View in EDS

Modulation of surface electrical properties of epoxy resin insulator by changing fluorination temperature and time.

Saved in:
Bibliographic Details
Title: Modulation of surface electrical properties of epoxy resin insulator by changing fluorination temperature and time.
Authors: An, Zhenlian1, Yin, Qianqian2, Liu, Yaqiang2, Zheng, Feihu1, Lei, Qingquan3, Zhang, Yewen1
Source: IEEE Transactions on Dielectrics & Electrical Insulation. Feb2015, Vol. 22 Issue 1, p526-534. 9p.
Subjects: Epoxy insulators, Fluorination, Electronic modulation, Temperature measurements, Electric insulators & insulation, Epoxy resins
Abstract: In order to systematically investigate the modulating role of fluorination temperature and time on surface electrical properties of the epoxy resin insulator, epoxy resin sheets were surface fluorinated in a laboratory vessel using a F22/N22 mixture with 12.5% F22 by volume at 0.1 MPa and different temperatures of 25?95 ?C for different times of 5?120 min. Conductivity measurements have shown that the intrinsic surface conductivity of the epoxy resin insulator could be modulated from an even lower value to a nearly four orders of magnitude higher value than the value prior to fluorination by changing the fluorination temperature and time. Surface conductivity increased with increasing fluorination temperature at the same fluorination time, while decreased to some extent with increasing fluorination time at a given fluorination temperature. Surface potential decay measurements showed consistent results with the surface conductivity measurements. ATR-IR analyses revealed substantial changes in surface chemical composition and structure, depending on the fluorination temperature and time. SEM images clearly showed an increase of the fluorinated layer thickness with increasing fluorination temperature and time. Surface cracks appeared only at elevated fluorination temperatures and increased with fluorination temperature, while the surface became compact with the duration of the fluorination. These results, compared with the previous results on an epoxy resin insulator made of DGEBA epoxy resin with a lower epoxy value, also indicated a significant influence of the epoxy resin insulator itself or the epoxy resin raw material on surface electrical properties and surface physicochemical characteristics after fluorination. [ABSTRACT FROM AUTHOR]
Copyright of IEEE Transactions on Dielectrics & Electrical Insulation is the property of IEEE and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 100979747
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Modulation of surface electrical properties of epoxy resin insulator by changing fluorination temperature and time.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22An%2C+Zhenlian%22">An, Zhenlian</searchLink><relatesTo>1</relatesTo><br /><searchLink fieldCode="AR" term="%22Yin%2C+Qianqian%22">Yin, Qianqian</searchLink><relatesTo>2</relatesTo><br /><searchLink fieldCode="AR" term="%22Liu%2C+Yaqiang%22">Liu, Yaqiang</searchLink><relatesTo>2</relatesTo><br /><searchLink fieldCode="AR" term="%22Zheng%2C+Feihu%22">Zheng, Feihu</searchLink><relatesTo>1</relatesTo><br /><searchLink fieldCode="AR" term="%22Lei%2C+Qingquan%22">Lei, Qingquan</searchLink><relatesTo>3</relatesTo><br /><searchLink fieldCode="AR" term="%22Zhang%2C+Yewen%22">Zhang, Yewen</searchLink><relatesTo>1</relatesTo>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22IEEE+Transactions+on+Dielectrics+%26+Electrical+Insulation%22">IEEE Transactions on Dielectrics & Electrical Insulation</searchLink>. Feb2015, Vol. 22 Issue 1, p526-534. 9p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Epoxy+insulators%22">Epoxy insulators</searchLink><br /><searchLink fieldCode="DE" term="%22Fluorination%22">Fluorination</searchLink><br /><searchLink fieldCode="DE" term="%22Electronic+modulation%22">Electronic modulation</searchLink><br /><searchLink fieldCode="DE" term="%22Temperature+measurements%22">Temperature measurements</searchLink><br /><searchLink fieldCode="DE" term="%22Electric+insulators+%26+insulation%22">Electric insulators & insulation</searchLink><br /><searchLink fieldCode="DE" term="%22Epoxy+resins%22">Epoxy resins</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: In order to systematically investigate the modulating role of fluorination temperature and time on surface electrical properties of the epoxy resin insulator, epoxy resin sheets were surface fluorinated in a laboratory vessel using a F22/N22 mixture with 12.5% F22 by volume at 0.1 MPa and different temperatures of 25?95 ?C for different times of 5?120 min. Conductivity measurements have shown that the intrinsic surface conductivity of the epoxy resin insulator could be modulated from an even lower value to a nearly four orders of magnitude higher value than the value prior to fluorination by changing the fluorination temperature and time. Surface conductivity increased with increasing fluorination temperature at the same fluorination time, while decreased to some extent with increasing fluorination time at a given fluorination temperature. Surface potential decay measurements showed consistent results with the surface conductivity measurements. ATR-IR analyses revealed substantial changes in surface chemical composition and structure, depending on the fluorination temperature and time. SEM images clearly showed an increase of the fluorinated layer thickness with increasing fluorination temperature and time. Surface cracks appeared only at elevated fluorination temperatures and increased with fluorination temperature, while the surface became compact with the duration of the fluorination. These results, compared with the previous results on an epoxy resin insulator made of DGEBA epoxy resin with a lower epoxy value, also indicated a significant influence of the epoxy resin insulator itself or the epoxy resin raw material on surface electrical properties and surface physicochemical characteristics after fluorination. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of IEEE Transactions on Dielectrics & Electrical Insulation is the property of IEEE and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=100979747
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1109/TDEI.2014.004551
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 9
        StartPage: 526
    Subjects:
      – SubjectFull: Epoxy insulators
        Type: general
      – SubjectFull: Fluorination
        Type: general
      – SubjectFull: Electronic modulation
        Type: general
      – SubjectFull: Temperature measurements
        Type: general
      – SubjectFull: Electric insulators & insulation
        Type: general
      – SubjectFull: Epoxy resins
        Type: general
    Titles:
      – TitleFull: Modulation of surface electrical properties of epoxy resin insulator by changing fluorination temperature and time.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: An, Zhenlian
      – PersonEntity:
          Name:
            NameFull: Yin, Qianqian
      – PersonEntity:
          Name:
            NameFull: Liu, Yaqiang
      – PersonEntity:
          Name:
            NameFull: Zheng, Feihu
      – PersonEntity:
          Name:
            NameFull: Lei, Qingquan
      – PersonEntity:
          Name:
            NameFull: Zhang, Yewen
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 02
              Text: Feb2015
              Type: published
              Y: 2015
          Identifiers:
            – Type: issn-print
              Value: 10709878
          Numbering:
            – Type: volume
              Value: 22
            – Type: issue
              Value: 1
          Titles:
            – TitleFull: IEEE Transactions on Dielectrics & Electrical Insulation
              Type: main
ResultId 1