Properties of low-formaldehyde-emission particleboard made from recycled wood-waste chips sprayed with PMDI/PF resin

Saved in:
Bibliographic Details
Title: Properties of low-formaldehyde-emission particleboard made from recycled wood-waste chips sprayed with PMDI/PF resin
Authors: Wang, Song-Yung1 sywang@ntu.edu.tw, Yang, Te-Hsin1 d90625006@ntu.edu.tw, Lin, Li-Ting1 inmoomni@yahoo.com.tw, Lin, Cheng-Jung2 d88625002@yahoo.com.tw, Tsai, Ming-Jer1 tmj@ntu.edu.tw
Source: Building & Environment. Jul2007, Vol. 42 Issue 7, p2472-2479. 8p.
Subject Terms: *Disinfection & disinfectants, *Formaldehyde, *Waste recycling, Strength of materials
Abstract: Abstract: The objective of this study was to manufacture low-formaldehyde-emission particleboard from recycled wood-waste chips using polymeric 4,4′-methylenediphenyl isocyanate (PMDI) and phenol-formaldehyde (PF) resins for use in indoor environments. The influence of PMDI/PF ratios in particles on the formaldehyde emission and its mechanical properties were investigated. The experimental results showed that the formaldehyde emission released decreased linearly with increasing PMDI/PF particle ratio. The relationship could be represented by a linear regression formula. Formaldehyde emission was below 0.3mg/L when the weight percentage of PMDI/particles was up to 70%. The formaldehyde emission from melamine-formaldehyde (MF) resin-impregnated paper-overlaid particleboard was 17% lower than that for particleboard. Moreover, the bending strength, internal bonding strength and screw holding strength increased with increasing PMDI/PF particle ratio. However, the percentage thickness swelling of the particleboard decreased with increasing PMDI/PF particle ratio. In addition, there were significant positive relationships between the ultrasonic velocity and the bending strength, internal bonding strength and screw holding strength of the particleboard, which allowed evaluation of the properties of the particleboard using ultrasonic velocity. [Copyright &y& Elsevier]
Copyright of Building & Environment is the property of Pergamon Press - An Imprint of Elsevier Science and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: GreenFILE
Description
Abstract:Abstract: The objective of this study was to manufacture low-formaldehyde-emission particleboard from recycled wood-waste chips using polymeric 4,4′-methylenediphenyl isocyanate (PMDI) and phenol-formaldehyde (PF) resins for use in indoor environments. The influence of PMDI/PF ratios in particles on the formaldehyde emission and its mechanical properties were investigated. The experimental results showed that the formaldehyde emission released decreased linearly with increasing PMDI/PF particle ratio. The relationship could be represented by a linear regression formula. Formaldehyde emission was below 0.3mg/L when the weight percentage of PMDI/particles was up to 70%. The formaldehyde emission from melamine-formaldehyde (MF) resin-impregnated paper-overlaid particleboard was 17% lower than that for particleboard. Moreover, the bending strength, internal bonding strength and screw holding strength increased with increasing PMDI/PF particle ratio. However, the percentage thickness swelling of the particleboard decreased with increasing PMDI/PF particle ratio. In addition, there were significant positive relationships between the ultrasonic velocity and the bending strength, internal bonding strength and screw holding strength of the particleboard, which allowed evaluation of the properties of the particleboard using ultrasonic velocity. [Copyright &y& Elsevier]
ISSN:03601323
DOI:10.1016/j.buildenv.2006.06.009