View in EDS

Effect of Ni aids on the unlubricated tribological behaviour of WC cemented carbides fabricated by pressureless infiltration of Cu alloy binder.

Saved in:
Bibliographic Details
Title: Effect of Ni aids on the unlubricated tribological behaviour of WC cemented carbides fabricated by pressureless infiltration of Cu alloy binder.
Authors: Mameri, Ali1 (AUTHOR), Daoud, Ismail2 (AUTHOR), Rezzoug, Amine3 (AUTHOR), Boukantar, Aniss-Rabah2 (AUTHOR), Miroud, Djamel2 (AUTHOR), Yamanoglu, Ridvan4 (AUTHOR), Ortiz, Angel L.1,5 (AUTHOR) alortiz@unex.es
Source: Ceramics International. Jan2025, Vol. 51 Issue 3, p3115-3125. 11p.
Subjects: Aluminum oxide, Copper, Wear resistance, Mechanical wear, Carbides, Sliding wear, Cohesion
Abstract: The unlubricated sliding-wear behaviour of WC cemented carbides fabricated by pressureless infiltration of the Cu–30Mn–1P alloy without and with Ni infiltration aids (in the range of 3–10 wt%) was investigated. Firstly, detailed microstructural characterisation showed that these cemented carbides are all dense and consist of extra coarse WC grains (∼62 μm) embedded into Cu 0.96 Mn 0.04 (with traces of P), plus secondary Mn 2 P and Mn 3 P phases segregated at the grain/binder interfaces. When infiltrated with Ni aids, the binder contains Ni solutes and there is also interfacial segregation of NiP 2 and Mn 3 Ni 20 P 6. Secondly, the mechanical characterisation showed that the Ni infiltration aids resulted in stronger and more ductile cemented carbides, with no reduction in hardness below 5 wt% Ni aids. Specifically, it was found that 3 wt% Ni infiltration is optimal, which maximises the strength, ductility, and toughness of these cemented carbides as a consequence of the optimised cohesion of the WC grains in the metal binder. And thirdly, the tribological characterisation against Al 2 O 3 showed that all these cemented carbides are wear-resistant, with specific wear rates increasing with applied load, but in the order of 10−5 mm3/(N·m) or lower. Importantly, it was found that Ni infiltration aids up to 5 wt% are beneficial to the wear resistance of these cemented carbides, but more becomes increasingly detrimental. As for the other mechanical properties, Ni infiltration at 3 wt% also maximised the wear resistance. Detailed microstructural characterisation of the worn surfaces of the cemented carbides revealed that wear took place first by two-body abrasion, in which a tribolayer is formed, and then by three-body abrasion, in which partial removal and formation of the tribolayer occur dynamically over time, with the severity of the abrasions depending on the proportion of Ni infiltration aids and the applied load. [ABSTRACT FROM AUTHOR]
Copyright of Ceramics International is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 182394429
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Effect of Ni aids on the unlubricated tribological behaviour of WC cemented carbides fabricated by pressureless infiltration of Cu alloy binder.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Mameri%2C+Ali%22">Mameri, Ali</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Daoud%2C+Ismail%22">Daoud, Ismail</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Rezzoug%2C+Amine%22">Rezzoug, Amine</searchLink><relatesTo>3</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Boukantar%2C+Aniss-Rabah%22">Boukantar, Aniss-Rabah</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Miroud%2C+Djamel%22">Miroud, Djamel</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Yamanoglu%2C+Ridvan%22">Yamanoglu, Ridvan</searchLink><relatesTo>4</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Ortiz%2C+Angel+L%2E%22">Ortiz, Angel L.</searchLink><relatesTo>1,5</relatesTo> (AUTHOR)<i> alortiz@unex.es</i>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Ceramics+International%22">Ceramics International</searchLink>. Jan2025, Vol. 51 Issue 3, p3115-3125. 