View in EDS

Surface-based 3D measurements of small aeolian bedforms on Mars and implications for estimating ExoMars rover traversability hazards.

Saved in:
Bibliographic Details
Title: Surface-based 3D measurements of small aeolian bedforms on Mars and implications for estimating ExoMars rover traversability hazards.
Authors: Balme, Matt1 Matt.balme@open.ac.uk, Robson, Ellen2, Barnes, Rob3, Butcher, Frances1, Fawdon, Peter1, Huber, Ben4, Ortner, Thomas5, Paar, Gerhard4, Traxler, Christoph5, Bridges, John6, Gupta, Sanjeev3, Vago, Jorge L.7
Source: Planetary & Space Science. Apr2018, Vol. 153, p39-53. 15p.
Subjects: Ergs (Landforms), Stereo image processing, Geomorphology, Three-dimensional display systems, Mars (Planet)
Abstract: Recent aeolian bedforms comprising loose sand are common on the martian surface and provide a mobility hazard to Mars rovers. The ExoMars rover will launch in 2020 to one of two candidate sites: Mawrth Vallis or Oxia Planum. Both sites contain numerous aeolian bedforms with simple ripple-like morphologies. The larger examples are ‘Transverse Aeolian Ridges’ (TARs), which stereo imaging analyses have shown to be a few metres high and up to a few tens of metres across. Where they occur, TARs therefore present a serious, but recognized and avoidable, rover mobility hazard. There also exists a population of smaller bedforms of similar morphology, but it is unknown whether these bedforms will be traversable by the ExoMars rover. We informally refer to these bedforms as “mini-TARs”, as they are about an order of magnitude smaller than most TARs observed to date. They are more abundant than TARs in the Oxia Planum site, and can be pervasive in areas. The aim of this paper is to estimate the heights of these features, which are too small to measured using High Resolution Imaging Science Experiment (HiRISE) Digital Elevation Models (DEMs), from orbital data alone. Thereby, we aim to increase our knowledge of the hazards in the proposed ExoMars landing sites. We propose a methodology to infer the height of these mini-TARs based on comparisons with similar features observed by previous Mars rovers. We use rover-based stereo imaging from the NASA Mars Exploration Rover (MER) Opportunity and PRo3D software, a 3D visualisation and analysis tool, to measure the size and height of mini-TARs in the Meridiani Planum region of Mars. These are good analogues for the smaller bedforms at the ExoMars rover candidate landing sites. We show that bedform height scales linearly with length (as measured across the bedform, perpendicular to the crest ridge) with a ratio of about 1:15. We also measured the lengths of many of the smaller aeolian bedforms in the ExoMars rover Oxia Planum candidate landing site, and find that they are similar to those of the Meridiani Planum mini-TARs. Assuming that the Oxia Planum bedforms have the same length/height ratio as the MER Opportunity mini-TARs, we combine these data to provide a probabilistic method of inferring the heights of bedforms at the Oxia Planum site. These data can then be used to explore the likely traversability of this site. For example, our method suggests that most of the bedforms studied in Oxia Planum have ridge crests higher than 15 cm, but lower than 25 cm. Hence, if the tallest bedforms the ExoMars rover will be able to safely cross are only 15 cm high, then the Oxia Planum sites studied here contain mostly impassable bedforms. However, if the rover can safely traverse 25 cm high bedforms, then most bedforms here will be smaller than this threshold. As an additional outcome, our results show that the mini-TARs have length/height ratios similar to TARs in general. Hence, these bedforms could probably be classified simply as “small TARs”, rather than forming a discrete population or sub-type of aeolian bedforms. [ABSTRACT FROM AUTHOR]
Copyright of Planetary & Space Science is the property of Pergamon Press - An Imprint of Elsevier Science and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 128287340
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Surface-based 3D measurements of small aeolian bedforms on Mars and implications for estimating ExoMars rover traversability hazards.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Balme%2C+Matt%22">Balme, Matt</searchLink><relatesTo>1</relatesTo><i> Matt.balme@open.ac.uk</i><br /><searchLink fieldCode="AR" term="%22Robson%2C+Ellen%22">Robson, Ellen</searchLink><relatesTo>2</relatesTo><br /><searchLink fieldCode="AR" term="%22Barnes%2C+Rob%22">Barnes, Rob</searchLink><relatesTo>3</relatesTo><br /><searchLink fieldCode="AR" term="%22Butcher%2C+Frances%22">Butcher, Frances</searchLink><relatesTo>1</relatesTo><br /><searchLink fieldCode="AR" term="%22Fawdon%2C+Peter%22">Fawdon, Peter</searchLink><relatesTo>1</relatesTo><br /><searchLink fieldCode="AR" term="%22Huber%2C+Ben%22">Huber, Ben</searchLink><relatesTo>4</relatesTo><br /><searchLink fieldCode="AR" term="%22Ortner%2C+Thomas%22">Ortner, Thomas</searchLink><relatesTo>5</relatesTo><br /><searchLink fieldCode="AR" term="%22Paar%2C+Gerhard%22">Paar, Gerhard</searchLink><relatesTo>4</relatesTo><br /><searchLink fieldCode="AR" term="%22Traxler%2C+Christoph%22">Traxler, Christoph</searchLink><relatesTo>5</relatesTo><br /><searchLink fieldCode="AR" term="%22Bridges%2C+John%22">Bridges, John</searchLink><relatesTo>6</relatesTo><br /><searchLink fieldCode="AR" term="%22Gupta%2C+Sanjeev%22">Gupta, Sanjeev</searchLink><relatesTo>3</relatesTo><br /><searchLink fieldCode="AR" term="%22Vago%2C+Jorge+L%2E%22">Vago, Jorge L.</searchLink><relatesTo>7</relatesTo>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Planetary+%26+Space+Science%22">Planetary & Space Science</searchLink>. Apr2018, Vol. 153, p39-53. 