View in EDS PDF Full Text

OPTIMIZING FIBER TO ROLLER INTERACTION, FINISHER SPEED AND LEVELLING ACTION POINT VIA SPECTROGRAM ANALYSIS FOR IMPROVED YARN QUALITY.

Saved in:
Bibliographic Details
Title: OPTIMIZING FIBER TO ROLLER INTERACTION, FINISHER SPEED AND LEVELLING ACTION POINT VIA SPECTROGRAM ANALYSIS FOR IMPROVED YARN QUALITY.
Alternate Title: İPLİK KALİTESİNİN İYİLEŞTİRİLMESİ İÇİN LİF--SİLİNDİR ETKİLEŞİMİ, CER HIZI VE DÜZGÜNLEŞTİRME ETKİ NOKTASININ SPEKTROGRAM ANALİZİ İLE OPTİMİZASYONU.
Authors: AHMAD, Khalil1, FAROOQ, Assad2, KHAN, Nayab2, AWAIS, Muhammad2, HUSSAIN, Fiaz3 fiaz415@gachon.ac.kr
Source: Journal of Textiles & Engineers / Tekstil ve Mühendis. 2025, Vol. 32 Issue 140, p320-327. 8p.
Subjects: Yarn, Spectrograms, Finishes & finishing, Fibers
Abstract (English): The main objective of the present research is to improve yarn quality by improving yarn evenness and strength while increasing the finisher speed. In this study, using spectrogram analysis, the drafting wave behavior in the finisher sliver was examined on the RSBD-35 drawing frame. The polyester-cotton blend (80:20) was developed at the varying delivery speeds (400, 500, and 600 meter/min) drawing frame to evaluate changes in sliver evenness and yarn characteristics. Based on the spectrogram analysis, the processing parameters were optimized and the sliver for the yarn preparation was developed at drawing frame at the optimized leveling action point (LAP; 984 mm) and 65.5 grains/yards. The yarn of 30/1 (Ne) was developed from the prepared sliver using the conventional ring spinning process. The coefficient of variation of mass (CV%) of the prepared sliver samples was determined by the UsterTester-3 (UT-3). The fineness/count (Nec) of the prepared samples was determined by following the standard test method ASTM-D1907. The quality parameters of the yarn including thick imperfection index (IPI;), U%, CV%, hairiness were determined by UsterTester by following the standard test method (ASTM D1425). The results indicated that increasing the finisher speed (600 m/min) reduced the LAP (984 mm) for PC yarn without compromising yarn quality indicators; U% (9.63), CV% (12.22), IPI (133), hairiness (4.27), and strength (CLSP: 4953). These results demonstrate the effectiveness of optimizing draw frame parameters in balancing productivity with yarn quality. [ABSTRACT FROM AUTHOR]
Abstract (Turkish): Araştırmanın temel amacı, iplik düzgünlüğü ve mukavemetini geliştirerek iplik kalitesini iyileştirmek, aynı zamanda son pasaj cer hızını artırmaktır. Bu çalışmada, Spektrogram analizi kullanılarak RSBD-35 cer makinesinde son pasaj cer şeridindeki çekim dalgası davranışı incelenmiştir. Şerit düzgünlüğündeki ve iplik özelliklerindeki değişimleri değerlendirmek üzere polyester-pamuk karışımlı iplik (%80:%20) farklı çıkış hızlarında (400, 500 ve 600 m/dak) çalışan cer makinesinde üretilmiştir. İşlem parametreleri spektrogram analizine dayanarak optimize edilmiş ve cer makinesinde optimize edilmiş seviyeleme etki noktasında (SEN; 984 mm) ve 65.5 grain/yards ile iplik hazırlığı için kullanılacak şerit üretilmiştir. Hazırlanan şeritten konvansiyonel ring iplik eğirme prosesi kullanılarak 30/1 (Ne) numara iplik üretilmiştir. UsterTester-3 (UT-3) ile hazırlanan şerit numunelerin kütle değişim katsayısı (CV%), tespit edilmiştir. ASTM-D1907 standart test metodu izlenerek hazırlanan numunelerin incelik/numara (Ne) değeri tespit edilmiştir. ASTM D1425 standart test metodu izlenerek UsterTester cihazı ile ipliğin kalın yer kusur indeksi (IPI), U%, CV%, tüylülük gibi kalite parametreleri ölçülmüştür. Sonuçlar, finişer hızının artırılmasının (600 m/dak), iplik kalite göstergelerinden; U% (9.63), CV% (12.22), IPI (133), tüylülük (4.27) ve mukavemet (CLSP: 4953) değerlerinden ödün vermeden Polyester-Pamuk ipliği için seviyeleme etki noktasını (SEN) (984 mm) düşürdüğünü göstermiştir. Bu sonuçlar, cer makinesi parametrelerinin optimize edilmesinin, verimlilik ve iplik kalitesi arasında denge kurmadaki etkinliğini ortaya koymaktadır. [ABSTRACT FROM AUTHOR]
