View in EDS

Deposition and characterization of a sol-gel Mg-substituted fluorapatite coating with new stoichiometries.

Saved in:
Bibliographic Details
Title: Deposition and characterization of a sol-gel Mg-substituted fluorapatite coating with new stoichiometries.
Authors: Ferreira, J.M.1,2 (AUTHOR) jmfj@ufb.br, Rajendran, V.3 (AUTHOR), Simonelli, G.1 (AUTHOR) gsimonelli@ufba.br, Silva, A.C.M.1 (AUTHOR) acristinasilva@ufba.br, Santos, L.C.L.1 (AUTHOR) lclsantos@ufba.br, Mattedi, S.1 (AUTHOR), Pontes, L.A.M.1 (AUTHOR) uolpontes@uol.com.br, Costa, I.4 (AUTHOR) icosta@ipen.br, Rossi, J.L.4 (AUTHOR) jelrossi@ipen.br, Baker, M.A.3 (AUTHOR) m.baker@surrey.ac.uk
Source: Applied Surface Science. Mar2020, Vol. 505, pN.PAG-N.PAG. 1p.
Subjects: Stoichiometry, Electrophoretic deposition, Electrolytic corrosion, X-ray photoelectron spectroscopy, Fluorapatite, Surface coatings, Physiologic salines, Scanning electron microscopy
Abstract: • The sol-gel fluorapatite and Mg-substituted (6% and 7% of Mg) fluorapatite coatings on stainless steel were obtained. • After 100 h exposed to simulated body solution Mg-substituted fluorapatite coating with 7% of magnesium presents highest corrosion resistance and adhesion. • The magnesium addition causes a coating densification, lowest number of defects explaining the most capacitive results to coating 7% Mg-substituted fluoroapatite. The calcium substitution for magnesium on fluorapatite is attractive because this element is a natural substitute in biological apatites. There are several published stoichiometries for calcium substituted by magnesium fluorapatites and most works point out that the formation and fixation of biomimetic Ca-P coatings in Ringer's solution were strongly related to Mg2+ content and furthermore the Mg replacement improves the bioactivity of apatite. In the present study, fluorapatite (FA) and fluorapatite substituted with 6% and 7% of magnesium were obtained by deposition via sol-gel coating on substrates of AISI 316L stainless steel to investigate the effect of magnesium substitution on fluorapatite with not yet investigated stoichiometry. Characterization of coating thickness, chemical composition and crystalline structure was performed using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The coating adhesion was evaluated using the pull-out test and the corrosion resistance was undertaken using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The electrochemical results showed improvement in the corrosion resistance of magnesium-fluorapatite compared to fluorapatite coated on AISI 316L stainless steel substrates. The improvement corrosion protection and adhesion performance indicate that such magnesium fluorapatites coatings are very interesting candidates as bioactive coatings for implants. [ABSTRACT FROM AUTHOR]
Copyright of Applied Surface Science is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 141774981
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Deposition and characterization of a sol-gel Mg-substituted fluorapatite coating with new stoichiometries.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Ferreira%2C+J%2EM%2E%22">Ferreira, J.M.</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<i> jmfj@ufb.br</i><br /><searchLink fieldCode="AR" term="%22Rajendran%2C+V%2E%22">Rajendran, V.</searchLink><relatesTo>3</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Simonelli%2C+G%2E%22">Simonelli, G.</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> gsimonelli@ufba.br</i><br /><searchLink fieldCode="AR" term="%22Silva%2C+A%2EC%2EM%2E%22">Silva, A.C.M.</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> acristinasilva@ufba.br</i><br /><searchLink fieldCode="AR" term="%22Santos%2C+L%2EC%2EL%2E%22">Santos, L.C.L.</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> lclsantos@ufba.br</i><br /><searchLink fieldCode="AR" term="%22Mattedi%2C+S%2E%22">Mattedi, S.</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Pontes%2C+L%2EA%2EM%2E%22">Pontes, L.A.M.</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> uolpontes@uol.com.br</i><br /><searchLink fieldCode="AR" term="%22Costa%2C+I%2E%22">Costa, I.</searchLink><relatesTo>4</relatesTo> (AUTHOR)<i> icosta@ipen.br</i><br /><searchLink fieldCode="AR" term="%22Rossi%2C+J%2EL%2E%22">Rossi, J.L.</searchLink><relatesTo>4</relatesTo> (AUTHOR)<i> jelrossi@ipen.br</i><br /><searchLink fieldCode="AR" term="%22Baker%2C+M%2EA%2E%22">Baker, M.A.