View in EDS

Diamond composites with Al-Co binder: Synthesis, structure, wear resistance.

Saved in:
Bibliographic Details
Title: Diamond composites with Al-Co binder: Synthesis, structure, wear resistance.
Authors: Tkatchenko, V.V.1 (AUTHOR), Filonenko, V.P.1,2 (AUTHOR), Bagramov, R.Kh.2 (AUTHOR), Zibrov, I.P.2 (AUTHOR), Anokhin, A.S.3 (AUTHOR), Bondar, I.V.3 (AUTHOR), Andrianov, M.A.1 (AUTHOR), Shipkov, A.N.3 (AUTHOR)
Source: Materials Letters. Jan2023, Vol. 330, pN.PAG-N.PAG. 1p.
Subjects: Wear resistance, Aluminum powder, Intermetallic compounds, Diamonds, Tungsten carbide, Bits (Drilling & boring), Powders
Abstract: • Composites are obtained by sintering of diamond powders with Co and Al at high pressures. • Diamond carcass and AlCo-AlCo 3 C binder provides a very high resistance. • Turninig of WC-Co hard alloy in a quasi-ductile mode is possible with this composites. Wear-resistant diamond composites without a tungsten carbide substrate were obtained by sintering mixtures of micron and submicron diamonds at 7–8 GPa, 1550–1700 °C. Cobalt and aluminum powders were used as sintering activators in a proportion that ensures the formation of microstructure with binding phases in the form of intermetallic AlCo and carbide AlCo 3 C. The influence of the morphology and sizes of diamond particles on the microstructure and performance characteristics of composites is considered. The possibility of hard alloy turning with new composites from homogeneous mixtures in the quasi-ductile mode is demonstrated. The wear resistance of experimental samples with optimized initial composition and shape of diamond particles significantly exceeds the characteristics of high-quality commercial composites used in drill bits. [ABSTRACT FROM AUTHOR]
Copyright of Materials Letters is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Description
Abstract:• Composites are obtained by sintering of diamond powders with Co and Al at high pressures. • Diamond carcass and AlCo-AlCo 3 C binder provides a very high resistance. • Turninig of WC-Co hard alloy in a quasi-ductile mode is possible with this composites. Wear-resistant diamond composites without a tungsten carbide substrate were obtained by sintering mixtures of micron and submicron diamonds at 7–8 GPa, 1550–1700 °C. Cobalt and aluminum powders were used as sintering activators in a proportion that ensures the formation of microstructure with binding phases in the form of intermetallic AlCo and carbide AlCo 3 C. The influence of the morphology and sizes of diamond particles on the microstructure and performance characteristics of composites is considered. The possibility of hard alloy turning with new composites from homogeneous mixtures in the quasi-ductile mode is demonstrated. The wear resistance of experimental samples with optimized initial composition and shape of diamond particles significantly exceeds the characteristics of high-quality commercial composites used in drill bits. [ABSTRACT FROM AUTHOR]
ISSN:0167577X
DOI:10.1016/j.matlet.2022.133317