Higher than 60% Dielectric Tunability in Ba 0.6 Sr 0.4 TiO 3 Films Using TiO 2 Anatase Buffer Layers.
Saved in:
| Title: | Higher than 60% Dielectric Tunability in Ba 0.6 Sr 0.4 TiO 3 Films Using TiO 2 Anatase Buffer Layers. |
|---|---|
| Authors: | Zhang, Pengzhan1,2 (AUTHOR) pzzhang@jit.edu.cn, He, Jiaming1,2 (AUTHOR), Liu, Xinyu1 (AUTHOR), Zhang, Leng1,2 (AUTHOR), Zhang, Ling1 (AUTHOR), Wang, Danbei1 (AUTHOR), Wu, Kongpin1 (AUTHOR), Wang, Sake1 (AUTHOR) |
| Source: | Nanomaterials (2079-4991). Dec2025, Vol. 15 Issue 23, p1797. 17p. |
| Subjects: | Barium strontium titanate, Titanium dioxide films, Pulsed laser deposition, Electric properties, X-ray diffraction, Dielectric measurements, Microstructure |
| Abstract: | In this work, Ba0.6Sr0.4TiO3 (BST) films were deposited on Si(100) and Pt(111)/Ti/SiO2/Si(100) substrates using the pulsed laser deposition (PLD) technique. The effects of TiO2 buffer layer thickness and preparation temperature on the microstructure and electrical properties of BST films were studied in detail. We intensively investigated the influence of the TiO2 buffer layer on the microstructure of BST films by using X-ray diffraction and scanning electron microscopy. We found that anatase crystalline TiO2 buffer layers within 15 nm thicknesses could significantly change the BST films from an irregular orientation to the (111) preferential orientation. The TiO2 anatase layers could promote the growth of BST film grains for obtaining minimal stress and low lattice distortion, increase the nucleation density, and improve its surface morphology, resulting in higher dielectric constant and resistance voltage, and lower dielectric loss and leakage current density. The dielectric constant, dielectric loss, and dielectric tunability of the BST devices with 8 nm thick TiO2 anatase buffer layers at 1 MHz were 856.5, 0.017, and 64.3%, respectively. The achieved high dielectric tunability indicates BST with TiO2 anatase buffer layers as one of the encouraging candidates for RF and microwave tunable applications at room temperature. [ABSTRACT FROM AUTHOR] |
| Copyright of Nanomaterials (2079-4991) is the property of MDPI and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| FullText | Links: – Type: pdflink Text: Availability: 1 |
|---|---|
| Header | DbId: egs DbLabel: Engineering Source An: 190528470 AccessLevel: 6 PubType: Academic Journal PubTypeId: academicJournal PreciseRelevancyScore: 0 |
| IllustrationInfo | |
| Items | – Name: Title Label: Title Group: Ti Data: Higher than 60% Dielectric Tunability in Ba 0.6 Sr 0.4 TiO 3 Films Using TiO 2 Anatase Buffer Layers. – Name: Author Label: Authors Group: Au Data: <searchLink fieldCode="AR" term="%22Zhang%2C+Pengzhan%22">Zhang, Pengzhan</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<i> pzzhang@jit.edu.cn</i><br /><searchLink fieldCode="AR" term="%22He%2C+Jiaming%22">He, Jiaming</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Liu%2C+Xinyu%22">Liu, Xinyu</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Zhang%2C+Leng%22">Zhang, Leng</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Zhang%2C+Ling%22">Zhang, Ling</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Wang%2C+Danbei%22">Wang, Danbei</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Wu%2C+Kongpin%22">Wu, Kongpin</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Wang%2C+Sake%22">Wang, Sake</searchLink><relatesTo>1</relatesTo> (AUTHOR) – Name: TitleSource Label: Source Group: Src Data: <searchLink fieldCode="JN" term="%22Nanomaterials+%282079-4991%29%22">Nanomaterials (2079-4991)</searchLink>. Dec2025, Vol. 15 Issue 23, p1797. 