Development of a powder metallurgical self cooling forging die with inner cavities.
Saved in:
| Title: | Development of a powder metallurgical self cooling forging die with inner cavities. |
|---|---|
| Authors: | Behrens, B.-A.1, Kammler, M.1, Klassen, A.1, Vahed, N.1, Bonhage, M.1 bonhage@ifum.uni-hannover.de |
| Source: | Interdisciplinarity in Engineering. 2014, Vol. 15, p456-464. 9p. |
| Subjects: | Powder metallurgy, Manufacturing processes, Sintering, Cooling, Temperature |
| Abstract: | Powder metallurgy is known for its high potential for producing near net-shape products. A material utilization of up to 95 %, paired with comparably low energy costs, allows powder metallurgy to fulfil the requirements of modern manufacturing processes. By combining different powders, a wide range of products can be manufactured. An innovative powder metallurgical method currently being investigated at the Institute of Forming Technology and Machines (IFUM) within the subproject E3 of the Collaborative Research Centre 653 is the generation of controlled cavities inside a sintered part. For this purpose, a foreign element with a lower melting point than the base powder is embedded inside the green body. Depending on the sintering temperature, the foreign element can be firmly bonded with or melted out of the base powder, creating a defined cavity. Being attached to an external cooling system, the cavity can be applied as a closed circuit for circulating a cooling medium within the tool. The approach in this work is the development of a sintered forging die, equipped with an active temperature regulation which can react autonomously to process variations. The cooling temperature is controlled by measuring the operating temperature within the forging die. For measuring purposes, the cavities can also be used for integrating temperature sensors. The main aspect of these studies is the characterization of the compaction and melting behavior of the foreign material. Since the location of the foreign element within the base powder can differ due to the pressing force, the prediction of its final position based on the initial position and the process conditions is of high importance. For this aim, numerical simulations are employed to develop an optimized cooling layout. A numerical model is used to describe the compaction behaviour of the powder as an elastoplastic compressible continuum and its interdependency with the integrated elements. The studies also cover the influence of surface contours of the foreign elements (corrugated, plain) on their melting behavior as well as the resulting inner surface of the cooling channel. [ABSTRACT FROM AUTHOR] |
| Copyright of Interdisciplinarity in Engineering is the property of University of Medicine, Pharmacy, Sciences and Technology of Tîrgu Mures and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
| FullText | Links: – Type: pdflink Text: Availability: 0 |
|---|---|
| Header | DbId: egs DbLabel: Engineering Source An: 102684930 AccessLevel: 6 PubType: Conference PubTypeId: conference PreciseRelevancyScore: 0 |
| IllustrationInfo | |
| Items | – Name: Title Label: Title Group: Ti Data: Development of a powder metallurgical self cooling forging die with inner cavities. – Name: Author Label: Authors Group: Au Data: <searchLink fieldCode="AR" term="%22Behrens%2C+B%2E-A%2E%22">Behrens, B.-A.</searchLink><relatesTo>1</relatesTo><br /><searchLink fieldCode="AR" term="%22Kammler%2C+M%2E%22">Kammler, M.</searchLink><relatesTo>1</relatesTo><br /><searchLink fieldCode="AR" term="%22Klassen%2C+A%2E%22">Klassen, A.</searchLink><relatesTo>1</relatesTo><br /><searchLink fieldCode="AR" term="%22Vahed%2C+N%2E%22">Vahed, N.</searchLink><relatesTo>1</relatesTo><br /><searchLink fieldCode="AR" term="%22Bonhage%2C+M%2E%22">Bonhage, M.</searchLink><relatesTo>1</relatesTo><i> bonhage@ifum.uni-hannover.de</i> – Name: TitleSource Label: Source Group: Src Data: <searchLink fieldCode="JN" term="%22Interdisciplinarity+in+Engineering%22">Interdisciplinarity in Engineering</searchLink>. 2014, Vol. 15, p456-464. 9p. – Name: Subject Label: Subjects Group: Su Data: <searchLink fieldCode="DE" term="%22Powder+metallurgy%22">Powder metallurgy</searchLink><br /><searchLink fieldCode="DE" term="%22Manufacturing+processes%22">Manufacturing processes</searchLink><br /><searchLink fieldCode="DE" term="%22Sintering%22">Sintering</searchLink><br /><searchLink fieldCode="DE" term="%22Cooling%22">Cooling</searchLink><br /><searchLink fieldCode="DE" term="%22Temperature%22">Temperature</searchLink> – Name: Abstract Label: Abstract Group: Ab Data: Powder metallurgy is known for its high potential for producing near net-shape products. A material utilization of up to 95 %, paired with comparably low energy costs, allows powder metallurgy to fulfil the requirements of modern manufacturing processes. By combining different powders, a wide range of products can be manufactured. An innovative powder metallurgical method currently being investigated at the Institute of Forming Technology and Machines (IFUM) within the subproject E3 of the Collaborative Research Centre 653 is the generation of controlled cavities inside a sintered part. For this purpose, a foreign element with a lower melting point than the base powder is embedded inside the green body. Depending on the sintering temperature, the foreign element can be firmly bonded with or melted out of the base powder, creating a defined cavity. Being attached to an external cooling system, the cavity can be applied as a closed circuit for circulating a cooling medium within the tool. The approach in this work is the development of a sintered forging die, equipped with an active temperature regulation which can react autonomously to process variations. The cooling temperature is controlled by measuring the operating temperature within the forging die. For measuring purposes, the cavities can also be used for integrating temperature sensors. The main aspect of these studies is the characterization of the compaction and melting behavior of the foreign material. Since the location of the foreign element within the base powder can differ due to the pressing force, the prediction of its final position based on the initial position and the process conditions is of high importance. For this aim, numerical simulations are employed to develop an optimized cooling layout. A numerical model is used to describe the compaction behaviour of the powder as an elastoplastic compressible continuum and its interdependency with the integrated elements. The studies also cover the influence of surface contours of the foreign elements (corrugated, plain) on their melting behavior as well as the resulting inner surface of the cooling channel. [ABSTRACT FROM AUTHOR] – Name: AbstractSuppliedCopyright Label: Group: Ab Data: <i>Copyright of Interdisciplinarity in Engineering is the property of University of Medicine, Pharmacy, Sciences and Technology of Tîrgu Mures and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.) |
| PLink | https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=102684930 |
| RecordInfo | BibRecord: BibEntity: Identifiers: – Type: doi Value: 10.1016/j.protcy.2014.09.005 Languages: – Code: eng Text: English PhysicalDescription: Pagination: PageCount: 9 StartPage: 456 Subjects: – SubjectFull: Powder metallurgy Type: general – SubjectFull: Manufacturing processes Type: general – SubjectFull: Sintering Type: general – SubjectFull: Cooling Type: general – SubjectFull: Temperature Type: general Titles: – TitleFull: Development of a powder metallurgical self cooling forging die with inner cavities. Type: main BibRelationships: HasContributorRelationships: – PersonEntity: Name: NameFull: Behrens, B.-A. – PersonEntity: Name: NameFull: Kammler, M. – PersonEntity: Name: NameFull: Klassen, A. – PersonEntity: Name: NameFull: Vahed, N. – PersonEntity: Name: NameFull: Bonhage, M. IsPartOfRelationships: – BibEntity: Dates: – D: 01 M: 07 Text: 2014 Type: published Y: 2014 Identifiers: – Type: issn-print Value: 22850945 Numbering: – Type: volume Value: 15 Titles: – TitleFull: Interdisciplinarity in Engineering Type: main |
| ResultId | 1 |
