View in EDS

Optimization of interfaces in ceramics with SiC addition engineering for thermal cycling implications.

Saved in:
Bibliographic Details
Title: Optimization of interfaces in ceramics with SiC addition engineering for thermal cycling implications.
Authors: Makokha, John. W.1 (AUTHOR), Szenti, Imre1 (AUTHOR), Boldizsár, Tamás2 (AUTHOR), Bán, Zsolt2 (AUTHOR), Sebők‐Papp, Imre2 (AUTHOR), Nagy, László1,2 (AUTHOR), Kozma, Gábor1 (AUTHOR), Sápi, András1 (AUTHOR) sapia@chem.u-szeged.hu, Kukovecz, Ákos1 (AUTHOR), Kónya, Zoltán1,3 (AUTHOR)
Source: Journal of the American Ceramic Society. Jan2026, Vol. 109 Issue 1, p1-12. 12p.
Subjects: Silicon carbide, Solid-solid interfaces, Thermal conductivity, Thermocycling, Flexural strength, Ceramics, Fiber-reinforced ceramics, Thermal properties
Abstract: This study investigated how SiC PSD influences solid–solid interface to enhance thermal–mechanical properties of ceramic composites. Initial SiCmp particles were milled for 3 h at 200 rpm (microns) and 600 rpm (submicrons) to tune the PSD, and their impact was evaluated in cordierite–mullite matrix, sintered at 1360°C. XRD analysis confirmed 2θ peaks at 18° and 29.5° for cordierite, 35.65°, 41.35°, and 59.95° for SiC, and 26.2° and 33.1° for mullite. SEM–EDX analysis indicated a trace amount of SiO2 amorphous phase and consistent cordierite honeycomb–lamellar microstructure with coarse‐grained mullite. Macro SiC increased pore size and porosity attributed to their poor packing and air entrapment, whereas micron‐ and submicron‐sized SiC reduced porosity relative to pore size distribution. Flexural strength varied with SiC content and PSD. Although strength was reduced by increasing macro SiC, it was maintained up to ∼6 wt% by micron/submicron SiC. Thermal conductivity improved regardless of SiC size, with ∼6.0 wt% SiC microns (SiCµm)/submicron particles (SiCnp) yielding ∼34% enhancement. In subsequent thermal shock quenching cycles, composites containing ∼6 ± 0.42 wt% SiCµm retained ∼15% ± 1.79% higher residual flexural strength compared to mullite–cordierite, demonstrating improved thermal shock resistance. The enhancement is due to SiCµm reducing thermal barriers through improved solid–solid interface contact, minimizing thermal gradients and preserving structural integrity during high‐temperature cycling. [ABSTRACT FROM AUTHOR]
Copyright of Journal of the American Ceramic Society is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 191210610
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Optimization of interfaces in ceramics with SiC addition engineering for thermal cycling implications.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Makokha%2C+John%2E+W%2E%22">Makokha, John. W.</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Szenti%2C+Imre%22">Szenti, Imre</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Boldizsár%2C+Tamás%22">Boldizsár, Tamás</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Bán%2C+Zsolt%22">Bán, Zsolt</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Sebők‐Papp%2C+Imre%22">Sebők‐Papp, Imre</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Nagy%2C+László%22">Nagy, László</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Kozma%2C+Gábor%22">Kozma, Gábor</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Sápi%2C+András%22">Sápi, András</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> sapia@chem.u-szeged.hu</i><br /><searchLink fieldCode="AR" term="%22Kukovecz%2C+Ákos%22">Kukovecz, Ákos</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Kónya%2C+Zoltán%22">Kónya, Zoltán</searchLink><relatesTo>1,3</relatesTo> (AUTHOR)
