Determinación del diámetro económico de una tubería de impulsión de polietileno de alta densidad (PEAD).
Saved in:
| Title: | Determinación del diámetro económico de una tubería de impulsión de polietileno de alta densidad (PEAD). |
|---|---|
| Alternate Title: | Determination of the optimum diameter of a high density polyethylene (HDPE) impulse pipe. |
| Authors: | Martínez Valdés, Yaset1 yaset@civil.cujae.edu.cu, Riaño Valle, Félix1 riano@tesla.cujae.edu.cu, Acosta Caballero, Liz1 lizacostacaballero@gmail.com |
| Source: | Ingenieria Hidraulica y Ambiental. Oct-Dec2022, Vol. 43 Issue 4, p47-61. 15p. |
| Subjects: | Diameter, High density polyethylene, Pipe, Methodology, Water supply |
| Abstract (English): | A methodology is presented to obtain the economic diameter of a high-density polyethylene (HDPE) force main pipe from a pumped source system for water supply. As a starting point, it takes the concept of Optimum System Efficiency Range (OSER), together with new concepts, criteria and approaches that complement each other to obtain the economic diameter of a conductor. The proposed procedure incorporates in this analysis, the determination of the nominal pressure (PN) for each section of the conductor profile and its internal diameters depending on the particularities of the pipeline layout, incorporating other variables that depend on the type of installation and its design scheme. The procedure is illustrated with the solution of a practical problem. [ABSTRACT FROM AUTHOR] |
| Abstract (Spanish): | Se presenta una metodología para obtener el diámetro económico de una tubería de impulsión de polietileno de alta densidad (PEAD) de un sistema fuente por bombeo para suministro de agua. La misma toma como punto de partida el concepto de Rango de Eficiencia Óptima del Sistema (REOS), de conjunto con nuevos conceptos, criterios y enfoques que se complementan para la obtención del diámetro económico de una conductora. El procedimiento propuesto incorpora en este análisis, la determinación de la presión nominal (PN) para cada tramo del perfil de la conductora y sus diámetros interiores en función de las particularidades del trazado de la tubería, incorporando a otras variables que dependen del tipo de instalación y su esquema de diseño. El procedimiento se ilustra con la solución de un problema práctico. [ABSTRACT FROM AUTHOR] |
| Copyright of Ingenieria Hidraulica y Ambiental is the property of Facultad de Ingenieria Civil and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
| FullText | Links: – Type: pdflink Text: Availability: 0 |
|---|---|
| Header | DbId: egs DbLabel: Engineering Source An: 161736587 AccessLevel: 6 PubType: Academic Journal PubTypeId: academicJournal PreciseRelevancyScore: 0 |
| IllustrationInfo | |
| Items | – Name: Title Label: Title Group: Ti Data: Determinación del diámetro económico de una tubería de impulsión de polietileno de alta densidad (PEAD). – Name: TitleAlt Label: Alternate Title Group: TiAlt Data: Determination of the optimum diameter of a high density polyethylene (HDPE) impulse pipe. – Name: Author Label: Authors Group: Au Data: <searchLink fieldCode="AR" term="%22Martínez+Valdés%2C+Yaset%22">Martínez Valdés, Yaset</searchLink><relatesTo>1</relatesTo><i> yaset@civil.cujae.edu.cu</i><br /><searchLink fieldCode="AR" term="%22Riaño+Valle%2C+Félix%22">Riaño Valle, Félix</searchLink><relatesTo>1</relatesTo><i> riano@tesla.cujae.edu.cu</i><br /><searchLink fieldCode="AR" term="%22Acosta+Caballero%2C+Liz%22">Acosta Caballero, Liz</searchLink><relatesTo>1</relatesTo><i> lizacostacaballero@gmail.com</i> – Name: TitleSource Label: Source Group: Src Data: <searchLink fieldCode="JN" term="%22Ingenieria+Hidraulica+y+Ambiental%22">Ingenieria Hidraulica y Ambiental</searchLink>. Oct-Dec2022, Vol. 43 Issue 4, p47-61. 15p. – Name: Subject Label: Subjects Group: Su Data: <searchLink fieldCode="DE" term="%22Diameter%22">Diameter</searchLink><br /><searchLink fieldCode="DE" term="%22High+density+polyethylene%22">High density polyethylene</searchLink><br /><searchLink fieldCode="DE" term="%22Pipe%22">Pipe</searchLink><br /><searchLink fieldCode="DE" term="%22Methodology%22">Methodology</searchLink><br /><searchLink fieldCode="DE" term="%22Water+supply%22">Water supply</searchLink> – Name: Abstract Label: Abstract (English) Group: Ab Data: A methodology is presented to obtain the economic diameter of a high-density polyethylene (HDPE) force main pipe from a pumped source system for water supply. As a starting point, it takes the concept of Optimum System Efficiency Range (OSER), together with new concepts, criteria and approaches that complement each other to obtain the economic diameter of a conductor. The proposed procedure incorporates in this analysis, the determination of the nominal pressure (PN) for each section of the conductor profile and its internal diameters depending on the particularities of the pipeline layout, incorporating other variables that depend on the type of installation and its design scheme. The procedure is illustrated with the solution of a practical problem. [ABSTRACT FROM AUTHOR] – Name: Abstract Label: Abstract (Spanish) Group: Ab Data: Se presenta una metodología para obtener el diámetro económico de una tubería de impulsión de polietileno de alta densidad (PEAD) de un sistema fuente por bombeo para suministro de agua. La misma toma como punto de partida el concepto de Rango de Eficiencia Óptima del Sistema (REOS), de conjunto con nuevos conceptos, criterios y enfoques que se complementan para la obtención del diámetro económico de una conductora. El procedimiento propuesto incorpora en este análisis, la determinación de la presión nominal (PN) para cada tramo del perfil de la conductora y sus diámetros interiores en función de las particularidades del trazado de la tubería, incorporando a otras variables que dependen del tipo de instalación y su esquema de diseño. El procedimiento se ilustra con la solución de un problema práctico. [ABSTRACT FROM AUTHOR] – Name: AbstractSuppliedCopyright Label: Group: Ab Data: <i>Copyright of Ingenieria Hidraulica y Ambiental is the property of Facultad de Ingenieria Civil and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.) |
| PLink | https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=161736587 |
| RecordInfo | BibRecord: BibEntity: Languages: – Code: spa Text: Spanish PhysicalDescription: Pagination: PageCount: 15 StartPage: 47 Subjects: – SubjectFull: Diameter Type: general – SubjectFull: High density polyethylene Type: general – SubjectFull: Pipe Type: general – SubjectFull: Methodology Type: general – SubjectFull: Water supply Type: general Titles: – TitleFull: Determinación del diámetro económico de una tubería de impulsión de polietileno de alta densidad (PEAD). Type: main BibRelationships: HasContributorRelationships: – PersonEntity: Name: NameFull: Martínez Valdés, Yaset – PersonEntity: Name: NameFull: Riaño Valle, Félix – PersonEntity: Name: NameFull: Acosta Caballero, Liz IsPartOfRelationships: – BibEntity: Dates: – D: 01 M: 10 Text: Oct-Dec2022 Type: published Y: 2022 Identifiers: – Type: issn-print Value: 16800338 Numbering: – Type: volume Value: 43 – Type: issue Value: 4 Titles: – TitleFull: Ingenieria Hidraulica y Ambiental Type: main |
| ResultId | 1 |
