The Analysis of Plastic Forming in the Rolling Process of Difficult-to-Deform Ti + Ni Layered Composites.
Saved in:
| Title: | The Analysis of Plastic Forming in the Rolling Process of Difficult-to-Deform Ti + Ni Layered Composites. |
|---|---|
| Authors: | Rydz, Dariusz1 (AUTHOR) dariusz.rydz@pcz.pl, Mróz, Sebastian1,2 (AUTHOR), Szota, Piotr1 (AUTHOR), Stradomski, Grzegorz1,2 (AUTHOR), Garstka, Tomasz1 (AUTHOR), Dyl, Tomasz Cyryl2 (AUTHOR) |
| Source: | Materials (1996-1944). May2025, Vol. 18 Issue 9, p1926. 19p. |
| Subjects: | Explosive welding, Plastic analysis (Engineering), Rolling-mills, Residual stresses, Shear strength |
| Abstract: | The article presents the results of experimental studies on the symmetrical and asymmetrical rolling process of composite laminate sheets consisting of difficult-to-deform Ti and Ni materials. Composite sheets joined by explosive welding were used for the tests. The aim of the research was to determine the impact of plastic shaping conditions in the rolling process on the quality and selected functional properties of the materials constituting the layered composite. The rolling process was carried out cold on a duo laboratory rolling mill with a roll diameter of 300 mm. During the rolling process, the influence of the rolling process conditions on the distribution of metal pressure forces on the rolls was determined, as well as the shear strength and microstructural studies of the joint area of the layered composites. As part of the conducted considerations, residual stress tests were carried out using the Barkhausen noise method. The scientific aim of the presented work was to determine the optimal conditions for the plastic processing of multi-layer Ti-Ni sheets. The results presented in the work allowed for determining the most favorable conditions for the rolling process. [ABSTRACT FROM AUTHOR] |
| Copyright of Materials (1996-1944) is the property of MDPI and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| FullText | Links: – Type: pdflink Text: Availability: 1 |
|---|---|
| Header | DbId: egs DbLabel: Engineering Source An: 185131481 AccessLevel: 6 PubType: Academic Journal PubTypeId: academicJournal PreciseRelevancyScore: 0 |
| IllustrationInfo | |
| Items | – Name: Title Label: Title Group: Ti Data: The Analysis of Plastic Forming in the Rolling Process of Difficult-to-Deform Ti + Ni Layered Composites. – Name: Author Label: Authors Group: Au Data: <searchLink fieldCode="AR" term="%22Rydz%2C+Dariusz%22">Rydz, Dariusz</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> dariusz.rydz@pcz.pl</i><br /><searchLink fieldCode="AR" term="%22Mróz%2C+Sebastian%22">Mróz, Sebastian</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Szota%2C+Piotr%22">Szota, Piotr</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Stradomski%2C+Grzegorz%22">Stradomski, Grzegorz</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Garstka%2C+Tomasz%22">Garstka, Tomasz</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Dyl%2C+Tomasz+Cyryl%22">Dyl, Tomasz Cyryl</searchLink><relatesTo>2</relatesTo> (AUTHOR) – Name: TitleSource Label: Source Group: Src Data: <searchLink fieldCode="JN" term="%22Materials+%281996-1944%29%22">Materials (1996-1944)</searchLink>. May2025, Vol. 18 Issue 9, p1926. 19p. – Name: Subject Label: Subjects Group: Su Data: <searchLink fieldCode="DE" term="%22Explosive+welding%22">Explosive welding</searchLink><br /><searchLink fieldCode="DE" term="%22Plastic+analysis+%28Engineering%29%22">Plastic analysis (Engineering)</searchLink><br /><searchLink fieldCode="DE" term="%22Rolling-mills%22">Rolling-mills</searchLink><br /><searchLink fieldCode="DE" term="%22Residual+stresses%22">Residual stresses</searchLink><br /><searchLink fieldCode="DE" term="%22Shear+strength%22">Shear strength</searchLink> – Name: Abstract Label: Abstract Group: Ab Data: The article presents the results of experimental studies on the symmetrical and asymmetrical rolling process of composite laminate sheets consisting of difficult-to-deform Ti and Ni materials. Composite sheets joined by explosive welding were used for the tests. The aim of the research was to determine the impact of plastic shaping conditions in the rolling process on the quality and selected functional properties of the materials constituting the layered composite. The rolling process was carried out cold on a duo laboratory rolling mill with a roll diameter of 300 mm. During the rolling process, the influence of the rolling process conditions on the distribution of metal pressure forces on the rolls was determined, as well as the shear strength and microstructural studies of the joint area of the layered composites. As part of the conducted considerations, residual stress tests were carried out using the Barkhausen noise method. The scientific aim of the presented work was to determine the optimal conditions for the plastic processing of multi-layer Ti-Ni sheets. The results presented in the work allowed for determining the most favorable conditions for the rolling process. [ABSTRACT FROM AUTHOR] – Name: AbstractSuppliedCopyright Label: Group: Ab Data: <i>Copyright of Materials (1996-1944) is the property of MDPI and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.) |
| PLink | https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=185131481 |
| RecordInfo | BibRecord: BibEntity: Identifiers: – Type: doi Value: 10.3390/ma18091926 Languages: – Code: eng Text: English PhysicalDescription: Pagination: PageCount: 19 StartPage: 1926 Subjects: – SubjectFull: Explosive welding Type: general – SubjectFull: Plastic analysis (Engineering) Type: general – SubjectFull: Rolling-mills Type: general – SubjectFull: Residual stresses Type: general – SubjectFull: Shear strength Type: general Titles: – TitleFull: The Analysis of Plastic Forming in the Rolling Process of Difficult-to-Deform Ti + Ni Layered Composites. Type: main BibRelationships: HasContributorRelationships: – PersonEntity: Name: NameFull: Rydz, Dariusz – PersonEntity: Name: NameFull: Mróz, Sebastian – PersonEntity: Name: NameFull: Szota, Piotr – PersonEntity: Name: NameFull: Stradomski, Grzegorz – PersonEntity: Name: NameFull: Garstka, Tomasz – PersonEntity: Name: NameFull: Dyl, Tomasz Cyryl IsPartOfRelationships: – BibEntity: Dates: – D: 01 M: 05 Text: May2025 Type: published Y: 2025 Identifiers: – Type: issn-print Value: 19961944 Numbering: – Type: volume Value: 18 – Type: issue Value: 9 Titles: – TitleFull: Materials (1996-1944) Type: main |
| ResultId | 1 |
