View in EDS

Highly porous, ultra-low refractive index coatings produced through random packing of silicated cellulose nanocrystals.

Saved in:
Bibliographic Details
Title: Highly porous, ultra-low refractive index coatings produced through random packing of silicated cellulose nanocrystals.
Authors: Buskens, Pascal1,2 buskens@dwi.rwth-aachen.de, Mourad, Maurice1, Meulendijks, Nicole1, van Ee, Renz1, Burghoorn, Marieke1, Verheijen, Marcel3,4, van Veldhoven, Emile1
Source: Colloids & Surfaces A: Physicochemical & Engineering Aspects. Dec2015, Vol. 487, p1-8. 8p.
Subjects: Refractive index, Surface coatings, Cellulose nanocrystals, Silica rods, Pyrolysis
Abstract: The use of cellulose nanocrystals (CNCs) in optical materials has been extensively studied. Key in most applications reported to date is the chiral nematic ordering of CNCs. Here, we demonstrate that random packing of silicated CNCs can also yield materials with interesting optical properties, i.e. , highly porous, ultra-low refractive index coatings. Needle-shaped CNCs with an aspect ratio of 25 were extracted from Avicel, and subsequently covered with a silica layer. In one single dip coating step, highly porous coatings of CNC-silica core–shell particles were deposited on glass slides and silicon wafers. The lowest refractive index achieved was 1.03, which corresponds to a porosity of 94%; the thickness of these coatings ranged from 101 nm to 239 nm. The substrates, coated with a layer of CNC-silica core–shell particles, were heated to 450 °C for two hours. Cellulose was removed through pyrolysis, which resulted in porous coatings of sub-micron sized hollow silica rods. The porosity increase generated through pyrolysis of cellulose, however, was largely compensated by the decrease in packing porosity due to shrinkage of the coating. [ABSTRACT FROM AUTHOR]
Copyright of Colloids & Surfaces A: Physicochemical & Engineering Aspects is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Description
Abstract:The use of cellulose nanocrystals (CNCs) in optical materials has been extensively studied. Key in most applications reported to date is the chiral nematic ordering of CNCs. Here, we demonstrate that random packing of silicated CNCs can also yield materials with interesting optical properties, i.e. , highly porous, ultra-low refractive index coatings. Needle-shaped CNCs with an aspect ratio of 25 were extracted from Avicel, and subsequently covered with a silica layer. In one single dip coating step, highly porous coatings of CNC-silica core–shell particles were deposited on glass slides and silicon wafers. The lowest refractive index achieved was 1.03, which corresponds to a porosity of 94%; the thickness of these coatings ranged from 101 nm to 239 nm. The substrates, coated with a layer of CNC-silica core–shell particles, were heated to 450 °C for two hours. Cellulose was removed through pyrolysis, which resulted in porous coatings of sub-micron sized hollow silica rods. The porosity increase generated through pyrolysis of cellulose, however, was largely compensated by the decrease in packing porosity due to shrinkage of the coating. [ABSTRACT FROM AUTHOR]
ISSN:09277757
DOI:10.1016/j.colsurfa.2015.09.041