Copyright of Journal of Textiles & Engineers / Tekstil ve Mühendis is the property of Union of Chambers of Turkish Engineers & Architects, Chamber of Textile Engineers and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Links:
  – Type: pdflink
Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 190837194
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: OPTIMIZING FIBER TO ROLLER INTERACTION, FINISHER SPEED AND LEVELLING ACTION POINT VIA SPECTROGRAM ANALYSIS FOR IMPROVED YARN QUALITY.
– Name: TitleAlt
  Label: Alternate Title
  Group: TiAlt
  Data: İPLİK KALİTESİNİN İYİLEŞTİRİLMESİ İÇİN LİF--SİLİNDİR ETKİLEŞİMİ, CER HIZI VE DÜZGÜNLEŞTİRME ETKİ NOKTASININ SPEKTROGRAM ANALİZİ İLE OPTİMİZASYONU.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22AHMAD%2C+Khalil%22">AHMAD, Khalil</searchLink><relatesTo>1</relatesTo><br /><searchLink fieldCode="AR" term="%22FAROOQ%2C+Assad%22">FAROOQ, Assad</searchLink><relatesTo>2</relatesTo><br /><searchLink fieldCode="AR" term="%22KHAN%2C+Nayab%22">KHAN, Nayab</searchLink><relatesTo>2</relatesTo><br /><searchLink fieldCode="AR" term="%22AWAIS%2C+Muhammad%22">AWAIS, Muhammad</searchLink><relatesTo>2</relatesTo><br /><searchLink fieldCode="AR" term="%22HUSSAIN%2C+Fiaz%22">HUSSAIN, Fiaz</searchLink><relatesTo>3</relatesTo><i> fiaz415@gachon.ac.kr</i>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Journal+of+Textiles+%26+Engineers+%2F+Tekstil+ve+Mühendis%22">Journal of Textiles & Engineers / Tekstil ve Mühendis</searchLink>. 2025, Vol. 32 Issue 140, p320-327. 8p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Yarn%22">Yarn</searchLink><br /><searchLink fieldCode="DE" term="%22Spectrograms%22">Spectrograms</searchLink><br /><searchLink fieldCode="DE" term="%22Finishes+%26+finishing%22">Finishes & finishing</searchLink><br /><searchLink fieldCode="DE" term="%22Fibers%22">Fibers</searchLink>
– Name: Abstract
  Label: Abstract (English)
  Group: Ab
  Data: The main objective of the present research is to improve yarn quality by improving yarn evenness and strength while increasing the finisher speed. In this study, using spectrogram analysis, the drafting wave behavior in the finisher sliver was examined on the RSBD-35 drawing frame. The polyester-cotton blend (80:20) was developed at the varying delivery speeds (400, 500, and 600 meter/min) drawing frame to evaluate changes in sliver evenness and yarn characteristics. Based on the spectrogram analysis, the processing parameters were optimized and the sliver for the yarn preparation was developed at drawing frame at the optimized leveling action point (LAP; 984 mm) and 65.5 grains/yards. The yarn of 30/1 (Ne) was developed from the prepared sliver using the conventional ring spinning process. The coefficient of variation of mass (CV%) of the prepared sliver samples was determined by the UsterTester-3 (UT-3). The fineness/count (Nec) of the prepared samples was determined by following the standard test method ASTM-D1907. The quality parameters of the yarn including thick imperfection index (IPI;), U%, CV%, hairiness were determined by UsterTester by following the standard test method (ASTM D1425). The results indicated that increasing the finisher speed (600 m/min) reduced the LAP (984 mm) for PC yarn without compromising yarn quality indicators; U% (9.63), CV% (12.22), IPI (133), hairiness (4.27), and strength (CLSP: 4953). These results demonstrate the effectiveness of optimizing draw frame parameters in balancing productivity with yarn quality. [ABSTRACT FROM AUTHOR]
