Design Optimization and Control System of a Cascaded DAB–Buck Auxiliaries Power Module for EV Powertrains.
Saved in:
| Title: | Design Optimization and Control System of a Cascaded DAB–Buck Auxiliaries Power Module for EV Powertrains. |
|---|---|
| Authors: | Kotb, Ramy1,2 (AUTHOR), Dalir, Amin1,2 (AUTHOR), Chakraborty, Sajib1,2 (AUTHOR), Hegazy, Omar1,2 (AUTHOR) omar.hegazy@vub.be |
| Source: | Energies (19961073). Jan2026, Vol. 19 Issue 2, p431. 31p. |
| Subjects: | Electric vehicles, Power density, DC-to-DC converters, Electric power conversion, Supervisory control systems, Economic efficiency, Multidisciplinary design optimization |
| Abstract: | Auxiliary power demand in battery electric vehicles continues to increase as manufacturers transition toward multi-low-voltage architectures that combine 48 V and 12 V buses to improve load distribution flexibility and overall system efficiency. This paper evaluates several auxiliary power module (APM) architectures in terms of scalability, efficiency, complexity, size, and cost for supplying two low-voltage buses (e.g., 48 V and 12 V) from the high-voltage battery. Based on this assessment, a cascaded APM configuration is adopted, consisting of an isolated dual active bridge (DAB) converter followed by a non-isolated synchronous buck converter. A multi-objective optimization framework based on the NSGA-II algorithm is developed for the DAB stage to maximize efficiency and power density while minimizing cost. The optimized 13 kW DAB stage achieves a peak efficiency of 95% and a power density of 4.1 kW/L. For the 48 V/12 V buck stage, a 2 kW commercial GaN-based converter with a mass of 0.5 kg is used as the reference design, achieving a peak efficiency of 96.5%. Dedicated PI controllers are designed for both the DAB and buck stages using their respective small-signal models to ensure tight regulation of the two LV buses. The overall system stability is verified through impedance-based analysis. Experimental validation using a DAB prototype integrated with a multi-phase buck converter confirms the accuracy of the DAB loss modeling used in the design optimization framework as well as the control design implemented for the cascaded converters. [ABSTRACT FROM AUTHOR] |
| Copyright of Energies (19961073) is the property of MDPI and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| Abstract: | Auxiliary power demand in battery electric vehicles continues to increase as manufacturers transition toward multi-low-voltage architectures that combine 48 V and 12 V buses to improve load distribution flexibility and overall system efficiency. This paper evaluates several auxiliary power module (APM) architectures in terms of scalability, efficiency, complexity, size, and cost for supplying two low-voltage buses (e.g., 48 V and 12 V) from the high-voltage battery. Based on this assessment, a cascaded APM configuration is adopted, consisting of an isolated dual active bridge (DAB) converter followed by a non-isolated synchronous buck converter. A multi-objective optimization framework based on the NSGA-II algorithm is developed for the DAB stage to maximize efficiency and power density while minimizing cost. The optimized 13 kW DAB stage achieves a peak efficiency of 95% and a power density of 4.1 kW/L. For the 48 V/12 V buck stage, a 2 kW commercial GaN-based converter with a mass of 0.5 kg is used as the reference design, achieving a peak efficiency of 96.5%. Dedicated PI controllers are designed for both the DAB and buck stages using their respective small-signal models to ensure tight regulation of the two LV buses. The overall system stability is verified through impedance-based analysis. Experimental validation using a DAB prototype integrated with a multi-phase buck converter confirms the accuracy of the DAB loss modeling used in the design optimization framework as well as the control design implemented for the cascaded converters. [ABSTRACT FROM AUTHOR] |
|---|---|
| ISSN: | 19961073 |
| DOI: | 10.3390/en19020431 |