</searchLink><relatesTo>3</relatesTo> (AUTHOR)<i> m.baker@surrey.ac.uk</i>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Applied+Surface+Science%22">Applied Surface Science</searchLink>. Mar2020, Vol. 505, pN.PAG-N.PAG. 1p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Stoichiometry%22">Stoichiometry</searchLink><br /><searchLink fieldCode="DE" term="%22Electrophoretic+deposition%22">Electrophoretic deposition</searchLink><br /><searchLink fieldCode="DE" term="%22Electrolytic+corrosion%22">Electrolytic corrosion</searchLink><br /><searchLink fieldCode="DE" term="%22X-ray+photoelectron+spectroscopy%22">X-ray photoelectron spectroscopy</searchLink><br /><searchLink fieldCode="DE" term="%22Fluorapatite%22">Fluorapatite</searchLink><br /><searchLink fieldCode="DE" term="%22Surface+coatings%22">Surface coatings</searchLink><br /><searchLink fieldCode="DE" term="%22Physiologic+salines%22">Physiologic salines</searchLink><br /><searchLink fieldCode="DE" term="%22Scanning+electron+microscopy%22">Scanning electron microscopy</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: • The sol-gel fluorapatite and Mg-substituted (6% and 7% of Mg) fluorapatite coatings on stainless steel were obtained. • After 100 h exposed to simulated body solution Mg-substituted fluorapatite coating with 7% of magnesium presents highest corrosion resistance and adhesion. • The magnesium addition causes a coating densification, lowest number of defects explaining the most capacitive results to coating 7% Mg-substituted fluoroapatite. The calcium substitution for magnesium on fluorapatite is attractive because this element is a natural substitute in biological apatites. There are several published stoichiometries for calcium substituted by magnesium fluorapatites and most works point out that the formation and fixation of biomimetic Ca-P coatings in Ringer's solution were strongly related to Mg2+ content and furthermore the Mg replacement improves the bioactivity of apatite. In the present study, fluorapatite (FA) and fluorapatite substituted with 6% and 7% of magnesium were obtained by deposition via sol-gel coating on substrates of AISI 316L stainless steel to investigate the effect of magnesium substitution on fluorapatite with not yet investigated stoichiometry. Characterization of coating thickness, chemical composition and crystalline structure was performed using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The coating adhesion was evaluated using the pull-out test and the corrosion resistance was undertaken using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The electrochemical results showed improvement in the corrosion resistance of magnesium-fluorapatite compared to fluorapatite coated on AISI 316L stainless steel substrates. The improvement corrosion protection and adhesion performance indicate that such magnesium fluorapatites coatings are very interesting candidates as bioactive coatings for implants. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Applied Surface Science is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=141774981
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1016/j.apsusc.2019.144393
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 1
        StartPage: N.PAG
    Subjects:
      – SubjectFull: Stoichiometry
        Type: general
      – SubjectFull: Electrophoretic deposition
        Type: general
      – SubjectFull: Electrolytic corrosion
        Type: general
      – SubjectFull: X-ray photoelectron spectroscopy
        Type: general
      – SubjectFull: Fluorapatite
        Type: general
      – SubjectFull: Surface coatings
        Type: general
      – SubjectFull: Physiologic salines
        Type: general
      – SubjectFull: Scanning electron microscopy
        Type: general
    Titles:
      – TitleFull: Deposition and characterization of a sol-gel Mg-substituted fluorapatite coating with new stoichiometries.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Ferreira, J.M.
      – PersonEntity:
          Name:
            NameFull: Rajendran, V.
      – PersonEntity:
          Name:
            NameFull: Simonelli, G.
      – PersonEntity:
          Name:
            NameFull: Silva, A.C.M.
      – PersonEntity:
          Name:
            NameFull: Santos, L.C.L.
      – PersonEntity:
          Name:
            NameFull: Mattedi, S.
      – PersonEntity:
          Name:
            NameFull: Pontes, L.A.M.
      – PersonEntity:
          Name:
            NameFull: Costa, I.
      – PersonEntity:
          Name:
            NameFull: Rossi, J.L.
      – PersonEntity:
          Name:
            NameFull: Baker, M.A.
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 03
              Text: Mar2020
              Type: published
              Y: 2020
          Identifiers:
            – Type: issn-print
              Value: 01694332
          Numbering:
            – Type: volume
              Value: 505
          Titles:
            – TitleFull: Applied Surface Science
              Type: main
ResultId 1