – TitleFull: Clean Technologies & Environmental Policy
              Type: main
ResultId 1