View in EDS HTML Full Text PDF Full Text

Identification of Dynamic Recrystallization Model Parameters for 40CrMnMoA Alloy Steel Using the Inverse Optimization Method.

Saved in:
Bibliographic Details
Title: Identification of Dynamic Recrystallization Model Parameters for 40CrMnMoA Alloy Steel Using the Inverse Optimization Method.
Authors: Chen, Xuewen1 (AUTHOR) chenxwdavid@haust.edu.cn, Li, Qiang1 (AUTHOR), Liu, Bingqi1 (AUTHOR) 220320020227@stu.haust.edu.cn, Zhao, Shiqi1 (AUTHOR), Sun, Lei1 (AUTHOR), Yi, Hao1 (AUTHOR)
Source: Materials (1996-1944). Feb2025, Vol. 18 Issue 3, p718. 20p.
Subjects: Isothermal compression, Simulated annealing, Standard deviations, Isothermal processes, Strain rate
Abstract: The microstructure of 40CrMnMoA during hot forging determines its macroscopic mechanical properties. Dynamic recrystallization (DRX) behavior is commonly used to refine grains and improve the microstructure of materials; therefore, it is important to be able to predict mechanical behavior during hot forging and the microstructure evolution during dynamic recrystallization. In order to accurately determine the DRX model parameters of 40CrMnMoA steel, an inverse optimization method is proposed in this work. The uniaxial isothermal compression experiment of 40CrMnMoA steel was carried out on a Gleeble-1500D thermal simulation tester (Dynamic Systems Inc. (DSI), Poestenkill, NY, USA) under the temperature range of 900~1200 °C and the strain rate range of 0.005 to 5 s−1. Based on the true stress–strain data obtained by a compression test, the DRX model of 40CrMnMoA was initially established using the traditional averaging method. Subsequently, the DRX model parameters calculated by the conventional averaging method were used as the initial values, the mean-square error between the experimental and calculated values of the DRX volume fraction was set as the objective function, and the DRX model parameters were optimized by the adaptive simulated annealing (ASA) algorithm. By comparing the correlation coefficient R, average absolute relative error (AARE), and the root mean square error (RMSE) of the predicted DRX percentage with the experimental values before and after optimization, it was found that the optimized model achieved an R-value of 0.992, with AARE and RMSE decreased by 34% and 2%, respectively, which verified the accuracy of the optimized DRX model. Through the program's secondary development, the optimized DRX model of 40CrMnMoA was integrated into finite element software Forge® 3.2 to simulate the isothermal compression process. The comparison between grain size from the central region of simulation results and actual samples revealed that the relative error is less than 3%. This result demonstrated that the inverse optimization method can accurately identify the DRX model parameters of 40CrMnMoA alloy steel. [ABSTRACT FROM AUTHOR]
Copyright of Materials (1996-1944) is the property of MDPI and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Full text is not displayed to guests.
FullText Links:
  – Type: pdflink
Text:
  Availability: 1
Header DbId: egs
DbLabel: Engineering Source
An: 182986030
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Identification of Dynamic Recrystallization Model Parameters for 40CrMnMoA Alloy Steel Using the Inverse Optimization Method.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Chen%2C+Xuewen%22">Chen, Xuewen</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> chenxwdavid@haust.edu.cn</i><br /><searchLink fieldCode="AR" term="%22Li%2C+Qiang%22">Li, Qiang</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Liu%2C+Bingqi%22">Liu, Bingqi</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> 220320020227@stu.haust.edu.cn</i><br /><searchLink fieldCode="AR" term="%22Zhao%2C+Shiqi%22">Zhao, Shiqi</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Sun%2C+Lei%22">Sun, Lei</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Yi%2C+Hao%22">Yi, Hao</searchLink><relatesTo>1</relatesTo> (AUTHOR)
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Materials+%281996-1944%29%22">Materials (1996-1944)</searchLink>. Feb2025, Vol. 18 Issue 3, p718. 20p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Isothermal+compression%22">Isothermal compression</searchLink><br /><searchLink fieldCode="DE" term="%22Simulated+annealing%22">Simulated annealing</searchLink><br /><searchLink fieldCode="DE" term="%22Standard+deviations%22">Standard deviations</searchLink><br /><searchLink fieldCode="DE" term="%22Isothermal+processes%22">Isothermal processes</searchLink><br /><searchLink fieldCode="DE" term="%22Strain+rate%22">Strain rate</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: The microstructure of 40CrMnMoA during hot forging determines its macroscopic mechanical properties. Dynamic recrystallization (DRX) behavior is commonly used to refine grains and improve the microstructure of materials; therefore, it is important to be able to predict mechanical behavior during hot forging and the microstructure evolution during dynamic recrystallization. In order to accurately determine the DRX model parameters of 40CrMnMoA steel, an inverse optimization method is proposed in this work. The uniaxial isothermal compression experiment of 40CrMnMoA steel was carried out on a Gleeble-1500D thermal simulation tester (Dynamic Systems Inc. (DSI), Poestenkill, NY, USA) under the temperature range of 900~1200 °C and the strain rate range of 0.005 to 5 s−1. Based on the true stress–strain data obtained by a compression test, the DRX model of 40CrMnMoA was initially established using the traditional averaging method. Subsequently, the DRX model parameters calculated by the conventional averaging method were used as the initial values, the mean-square error between the experimental and calculated values of the DRX volume fraction was set as the objective function, and the DRX model parameters were optimized by the adaptive simulated annealing (ASA) algorithm. By comparing the correlation coefficient R, average absolute relative error (AARE), and the root mean square error (RMSE) of the predicted DRX percentage with the experimental values before and after optimization, it was found that the optimized model achieved an R-value of 0.992, with AARE and RMSE decreased by 34% and 2%, respectively, which verified the accuracy of the optimized DRX model. Through the program's secondary development, the optimized DRX model of 40CrMnMoA was integrated into finite element software Forge® 3.2 to simulate the isothermal compression process. The comparison between grain size from the central region of simulation results and actual samples revealed that the relative error is less than 3%. This result demonstrated that the inverse optimization method can accurately identify the DRX model parameters of 40CrMnMoA alloy steel. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Materials (1996-1944) is the property of MDPI and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=182986030
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.3390/ma18030718
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 20
        StartPage: 718
    Subjects:
      – SubjectFull: Isothermal compression
        Type: general
      – SubjectFull: Simulated annealing
        Type: general
      – SubjectFull: Standard deviations
        Type: general
      – SubjectFull: Isothermal processes
        Type: general
      – SubjectFull: Strain rate
        Type: general
    Titles:
      – TitleFull: Identification of Dynamic Recrystallization Model Parameters for 40CrMnMoA Alloy Steel Using the Inverse Optimization Method.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Chen, Xuewen
      – PersonEntity:
          Name:
            NameFull: Li, Qiang
      – PersonEntity:
          Name:
            NameFull: Liu, Bingqi
      – PersonEntity:
          Name:
            NameFull: Zhao, Shiqi
      – PersonEntity:
          Name:
            NameFull: Sun, Lei
      – PersonEntity:
          Name:
            NameFull: Yi, Hao
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 02
              Text: Feb2025
              Type: published
              Y: 2025
          Identifiers:
            – Type: issn-print
              Value: 19961944
          Numbering:
            – Type: volume
              Value: 18
            – Type: issue
              Value: 3
          Titles:
            – TitleFull: Materials (1996-1944)
              Type: main
ResultId 1