15p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Ergs+%28Landforms%29%22">Ergs (Landforms)</searchLink><br /><searchLink fieldCode="DE" term="%22Stereo+image+processing%22">Stereo image processing</searchLink><br /><searchLink fieldCode="DE" term="%22Geomorphology%22">Geomorphology</searchLink><br /><searchLink fieldCode="DE" term="%22Three-dimensional+display+systems%22">Three-dimensional display systems</searchLink><br /><searchLink fieldCode="DE" term="%22Mars+%28Planet%29%22">Mars (Planet)</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: Recent aeolian bedforms comprising loose sand are common on the martian surface and provide a mobility hazard to Mars rovers. The ExoMars rover will launch in 2020 to one of two candidate sites: Mawrth Vallis or Oxia Planum. Both sites contain numerous aeolian bedforms with simple ripple-like morphologies. The larger examples are ‘Transverse Aeolian Ridges’ (TARs), which stereo imaging analyses have shown to be a few metres high and up to a few tens of metres across. Where they occur, TARs therefore present a serious, but recognized and avoidable, rover mobility hazard. There also exists a population of smaller bedforms of similar morphology, but it is unknown whether these bedforms will be traversable by the ExoMars rover. We informally refer to these bedforms as “mini-TARs”, as they are about an order of magnitude smaller than most TARs observed to date. They are more abundant than TARs in the Oxia Planum site, and can be pervasive in areas. The aim of this paper is to estimate the heights of these features, which are too small to measured using High Resolution Imaging Science Experiment (HiRISE) Digital Elevation Models (DEMs), from orbital data alone. Thereby, we aim to increase our knowledge of the hazards in the proposed ExoMars landing sites. We propose a methodology to infer the height of these mini-TARs based on comparisons with similar features observed by previous Mars rovers. We use rover-based stereo imaging from the NASA Mars Exploration Rover (MER) Opportunity and PRo3D software, a 3D visualisation and analysis tool, to measure the size and height of mini-TARs in the Meridiani Planum region of Mars. These are good analogues for the smaller bedforms at the ExoMars rover candidate landing sites. We show that bedform height scales linearly with length (as measured across the bedform, perpendicular to the crest ridge) with a ratio of about 1:15. We also measured the lengths of many of the smaller aeolian bedforms in the ExoMars rover Oxia Planum candidate landing site, and find that they are similar to those of the Meridiani Planum mini-TARs. Assuming that the Oxia Planum bedforms have the same length/height ratio as the MER Opportunity mini-TARs, we combine these data to provide a probabilistic method of inferring the heights of bedforms at the Oxia Planum site. These data can then be used to explore the likely traversability of this site. For example, our method suggests that most of the bedforms studied in Oxia Planum have ridge crests higher than 15 cm, but lower than 25 cm. Hence, if the tallest bedforms the ExoMars rover will be able to safely cross are only 15 cm high, then the Oxia Planum sites studied here contain mostly impassable bedforms. However, if the rover can safely traverse 25 cm high bedforms, then most bedforms here will be smaller than this threshold. As an additional outcome, our results show that the mini-TARs have length/height ratios similar to TARs in general. Hence, these bedforms could probably be classified simply as “small TARs”, rather than forming a discrete population or sub-type of aeolian bedforms. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Planetary & Space Science is the property of Pergamon Press - An Imprint of Elsevier Science and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=128287340
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1016/j.pss.2017.12.008
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 15
        StartPage: 39
    Subjects:
      – SubjectFull: Ergs (Landforms)
        Type: general
      – SubjectFull: Stereo image processing
        Type: general
      – SubjectFull: Geomorphology
        Type: general
      – SubjectFull: Three-dimensional display systems
        Type: general
      – SubjectFull: Mars (Planet)
        Type: general
    Titles:
      – TitleFull: Surface-based 3D measurements of small aeolian bedforms on Mars and implications for estimating ExoMars rover traversability hazards.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Balme, Matt
      – PersonEntity:
          Name:
            NameFull: Robson, Ellen
      – PersonEntity:
          Name:
            NameFull: Barnes, Rob
      – PersonEntity:
          Name:
            NameFull: Butcher, Frances
      – PersonEntity:
          Name:
            NameFull: Fawdon, Peter
      – PersonEntity:
          Name:
            NameFull: Huber, Ben
      – PersonEntity:
          Name:
            NameFull: Ortner, Thomas
      – PersonEntity:
          Name:
            NameFull: Paar, Gerhard
      – PersonEntity:
          Name:
            NameFull: Traxler, Christoph
      – PersonEntity:
          Name:
            NameFull: Bridges, John
      – PersonEntity:
          Name:
            NameFull: Gupta, Sanjeev
      – PersonEntity:
          Name:
            NameFull: Vago, Jorge L.
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 04
              Text: Apr2018
              Type: published
              Y: 2018
          Identifiers:
            – Type: issn-print
              Value: 00320633
          Numbering:
            – Type: volume
              Value: 153
          Titles:
            – TitleFull: Planetary & Space Science
              Type: main
ResultId 1