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Journal+of+the+American+Ceramic+Society%22">Journal of the American Ceramic Society</searchLink>. Jan2026, Vol. 109 Issue 1, p1-12. 12p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Silicon+carbide%22">Silicon carbide</searchLink><br /><searchLink fieldCode="DE" term="%22Solid-solid+interfaces%22">Solid-solid interfaces</searchLink><br /><searchLink fieldCode="DE" term="%22Thermal+conductivity%22">Thermal conductivity</searchLink><br /><searchLink fieldCode="DE" term="%22Thermocycling%22">Thermocycling</searchLink><br /><searchLink fieldCode="DE" term="%22Flexural+strength%22">Flexural strength</searchLink><br /><searchLink fieldCode="DE" term="%22Ceramics%22">Ceramics</searchLink><br /><searchLink fieldCode="DE" term="%22Fiber-reinforced+ceramics%22">Fiber-reinforced ceramics</searchLink><br /><searchLink fieldCode="DE" term="%22Thermal+properties%22">Thermal properties</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: This study investigated how SiC PSD influences solid–solid interface to enhance thermal–mechanical properties of ceramic composites. Initial SiCmp particles were milled for 3 h at 200 rpm (microns) and 600 rpm (submicrons) to tune the PSD, and their impact was evaluated in cordierite–mullite matrix, sintered at 1360°C. XRD analysis confirmed 2θ peaks at 18° and 29.5° for cordierite, 35.65°, 41.35°, and 59.95° for SiC, and 26.2° and 33.1° for mullite. SEM–EDX analysis indicated a trace amount of SiO2 amorphous phase and consistent cordierite honeycomb–lamellar microstructure with coarse‐grained mullite. Macro SiC increased pore size and porosity attributed to their poor packing and air entrapment, whereas micron‐ and submicron‐sized SiC reduced porosity relative to pore size distribution. Flexural strength varied with SiC content and PSD. Although strength was reduced by increasing macro SiC, it was maintained up to ∼6 wt% by micron/submicron SiC. Thermal conductivity improved regardless of SiC size, with ∼6.0 wt% SiC microns (SiCµm)/submicron particles (SiCnp) yielding ∼34% enhancement. In subsequent thermal shock quenching cycles, composites containing ∼6 ± 0.42 wt% SiCµm retained ∼15% ± 1.79% higher residual flexural strength compared to mullite–cordierite, demonstrating improved thermal shock resistance. The enhancement is due to SiCµm reducing thermal barriers through improved solid–solid interface contact, minimizing thermal gradients and preserving structural integrity during high‐temperature cycling. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Journal of the American Ceramic Society is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=191210610
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1111/jace.70283
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 12
        StartPage: 1
    Subjects:
      – SubjectFull: Silicon carbide
        Type: general
      – SubjectFull: Solid-solid interfaces
        Type: general
      – SubjectFull: Thermal conductivity
        Type: general
      – SubjectFull: Thermocycling
        Type: general
      – SubjectFull: Flexural strength
        Type: general
      – SubjectFull: Ceramics
        Type: general
      – SubjectFull: Fiber-reinforced ceramics
        Type: general
      – SubjectFull: Thermal properties
        Type: general
    Titles:
      – TitleFull: Optimization of interfaces in ceramics with SiC addition engineering for thermal cycling implications.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Makokha, John. W.
      – PersonEntity:
          Name:
            NameFull: Szenti, Imre
      – PersonEntity:
          Name:
            NameFull: Boldizsár, Tamás
      – PersonEntity:
          Name:
            NameFull: Bán, Zsolt
      – PersonEntity:
          Name:
            NameFull: Sebők‐Papp, Imre
      – PersonEntity:
          Name:
            NameFull: Nagy, László
      – PersonEntity:
          Name:
            NameFull: Kozma, Gábor
      – PersonEntity:
          Name:
            NameFull: Sápi, András
      – PersonEntity:
          Name:
            NameFull: Kukovecz, Ákos
      – PersonEntity:
          Name:
            NameFull: Kónya, Zoltán
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 01
              Text: Jan2026
              Type: published
              Y: 2026
          Identifiers:
            – Type: issn-print
              Value: 00027820
          Numbering:
            – Type: volume
              Value: 109
            – Type: issue
              Value: 1
          Titles:
            – TitleFull: Journal of the American Ceramic Society
              Type: main
ResultId 1