View in EDS

Investigation of Mold Filling Simulation, Segregation, and Rheological Properties in Low Pressure Injection Molding of Alumina Parts.

Saved in:
Bibliographic Details
Title: Investigation of Mold Filling Simulation, Segregation, and Rheological Properties in Low Pressure Injection Molding of Alumina Parts.
Authors: Yavari, Rezvan1 (AUTHOR), Alizadeh, Masoud2 (AUTHOR) m-alizadeh@merc.ac.ir
Source: Journal of Materials Engineering & Performance. Aug2024, Vol. 33 Issue 16, p8311-8321. 11p.
Subjects: Powder injection molding, Rheology, Temperature distribution, Ceramics, Aluminum oxide
Abstract: Advanced ceramics are widely used in various industries like medical, automotive, and aerospace. Production of ceramic components has been constrained due to challenging machining procedures and the difficulty of forming complicated parts. Powder injection molding is one of the suitable methods to produce complex ceramics and overcome the difficulties of producing these parts. This paper investigates the effect of micro and nano powder addition on the rheological properties, segregation, and imbalance filling. For this purpose, different amounts of nano and micro SiC powder (5 wt%, 10 wt%, 15 wt%, and 20 wt% of micro SiC and 1-3 wt% of nano alumina) were added to alumina powder and the prepared feedstocks were injected at various flow rates. Rheological properties of feedstocks and segregation phenomenon in the green parts were investigated by rotational rheometer and thermogravimetric analyzer, respectively. As well as, mold filing, segregation and distribution of temperature during filling were simulated using Moldflow Synergy (Autodesk) 2019 software and compared to the experimental results. It was found that feedstocks containing 15 wt% micro SiC and 2 wt% nano SiC showed the best rheological behavior. The segregation phenomenon was observed in samples injected at flow rate of 15 cm3/s. No imbalance filling was observed in none of the samples, but by increasing the flow rate the segregation was intensified. [ABSTRACT FROM AUTHOR]
Copyright of Journal of Materials Engineering & Performance is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 179414587
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Investigation of Mold Filling Simulation, Segregation, and Rheological Properties in Low Pressure Injection Molding of Alumina Parts.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Yavari%2C+Rezvan%22">Yavari, Rezvan</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Alizadeh%2C+Masoud%22">Alizadeh, Masoud</searchLink><relatesTo>2</relatesTo> (AUTHOR)<i> m-alizadeh@merc.ac.ir</i>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Journal+of+Materials+Engineering+%26+Performance%22">Journal of Materials Engineering & Performance</searchLink>. Aug2024, Vol. 33 Issue 16, p8311-8321. 11p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Powder+injection+molding%22">Powder injection molding</searchLink><br /><searchLink fieldCode="DE" term="%22Rheology%22">Rheology</searchLink><br /><searchLink fieldCode="DE" term="%22Temperature+distribution%22">Temperature distribution</searchLink><br /><searchLink fieldCode="DE" term="%22Ceramics%22">Ceramics</searchLink><br /><searchLink fieldCode="DE" term="%22Aluminum+oxide%22">Aluminum oxide</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: Advanced ceramics are widely used in various industries like medical, automotive, and aerospace. Production of ceramic components has been constrained due to challenging machining procedures and the difficulty of forming complicated parts. Powder injection molding is one of the suitable methods to produce complex ceramics and overcome the difficulties of producing these parts. This paper investigates the effect of micro and nano powder addition on the rheological properties, segregation, and imbalance filling. For this purpose, different amounts of nano and micro SiC powder (5 wt%, 10 wt%, 15 wt%, and 20 wt% of micro SiC and 1-3 wt% of nano alumina) were added to alumina powder and the prepared feedstocks were injected at various flow rates. Rheological properties of feedstocks and segregation phenomenon in the green parts were investigated by rotational rheometer and thermogravimetric analyzer, respectively. As well as, mold filing, segregation and distribution of temperature during filling were simulated using Moldflow Synergy (Autodesk) 2019 software and compared to the experimental results. It was found that feedstocks containing 15 wt% micro SiC and 2 wt% nano SiC showed the best rheological behavior. The segregation phenomenon was observed in samples injected at flow rate of 15 cm3/s. No imbalance filling was observed in none of the samples, but by increasing the flow rate the segregation was intensified. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Journal of Materials Engineering & Performance is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=179414587
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1007/s11665-023-08500-5
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 11
        StartPage: 8311
    Subjects:
      – SubjectFull: Powder injection molding
        Type: general
      – SubjectFull: Rheology
        Type: general
      – SubjectFull: Temperature distribution
        Type: general
      – SubjectFull: Ceramics
        Type: general
      – SubjectFull: Aluminum oxide
        Type: general
    Titles:
      – TitleFull: Investigation of Mold Filling Simulation, Segregation, and Rheological Properties in Low Pressure Injection Molding of Alumina Parts.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Yavari, Rezvan
      – PersonEntity:
          Name:
            NameFull: Alizadeh, Masoud
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 15
              M: 08
              Text: Aug2024
              Type: published
              Y: 2024
          Identifiers:
            – Type: issn-print
              Value: 10599495
          Numbering:
            – Type: volume
              Value: 33
            – Type: issue
              Value: 16
          Titles:
            – TitleFull: Journal of Materials Engineering & Performance
              Type: main
ResultId 1