View in EDS

Analysis of open-hole-tension plates made of short fibre thermoplastic and reinforced with continuous fibre tailored inserts.

Saved in:
Bibliographic Details
Title: Analysis of open-hole-tension plates made of short fibre thermoplastic and reinforced with continuous fibre tailored inserts.
Authors: Arnaut, Katharina1 (AUTHOR) arnaut@faserinstitut.de, Dimassi, M Adli1 (AUTHOR), Romahn, Bernd2 (AUTHOR), Atilla, Ufuk2 (AUTHOR), Herrmann, Axel S1 (AUTHOR)
Source: Journal of Thermoplastic Composite Materials. Mar2023, Vol. 36 Issue 3, p1285-1305. 21p.
Subjects: Glass fibers, Injection wells, Injection molding, Tensile tests
Abstract: In the present paper, the influence of tailored load introduction inserts applied to a bolt-loaded open-hole injection plate with different short glass fibre content is investigated. The tailored load introduction inserts made with a Tailored Fibre Placement (TFP) process, as well as open-hole injection plates without an insert were considered as reference samples. The samples were tested under tensile bolt-loading. The influence of the TFP-inserts on the load bearing properties of the open-hole injection plates was investigated. The test results show a huge increase of the load-carrying ability of the short-glass-fibre specimens when TFP-inserts are integrated. Moreover, the damage tolerance was dramatically improved as the specimens with integrated TFP-inserts did not fail abruptly and a residual strength higher than the strength of the test specimen without insert could be observed. However, the strength of the test specimen with integrated insert did not exceed the strength of the insert itself in most cases. [ABSTRACT FROM AUTHOR]
Copyright of Journal of Thermoplastic Composite Materials is the property of Sage Publications Inc. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 161971191
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Analysis of open-hole-tension plates made of short fibre thermoplastic and reinforced with continuous fibre tailored inserts.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Arnaut%2C+Katharina%22">Arnaut, Katharina</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> arnaut@faserinstitut.de</i><br /><searchLink fieldCode="AR" term="%22Dimassi%2C+M+Adli%22">Dimassi, M Adli</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Romahn%2C+Bernd%22">Romahn, Bernd</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Atilla%2C+Ufuk%22">Atilla, Ufuk</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Herrmann%2C+Axel+S%22">Herrmann, Axel S</searchLink><relatesTo>1</relatesTo> (AUTHOR)
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Journal+of+Thermoplastic+Composite+Materials%22">Journal of Thermoplastic Composite Materials</searchLink>. Mar2023, Vol. 36 Issue 3, p1285-1305. 21p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Glass+fibers%22">Glass fibers</searchLink><br /><searchLink fieldCode="DE" term="%22Injection+wells%22">Injection wells</searchLink><br /><searchLink fieldCode="DE" term="%22Injection+molding%22">Injection molding</searchLink><br /><searchLink fieldCode="DE" term="%22Tensile+tests%22">Tensile tests</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: In the present paper, the influence of tailored load introduction inserts applied to a bolt-loaded open-hole injection plate with different short glass fibre content is investigated. The tailored load introduction inserts made with a Tailored Fibre Placement (TFP) process, as well as open-hole injection plates without an insert were considered as reference samples. The samples were tested under tensile bolt-loading. The influence of the TFP-inserts on the load bearing properties of the open-hole injection plates was investigated. The test results show a huge increase of the load-carrying ability of the short-glass-fibre specimens when TFP-inserts are integrated. Moreover, the damage tolerance was dramatically improved as the specimens with integrated TFP-inserts did not fail abruptly and a residual strength higher than the strength of the test specimen without insert could be observed. However, the strength of the test specimen with integrated insert did not exceed the strength of the insert itself in most cases. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Journal of Thermoplastic Composite Materials is the property of Sage Publications Inc. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=161971191
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1177/0892705720963539
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 21
        StartPage: 1285
    Subjects:
      – SubjectFull: Glass fibers
        Type: general
      – SubjectFull: Injection wells
        Type: general
      – SubjectFull: Injection molding
        Type: general
      – SubjectFull: Tensile tests
        Type: general
    Titles:
      – TitleFull: Analysis of open-hole-tension plates made of short fibre thermoplastic and reinforced with continuous fibre tailored inserts.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Arnaut, Katharina
      – PersonEntity:
          Name:
            NameFull: Dimassi, M Adli
      – PersonEntity:
          Name:
            NameFull: Romahn, Bernd
      – PersonEntity:
          Name:
            NameFull: Atilla, Ufuk
      – PersonEntity:
          Name:
            NameFull: Herrmann, Axel S
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 03
              Text: Mar2023
              Type: published
              Y: 2023
          Identifiers:
            – Type: issn-print
              Value: 08927057
          Numbering:
            – Type: volume
              Value: 36
            – Type: issue
              Value: 3
          Titles:
            – TitleFull: Journal of Thermoplastic Composite Materials
              Type: main
ResultId 1