View in EDS HTML Full Text PDF Full Text

Process Analysis and Trial Tests for Hot-Rolled Stainless Steel/Carbon Steel Clad Plates.

Saved in:
Bibliographic Details
Title: Process Analysis and Trial Tests for Hot-Rolled Stainless Steel/Carbon Steel Clad Plates.
Authors: Chen, Z. Y.1,2 (AUTHOR) chenzhenye@hbisco.com, Li, J. X.2 (AUTHOR), Lin, Z. G.2 (AUTHOR), Qi, J. J.2 (AUTHOR), Sun, L.2 (AUTHOR), Wang, G. D.1 (AUTHOR)
Source: Strength of Materials. Jan2019, Vol. 51 Issue 1, p26-31. 6p. 6 Diagrams, 4 Charts.
Subjects: Stainless steel testing, Iron & steel plates, Carbon steel, Shear strength, Pilot plants, Tensile strength, Stainless steel
Geographic Terms: United Kingdom
Abstract: The trials of 304 stainless steel-clad plate made of plain Q345B carbon steel were performed on hot-rolling line of the Hesteel Group. After the two runs of pilot production, the key process parameters for the stainless steel/carbon steel clad plate were found to meet the GB/T 8165-2008 requirements. The interface shear strength of the clad plate was higher than 360 MPa, the yield strength of the final product was over 257 MPa, the clad plate tensile strength and elongation exceeded 351 MPa and 39.8%, respectively. The interpenetration of stainless steel and plain carbon steel layers was established to be complete, with the adequate composite interface. The tensile and shear properties of stainless steel-clad plates produced by the rolling process were at the same level as those obtained via the explosive method as an alternative, while their production cost were somewhat reduced. [ABSTRACT FROM AUTHOR]
Copyright of Strength of Materials is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Full text is not displayed to guests.
FullText Links:
  – Type: pdflink
Text:
  Availability: 1
Header DbId: egs
DbLabel: Engineering Source
An: 141476441
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Process Analysis and Trial Tests for Hot-Rolled Stainless Steel/Carbon Steel Clad Plates.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Chen%2C+Z%2E+Y%2E%22">Chen, Z. Y.</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<i> chenzhenye@hbisco.com</i><br /><searchLink fieldCode="AR" term="%22Li%2C+J%2E+X%2E%22">Li, J. X.</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Lin%2C+Z%2E+G%2E%22">Lin, Z. G.</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Qi%2C+J%2E+J%2E%22">Qi, J. J.</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Sun%2C+L%2E%22">Sun, L.</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Wang%2C+G%2E+D%2E%22">Wang, G. D.</searchLink><relatesTo>1</relatesTo> (AUTHOR)
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Strength+of+Materials%22">Strength of Materials</searchLink>. Jan2019, Vol. 51 Issue 1, p26-31. 6p. 6 Diagrams, 4 Charts.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Stainless+steel+testing%22">Stainless steel testing</searchLink><br /><searchLink fieldCode="DE" term="%22Iron+%26+steel+plates%22">Iron & steel plates</searchLink><br /><searchLink fieldCode="DE" term="%22Carbon+steel%22">Carbon steel</searchLink><br /><searchLink fieldCode="DE" term="%22Shear+strength%22">Shear strength</searchLink><br /><searchLink fieldCode="DE" term="%22Pilot+plants%22">Pilot plants</searchLink><br /><searchLink fieldCode="DE" term="%22Tensile+strength%22">Tensile strength</searchLink><br /><searchLink fieldCode="DE" term="%22Stainless+steel%22">Stainless steel</searchLink>
– Name: SubjectGeographic
  Label: Geographic Terms
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22United+Kingdom%22">United Kingdom</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: The trials of 304 stainless steel-clad plate made of plain Q345B carbon steel were performed on hot-rolling line of the Hesteel Group. After the two runs of pilot production, the key process parameters for the stainless steel/carbon steel clad plate were found to meet the GB/T 8165-2008 requirements. The interface shear strength of the clad plate was higher than 360 MPa, the yield strength of the final product was over 257 MPa, the clad plate tensile strength and elongation exceeded 351 MPa and 39.8%, respectively. The interpenetration of stainless steel and plain carbon steel layers was established to be complete, with the adequate composite interface. The tensile and shear properties of stainless steel-clad plates produced by the rolling process were at the same level as those obtained via the explosive method as an alternative, while their production cost were somewhat reduced. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Strength of Materials is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=141476441
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1007/s11223-019-00046-z
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 6
        StartPage: 26
    Subjects:
      – SubjectFull: Stainless steel testing
        Type: general
      – SubjectFull: Iron & steel plates
        Type: general
      – SubjectFull: Carbon steel
        Type: general
      – SubjectFull: Shear strength
        Type: general
      – SubjectFull: Pilot plants
        Type: general
      – SubjectFull: Tensile strength
        Type: general
      – SubjectFull: Stainless steel
        Type: general
      – SubjectFull: United Kingdom
        Type: general
    Titles:
      – TitleFull: Process Analysis and Trial Tests for Hot-Rolled Stainless Steel/Carbon Steel Clad Plates.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Chen, Z. Y.
      – PersonEntity:
          Name:
            NameFull: Li, J. X.
      – PersonEntity:
          Name:
            NameFull: Lin, Z. G.
      – PersonEntity:
          Name:
            NameFull: Qi, J. J.
      – PersonEntity:
          Name:
            NameFull: Sun, L.
      – PersonEntity:
          Name:
            NameFull: Wang, G. D.
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 01
              Text: Jan2019
              Type: published
              Y: 2019
          Identifiers:
            – Type: issn-print
              Value: 00392316
          Numbering:
            – Type: volume
              Value: 51
            – Type: issue
              Value: 1
          Titles:
            – TitleFull: Strength of Materials
              Type: main
ResultId 1