– Name: Abstract
  Label: Abstract (Turkish)
  Group: Ab
  Data: Araştırmanın temel amacı, iplik düzgünlüğü ve mukavemetini geliştirerek iplik kalitesini iyileştirmek, aynı zamanda son pasaj cer hızını artırmaktır. Bu çalışmada, Spektrogram analizi kullanılarak RSBD-35 cer makinesinde son pasaj cer şeridindeki çekim dalgası davranışı incelenmiştir. Şerit düzgünlüğündeki ve iplik özelliklerindeki değişimleri değerlendirmek üzere polyester-pamuk karışımlı iplik (%80:%20) farklı çıkış hızlarında (400, 500 ve 600 m/dak) çalışan cer makinesinde üretilmiştir. İşlem parametreleri spektrogram analizine dayanarak optimize edilmiş ve cer makinesinde optimize edilmiş seviyeleme etki noktasında (SEN; 984 mm) ve 65.5 grain/yards ile iplik hazırlığı için kullanılacak şerit üretilmiştir. Hazırlanan şeritten konvansiyonel ring iplik eğirme prosesi kullanılarak 30/1 (Ne) numara iplik üretilmiştir. UsterTester-3 (UT-3) ile hazırlanan şerit numunelerin kütle değişim katsayısı (CV%), tespit edilmiştir. ASTM-D1907 standart test metodu izlenerek hazırlanan numunelerin incelik/numara (Ne) değeri tespit edilmiştir. ASTM D1425 standart test metodu izlenerek UsterTester cihazı ile ipliğin kalın yer kusur indeksi (IPI), U%, CV%, tüylülük gibi kalite parametreleri ölçülmüştür. Sonuçlar, finişer hızının artırılmasının (600 m/dak), iplik kalite göstergelerinden; U% (9.63), CV% (12.22), IPI (133), tüylülük (4.27) ve mukavemet (CLSP: 4953) değerlerinden ödün vermeden Polyester-Pamuk ipliği için seviyeleme etki noktasını (SEN) (984 mm) düşürdüğünü göstermiştir. Bu sonuçlar, cer makinesi parametrelerinin optimize edilmesinin, verimlilik ve iplik kalitesi arasında denge kurmadaki etkinliğini ortaya koymaktadır. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Journal of Textiles & Engineers / Tekstil ve Mühendis is the property of Union of Chambers of Turkish Engineers & Architects, Chamber of Textile Engineers and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=190837194
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.7216/teksmuh.1695219
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 8
        StartPage: 320
    Subjects:
      – SubjectFull: Yarn
        Type: general
      – SubjectFull: Spectrograms
        Type: general
      – SubjectFull: Finishes & finishing
        Type: general
      – SubjectFull: Fibers
        Type: general
    Titles:
      – TitleFull: OPTIMIZING FIBER TO ROLLER INTERACTION, FINISHER SPEED AND LEVELLING ACTION POINT VIA SPECTROGRAM ANALYSIS FOR IMPROVED YARN QUALITY.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: AHMAD, Khalil
      – PersonEntity:
          Name:
            NameFull: FAROOQ, Assad
      – PersonEntity:
          Name:
            NameFull: KHAN, Nayab
      – PersonEntity:
          Name:
            NameFull: AWAIS, Muhammad
      – PersonEntity:
          Name:
            NameFull: HUSSAIN, Fiaz
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 10
              Text: 2025
              Type: published
              Y: 2025
          Identifiers:
            – Type: issn-print
              Value: 13007599
          Numbering:
            – Type: volume
              Value: 32
            – Type: issue
              Value: 140
          Titles:
            – TitleFull: Journal of Textiles & Engineers / Tekstil ve Mühendis
              Type: main
ResultId 1