Room temperature carbon monoxide gas sensor using Cu doped OMS-2 nanofibers.
Saved in:
| Title: | Room temperature carbon monoxide gas sensor using Cu doped OMS-2 nanofibers. |
|---|---|
| Authors: | Kumar, Robin1,2, Mittal, Jagjiwan1 jmittal@amity.edu, Kushwaha, Neelam1, Rao, Bruno V.1, Pandey, Shifa1,3, Liu, Chuan-Pu3,4 |
| Source: | Sensors & Actuators B: Chemical. Aug2018, Vol. 266, p751-760. 10p. |
| Subjects: | Carbon monoxide, Nanofibers, Detector circuits, Temperature, Doping agents (Chemistry) |
| Abstract: | A reversible resistive gas sensor was developed for detecting low amount of carbon monoxide (<35 ppm) in air rapidly at room temperature using Cu doped cryptomelane octahedral molecular sieves (Cu-OMS-2) nanofibers. Sensor showed the quick response of 18% and 33% in 55 s when exposed to 10 ppm and 100 ppm of CO gas, respectively and recovered to the original value in ∼42 s after the removal of CO source. No heating was required either for sensing or recovery. The sensor film displayed good repeatability for multiple exposures of CO at room temperature. The nanofibers were developed using a simple method and showed high selectivity for CO. Adsorption of CO at the Cu-O-Mn site and resonance between Cu 2+ and Mn 4+ is proposed to be responsible for high sensitivity and selectivity of Cu-OMS-2. [ABSTRACT FROM AUTHOR] |
| Copyright of Sensors & Actuators B: Chemical is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
Be the first to leave a comment!