11p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Aluminum+oxide%22">Aluminum oxide</searchLink><br /><searchLink fieldCode="DE" term="%22Copper%22">Copper</searchLink><br /><searchLink fieldCode="DE" term="%22Wear+resistance%22">Wear resistance</searchLink><br /><searchLink fieldCode="DE" term="%22Mechanical+wear%22">Mechanical wear</searchLink><br /><searchLink fieldCode="DE" term="%22Carbides%22">Carbides</searchLink><br /><searchLink fieldCode="DE" term="%22Sliding+wear%22">Sliding wear</searchLink><br /><searchLink fieldCode="DE" term="%22Cohesion%22">Cohesion</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: The unlubricated sliding-wear behaviour of WC cemented carbides fabricated by pressureless infiltration of the Cu–30Mn–1P alloy without and with Ni infiltration aids (in the range of 3–10 wt%) was investigated. Firstly, detailed microstructural characterisation showed that these cemented carbides are all dense and consist of extra coarse WC grains (∼62 μm) embedded into Cu 0.96 Mn 0.04 (with traces of P), plus secondary Mn 2 P and Mn 3 P phases segregated at the grain/binder interfaces. When infiltrated with Ni aids, the binder contains Ni solutes and there is also interfacial segregation of NiP 2 and Mn 3 Ni 20 P 6. Secondly, the mechanical characterisation showed that the Ni infiltration aids resulted in stronger and more ductile cemented carbides, with no reduction in hardness below 5 wt% Ni aids. Specifically, it was found that 3 wt% Ni infiltration is optimal, which maximises the strength, ductility, and toughness of these cemented carbides as a consequence of the optimised cohesion of the WC grains in the metal binder. And thirdly, the tribological characterisation against Al 2 O 3 showed that all these cemented carbides are wear-resistant, with specific wear rates increasing with applied load, but in the order of 10−5 mm3/(N·m) or lower. Importantly, it was found that Ni infiltration aids up to 5 wt% are beneficial to the wear resistance of these cemented carbides, but more becomes increasingly detrimental. As for the other mechanical properties, Ni infiltration at 3 wt% also maximised the wear resistance. Detailed microstructural characterisation of the worn surfaces of the cemented carbides revealed that wear took place first by two-body abrasion, in which a tribolayer is formed, and then by three-body abrasion, in which partial removal and formation of the tribolayer occur dynamically over time, with the severity of the abrasions depending on the proportion of Ni infiltration aids and the applied load. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Ceramics International is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=182394429
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1016/j.ceramint.2024.11.287
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 11
        StartPage: 3115
    Subjects:
      – SubjectFull: Aluminum oxide
        Type: general
      – SubjectFull: Copper
        Type: general
      – SubjectFull: Wear resistance
        Type: general
      – SubjectFull: Mechanical wear
        Type: general
      – SubjectFull: Carbides
        Type: general
      – SubjectFull: Sliding wear
        Type: general
      – SubjectFull: Cohesion
        Type: general
    Titles:
      – TitleFull: Effect of Ni aids on the unlubricated tribological behaviour of WC cemented carbides fabricated by pressureless infiltration of Cu alloy binder.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Mameri, Ali
      – PersonEntity:
          Name:
            NameFull: Daoud, Ismail
      – PersonEntity:
          Name:
            NameFull: Rezzoug, Amine
      – PersonEntity:
          Name:
            NameFull: Boukantar, Aniss-Rabah
      – PersonEntity:
          Name:
            NameFull: Miroud, Djamel
      – PersonEntity:
          Name:
            NameFull: Yamanoglu, Ridvan
      – PersonEntity:
          Name:
            NameFull: Ortiz, Angel L.
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 20
              M: 01
              Text: Jan2025
              Type: published
              Y: 2025
          Identifiers:
            – Type: issn-print
              Value: 02728842
          Numbering:
            – Type: volume
              Value: 51
            – Type: issue
              Value: 3
          Titles:
            – TitleFull: Ceramics International
              Type: main
ResultId 1