An Energy-Efficient Programmable Manycore Accelerator for Personalized Biomedical Applications.
Saved in:
| Title: | An Energy-Efficient Programmable Manycore Accelerator for Personalized Biomedical Applications. |
|---|---|
| Authors: | Kulkarni, Adwaya1, Page, Adam1, Attaran, Nasrin1, Jafari, Ali1, Malik, Maria2, Homayoun, Houman2, Mohsenin, Tinoosh1 |
| Source: | IEEE Transactions on Very Large Scale Integration (VLSI) Systems. Jan2018, Vol. 26 Issue 1, p96-109. 14p. |
| Subjects: | Biomedical engineering, Programmable logic devices, Wearable technology |
| Abstract: | Wearable personalized health monitoring systems can offer a cost-effective solution for human health care. These systems must constantly monitor patients’ physiological signals and provide highly accurate, and quick processing and delivery of the vast amount of data within a limited power and area footprint. These personalized biomedical applications require sampling and processing multiple streams of physiological signals with a varying number of channels and sampling rates. The processing typically consists of feature extraction, data fusion, and classification stages that require a large number of digital signal processing (DSP) and machine learning (ML) kernels. In response to these requirements, in this paper, a tiny, energy-efficient, and domain-specific manycore accelerator referred to as power-efficient nanoclusters (PENC) is proposed to map and execute the kernels of these applications. Simulation results show that the PENC is able to reduce energy consumption by up to 80% and 25% for DSP and ML kernels, respectively, when optimally parallelized. In addition, we fully implemented three compute-intensive personalized biomedical applications, namely, multichannel seizure detection, multiphysiological stress detection, and standalone tongue drive system (sTDS), to evaluate the proposed manycore performance relative to commodity embedded CPU, graphical processing unit (GPU), and field-programmable gate array (FPGA)-based implementations. For these three case studies, the energy consumption and the performance of the proposed PENC manycore, when acting as an accelerator along with an Intel Atom processor as a host, are compared with the existing commercial off-the-shelf general-purpose, customizable, and programmable embedded platforms, including Intel Atom, Xilinx Artix-7 FPGA, and NVIDIA TK1 advanced RISC machine -A15 and K1 GPU system on a chip. For these applications, the PENC manycore is able to significantly improve throughput and energy efficiency by up to 1872\times and 276\times , respectively. For the most computational intensive application of seizure detection, the PENC manycore is able to achieve a throughput of 15.22 giga-operations-per-second (GOPs), which is a 14\times improvement in throughput over custom FPGA solution. For stress detection, the PENC achieves a throughput of 21.36 GOPs and an energy efficiency of 4.23 GOP/J, which is 14.87\times and 2.28\times better over FPGA implementation, respectively. For the sTDS application, the PENC improves a throughput by 5.45\times and an energy efficiency by 2.37\times over FPGA implementation. [ABSTRACT FROM PUBLISHER] |
| Copyright of IEEE Transactions on Very Large Scale Integration (VLSI) Systems is the property of IEEE and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
| Abstract: | Wearable personalized health monitoring systems can offer a cost-effective solution for human health care. These systems must constantly monitor patients’ physiological signals and provide highly accurate, and quick processing and delivery of the vast amount of data within a limited power and area footprint. These personalized biomedical applications require sampling and processing multiple streams of physiological signals with a varying number of channels and sampling rates. The processing typically consists of feature extraction, data fusion, and classification stages that require a large number of digital signal processing (DSP) and machine learning (ML) kernels. In response to these requirements, in this paper, a tiny, energy-efficient, and domain-specific manycore accelerator referred to as power-efficient nanoclusters (PENC) is proposed to map and execute the kernels of these applications. Simulation results show that the PENC is able to reduce energy consumption by up to 80% and 25% for DSP and ML kernels, respectively, when optimally parallelized. In addition, we fully implemented three compute-intensive personalized biomedical applications, namely, multichannel seizure detection, multiphysiological stress detection, and standalone tongue drive system (sTDS), to evaluate the proposed manycore performance relative to commodity embedded CPU, graphical processing unit (GPU), and field-programmable gate array (FPGA)-based implementations. For these three case studies, the energy consumption and the performance of the proposed PENC manycore, when acting as an accelerator along with an Intel Atom processor as a host, are compared with the existing commercial off-the-shelf general-purpose, customizable, and programmable embedded platforms, including Intel Atom, Xilinx Artix-7 FPGA, and NVIDIA TK1 advanced RISC machine -A15 and K1 GPU system on a chip. For these applications, the PENC manycore is able to significantly improve throughput and energy efficiency by up to 1872\times and 276\times , respectively. For the most computational intensive application of seizure detection, the PENC manycore is able to achieve a throughput of 15.22 giga-operations-per-second (GOPs), which is a 14\times improvement in throughput over custom FPGA solution. For stress detection, the PENC achieves a throughput of 21.36 GOPs and an energy efficiency of 4.23 GOP/J, which is 14.87\times and 2.28\times better over FPGA implementation, respectively. For the sTDS application, the PENC improves a throughput by 5.45\times and an energy efficiency by 2.37\times over FPGA implementation. [ABSTRACT FROM PUBLISHER] |
|---|---|
| ISSN: | 10638210 |
| DOI: | 10.1109/TVLSI.2017.2754272 |
