View in EDS

Whole-body vibration transmitted to the framesaw operator

Saved in:
Bibliographic Details
Title: Whole-body vibration transmitted to the framesaw operator
Authors: Goglia, V. goglia@sumfak.hr, Grbac, I.1
Source: Applied Ergonomics. Jan2005, Vol. 36 Issue 1, p43-48. 6p.
Subjects: Gang saws, Carpentry tools, Spine diseases, Hardware
Abstract: Abstract: At the moment there are more than 40 framesaws in use in Croatia, and many framesaw operators have a serious spine problem. Complex measurements have been carried out in order to determine the vibration level on the operator''s seat. This paper reports and analyzes the measurement results of the whole-body vibration transmitted to a framesaw operator during an ordinary working day. Vibrations were measured at all operations performed during the normal framesaw working cycle. For all the measurements frequency spectra were obtained and the results graphically represented according to the ISO 2631-1-1986 recommendations. The weighted r.m.s. acceleration was also calculated and the duration of each single framesaw operation was measured. The energy-equivalent vibration level, corresponding to the total duration of exposure was calculated, too. The values so obtained were compared with the daily exposure limits according to the ISO 2631-1-1997. The measurement results showed that the framesaw operator, under the given measuring conditions, is exposed to a higher vibration level than the given daily exposure limits. Also, the energy-equivalent vibration level calculated according to the guidelines given in the new ISO 2631-1-1997 is higher than the limits recommended for an effective 4-h daily exposure. [Copyright &y& Elsevier]
Copyright of Applied Ergonomics is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 17228383
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Whole-body vibration transmitted to the framesaw operator
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Goglia%2C+V%2E%22">Goglia, V.</searchLink><i> goglia@sumfak.hr</i><br /><searchLink fieldCode="AR" term="%22Grbac%2C+I%2E%22">Grbac, I.</searchLink><relatesTo>1</relatesTo>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Applied+Ergonomics%22">Applied Ergonomics</searchLink>. Jan2005, Vol. 36 Issue 1, p43-48. 6p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Gang+saws%22">Gang saws</searchLink><br /><searchLink fieldCode="DE" term="%22Carpentry+tools%22">Carpentry tools</searchLink><br /><searchLink fieldCode="DE" term="%22Spine+diseases%22">Spine diseases</searchLink><br /><searchLink fieldCode="DE" term="%22Hardware%22">Hardware</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: Abstract: At the moment there are more than 40 framesaws in use in Croatia, and many framesaw operators have a serious spine problem. Complex measurements have been carried out in order to determine the vibration level on the operator''s seat. This paper reports and analyzes the measurement results of the whole-body vibration transmitted to a framesaw operator during an ordinary working day. Vibrations were measured at all operations performed during the normal framesaw working cycle. For all the measurements frequency spectra were obtained and the results graphically represented according to the ISO 2631-1-1986 recommendations. The weighted r.m.s. acceleration was also calculated and the duration of each single framesaw operation was measured. The energy-equivalent vibration level, corresponding to the total duration of exposure was calculated, too. The values so obtained were compared with the daily exposure limits according to the ISO 2631-1-1997. The measurement results showed that the framesaw operator, under the given measuring conditions, is exposed to a higher vibration level than the given daily exposure limits. Also, the energy-equivalent vibration level calculated according to the guidelines given in the new ISO 2631-1-1997 is higher than the limits recommended for an effective 4-h daily exposure. [Copyright &y& Elsevier]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Applied Ergonomics is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=17228383
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1016/j.apergo.2004.09.005
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 6
        StartPage: 43
    Subjects:
      – SubjectFull: Gang saws
        Type: general
      – SubjectFull: Carpentry tools
        Type: general
      – SubjectFull: Spine diseases
        Type: general
      – SubjectFull: Hardware
        Type: general
    Titles:
      – TitleFull: Whole-body vibration transmitted to the framesaw operator
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Goglia, V.
      – PersonEntity:
          Name:
            NameFull: Grbac, I.
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 01
              Text: Jan2005
              Type: published
              Y: 2005
          Identifiers:
            – Type: issn-print
              Value: 00036870
          Numbering:
            – Type: volume
              Value: 36
            – Type: issue
              Value: 1
          Titles:
            – TitleFull: Applied Ergonomics
              Type: main
ResultId 1