17p. – Name: Subject Label: Subjects Group: Su Data: <searchLink fieldCode="DE" term="%22Barium+strontium+titanate%22">Barium strontium titanate</searchLink><br /><searchLink fieldCode="DE" term="%22Titanium+dioxide+films%22">Titanium dioxide films</searchLink><br /><searchLink fieldCode="DE" term="%22Pulsed+laser+deposition%22">Pulsed laser deposition</searchLink><br /><searchLink fieldCode="DE" term="%22Electric+properties%22">Electric properties</searchLink><br /><searchLink fieldCode="DE" term="%22X-ray+diffraction%22">X-ray diffraction</searchLink><br /><searchLink fieldCode="DE" term="%22Dielectric+measurements%22">Dielectric measurements</searchLink><br /><searchLink fieldCode="DE" term="%22Microstructure%22">Microstructure</searchLink> – Name: Abstract Label: Abstract Group: Ab Data: In this work, Ba0.6Sr0.4TiO3 (BST) films were deposited on Si(100) and Pt(111)/Ti/SiO2/Si(100) substrates using the pulsed laser deposition (PLD) technique. The effects of TiO2 buffer layer thickness and preparation temperature on the microstructure and electrical properties of BST films were studied in detail. We intensively investigated the influence of the TiO2 buffer layer on the microstructure of BST films by using X-ray diffraction and scanning electron microscopy. We found that anatase crystalline TiO2 buffer layers within 15 nm thicknesses could significantly change the BST films from an irregular orientation to the (111) preferential orientation. The TiO2 anatase layers could promote the growth of BST film grains for obtaining minimal stress and low lattice distortion, increase the nucleation density, and improve its surface morphology, resulting in higher dielectric constant and resistance voltage, and lower dielectric loss and leakage current density. The dielectric constant, dielectric loss, and dielectric tunability of the BST devices with 8 nm thick TiO2 anatase buffer layers at 1 MHz were 856.5, 0.017, and 64.3%, respectively. The achieved high dielectric tunability indicates BST with TiO2 anatase buffer layers as one of the encouraging candidates for RF and microwave tunable applications at room temperature. [ABSTRACT FROM AUTHOR] – Name: AbstractSuppliedCopyright Label: Group: Ab Data: <i>Copyright of Nanomaterials (2079-4991) is the property of MDPI and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.) |
| PLink | https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=190528470 |
| RecordInfo | BibRecord: BibEntity: Identifiers: – Type: doi Value: 10.3390/nano15231797 Languages: – Code: eng Text: English PhysicalDescription: Pagination: PageCount: 17 StartPage: 1797 Subjects: – SubjectFull: Barium strontium titanate Type: general – SubjectFull: Titanium dioxide films Type: general – SubjectFull: Pulsed laser deposition Type: general – SubjectFull: Electric properties Type: general – SubjectFull: X-ray diffraction Type: general – SubjectFull: Dielectric measurements Type: general – SubjectFull: Microstructure Type: general Titles: – TitleFull: Higher than 60% Dielectric Tunability in Ba 0.6 Sr 0.4 TiO 3 Films Using TiO 2 Anatase Buffer Layers. Type: main BibRelationships: HasContributorRelationships: – PersonEntity: Name: NameFull: Zhang, Pengzhan – PersonEntity: Name: NameFull: He, Jiaming – PersonEntity: Name: NameFull: Liu, Xinyu – PersonEntity: Name: NameFull: Zhang, Leng – PersonEntity: Name: NameFull: Zhang, Ling – PersonEntity: Name: NameFull: Wang, Danbei – PersonEntity: Name: NameFull: Wu, Kongpin – PersonEntity: Name: NameFull: Wang, Sake IsPartOfRelationships: – BibEntity: Dates: – D: 01 M: 12 Text: Dec2025 Type: published Y: 2025 Identifiers: – Type: issn-print Value: 20794991 Numbering: – Type: volume Value: 15 – Type: issue Value: 23 Titles: – TitleFull: Nanomaterials (2079-4991) Type: main |
| ResultId | 1 |