View in EDS

Devitrification and fibration of silicate glass from basalt with olivine addition.

Saved in:
Bibliographic Details
Title: Devitrification and fibration of silicate glass from basalt with olivine addition.
Authors: Liu, Changjiang1,2 (AUTHOR) liucj2017@hgu.edu.cn, Wu, Hongwei1 (AUTHOR), Zhang, Hankun1 (AUTHOR), Shi, Qing3 (AUTHOR), Li, Hongchao1,2 (AUTHOR), Kang, Qian1,2 (AUTHOR), Tao, Longfeng1,2 (AUTHOR)
Source: Ceramics International. Jun2025, Vol. 51 Issue 15, p21048-21054. 7p.
Subjects: Devitrification, High temperatures, Basalt, Olivine, Glass analysis, Pyroxene
Abstract: To verify the stereotype that basalt containing olivine is unrecommended for continuous fiber production, detailed case studies on the devitrification and fibration performances of glasses from olivine-added basalt were conducted. A typical basalt sample was adopted as the initial material, to whom different proportions of olivine (from 0 to 25 wt%) were mixed. The crystalline state, polymeric level, exothermic behavior, and fibration performance of the glasses/melts were discussed. The water-quenched glasses from melts at 1500 °C exhibited X-ray amorphous state even after 25 wt% of olivine added into the basalt. Analysis on the annealed glasses under elevated temperature indicated that olivine addition did not change the major crystalline types (pyroxene and feldspar), but increased their devitrification temperatures. A proper olivine ratio widened the fibration temperature interval (from 160 to 200 °C), and importantly, no direct relationship between the devitrification and drawing temperatures was established. Input of olivine adjusted the structural as well as viscous properties of silicate melts by generating more low-polymeric silicate units, which affected both the fibration behavior and fiber performance. In this view, logarithmic values of fiber diameter and the reciprocal of temperature were derived and proved as linear correlations. Present work proposes a viewpoint that it is an acceptable way to use special mineral, such as olivine, to adjust the suitable bulk composition of silicate system for continuous fiber production. [ABSTRACT FROM AUTHOR]
Copyright of Ceramics International is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 185523501
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Devitrification and fibration of silicate glass from basalt with olivine addition.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Liu%2C+Changjiang%22">Liu, Changjiang</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<i> liucj2017@hgu.edu.cn</i><br /><searchLink fieldCode="AR" term="%22Wu%2C+Hongwei%22">Wu, Hongwei</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Zhang%2C+Hankun%22">Zhang, Hankun</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Shi%2C+Qing%22">Shi, Qing</searchLink><relatesTo>3</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Li%2C+Hongchao%22">Li, Hongchao</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Kang%2C+Qian%22">Kang, Qian</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Tao%2C+Longfeng%22">Tao, Longfeng</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Ceramics+International%22">Ceramics International</searchLink>. Jun2025, Vol. 51 Issue 15, p21048-21054. 7p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Devitrification%22">Devitrification</searchLink><br /><searchLink fieldCode="DE" term="%22High+temperatures%22">High temperatures</searchLink><br /><searchLink fieldCode="DE" term="%22Basalt%22">Basalt</searchLink><br /><searchLink fieldCode="DE" term="%22Olivine%22">Olivine</searchLink><br /><searchLink fieldCode="DE" term="%22Glass+analysis%22">Glass analysis</searchLink><br /><searchLink fieldCode="DE" term="%22Pyroxene%22">Pyroxene</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: To verify the stereotype that basalt containing olivine is unrecommended for continuous fiber production, detailed case studies on the devitrification and fibration performances of glasses from olivine-added basalt were conducted. A typical basalt sample was adopted as the initial material, to whom different proportions of olivine (from 0 to 25 wt%) were mixed. The crystalline state, polymeric level, exothermic behavior, and fibration performance of the glasses/melts were discussed. The water-quenched glasses from melts at 1500 °C exhibited X-ray amorphous state even after 25 wt% of olivine added into the basalt. Analysis on the annealed glasses under elevated temperature indicated that olivine addition did not change the major crystalline types (pyroxene and feldspar), but increased their devitrification temperatures. A proper olivine ratio widened the fibration temperature interval (from 160 to 200 °C), and importantly, no direct relationship between the devitrification and drawing temperatures was established. Input of olivine adjusted the structural as well as viscous properties of silicate melts by generating more low-polymeric silicate units, which affected both the fibration behavior and fiber performance. In this view, logarithmic values of fiber diameter and the reciprocal of temperature were derived and proved as linear correlations. Present work proposes a viewpoint that it is an acceptable way to use special mineral, such as olivine, to adjust the suitable bulk composition of silicate system for continuous fiber production. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Ceramics International is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=185523501
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1016/j.ceramint.2025.02.273
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 7
        StartPage: 21048
    Subjects:
      – SubjectFull: Devitrification
        Type: general
      – SubjectFull: High temperatures
        Type: general
      – SubjectFull: Basalt
        Type: general
      – SubjectFull: Olivine
        Type: general
      – SubjectFull: Glass analysis
        Type: general
      – SubjectFull: Pyroxene
        Type: general
    Titles:
      – TitleFull: Devitrification and fibration of silicate glass from basalt with olivine addition.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Liu, Changjiang
      – PersonEntity:
          Name:
            NameFull: Wu, Hongwei
      – PersonEntity:
          Name:
            NameFull: Zhang, Hankun
      – PersonEntity:
          Name:
            NameFull: Shi, Qing
      – PersonEntity:
          Name:
            NameFull: Li, Hongchao
      – PersonEntity:
          Name:
            NameFull: Kang, Qian
      – PersonEntity:
          Name:
            NameFull: Tao, Longfeng
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 15
              M: 06
              Text: Jun2025
              Type: published
              Y: 2025
          Identifiers:
            – Type: issn-print
              Value: 02728842
          Numbering:
            – Type: volume
              Value: 51
            – Type: issue
              Value: 15
          Titles:
            – TitleFull: Ceramics International
              Type: main
ResultId 1