View in EDS

Synergistic effect of graphite fillers on electrical and mechanical properties of Co-continuous PVDF/PP composites.

Saved in:
Bibliographic Details
Title: Synergistic effect of graphite fillers on electrical and mechanical properties of Co-continuous PVDF/PP composites.
Authors: Shojaei, Sahar1,2 (AUTHOR), Rostami-Tapeh-Esmaeil, Ehsan1,2 (AUTHOR), Mighri, Frej1,2 (AUTHOR) Frej.Mighri@gch.ulaval.ca, Elkoun, Saïd1,3 (AUTHOR), Brassard, Martin4 (AUTHOR), Oliaii, Elaheh4 (AUTHOR), Pelletier, Philippe5 (AUTHOR), Jourdain, Guy5 (AUTHOR), Bonnefoy, Yves5 (AUTHOR), Saad, Mohamed1,2 (AUTHOR)
Source: Journal of Reinforced Plastics & Composites. Apr2026, Vol. 45 Issue 7/8, p1580-1595. 16p.
Subjects: Graphite composites, Electric conductivity, Mechanical behavior of materials, Conducting polymer composites, Proton exchange membrane fuel cells, Filler materials, Thermal stability, Composite structures
Abstract: This study explores the development of conductive co-continuous polyvinylidene fluoride/polypropylene/graphite (PVDF/PP/GR) composites with varying PVDF/PP ratios (60:40 and 70:30) to evaluate the effects of single and hybrid GR fillers on composites' electrical conductivity, morphology, thermal stability, and mechanical properties. The composites were prepared with GR fillers ranging from 20 to 60 wt.% and particle sizes between 5.9 and 564 µm. Morphological analysis using scanning electron microscopy (SEM), supported by selective solvent extraction of the PVDF phase, confirmed a well-developed co-continuous structure at a PVDF/PP ratio of 70:30. Key performance metrics, including through-plane electrical resistivity (inverse of conductivity), thermal degradation, and mechanical strength, were systematically analyzed. The results showed that the addition of 60 wt.% GR reduced melting temperature while improved overall crystallinity and the degradation temperature from 440°C to 480°C, with a corresponding increase in residual ash content from 15 to 70 wt.%. Among the single-filler composites, medium-sized GR particles (17.8 µm) at 60 wt.% in the PVDF/PP (70:30) system exhibited the lowest electrical resistivity (3.41 Ω·cm). Additionally, the incorporation of 60 wt.% hybrid GR fillers, mixture of medium (17.8 µm) and large (561 µm) particles in an 80:20 ratio, further reduced resistivity to 1.17 Ω·cm, showing the synergistic effect of hybrid GR fillers of different sizes. Small GR particles act as bridges between the larger ones, leading to a more electrically conductive GR network. Mechanical testing revealed a flexural modulus ranging from 0.9 to 9.9 GPa and a flexural strength ranging from 7.0 to 26.3 MPa. The compressive elastic modulus varied between 0.1 and 0.2 GPa, while the compressive strength ranged from 7.8 to 22.9 MPa. These results highlight the suitability of PVDF/PP/GR composites as electrically conductive materials, particularly for applications in proton exchange membrane fuel cell (PEMFC) bipolar plates, as their main properties are in the range aimed by the U.S. Department of Energy (DoE). [ABSTRACT FROM AUTHOR]
Copyright of Journal of Reinforced Plastics & Composites is the property of Sage Publications, Ltd. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 192252320
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Synergistic effect of graphite fillers on electrical and mechanical properties of Co-continuous PVDF/PP composites.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Shojaei%2C+Sahar%22">Shojaei, Sahar</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Rostami-Tapeh-Esmaeil%2C+Ehsan%22">Rostami-Tapeh-Esmaeil, Ehsan</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Mighri%2C+Frej%22">Mighri, Frej</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<i> Frej.Mighri@gch.ulaval.ca</i><br /><searchLink fieldCode="AR" term="%22Elkoun%2C+Saïd%22">Elkoun, Saïd</searchLink><relatesTo>1,3</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Brassard%2C+Martin%22">Brassard, Martin</searchLink><relatesTo>4</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Oliaii%2C+Elaheh%22">Oliaii, Elaheh</searchLink><relatesTo>4</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Pelletier%2C+Philippe%22">Pelletier, Philippe</searchLink><relatesTo>5</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Jourdain%2C+Guy%22">Jourdain, Guy</searchLink><relatesTo>5</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Bonnefoy%2C+Yves%22">Bonnefoy, Yves</searchLink><relatesTo>5</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Saad%2C+Mohamed%22">Saad, Mohamed</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Journal+of+Reinforced+Plastics+%26+Composites%22">Journal of Reinforced Plastics & Composites</searchLink>. Apr2026, Vol. 45 Issue 7/8, p1580-1595. 16p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Graphite+composites%22">Graphite composites</searchLink><br /><searchLink fieldCode="DE" term="%22Electric+conductivity%22">Electric conductivity</searchLink><br /><searchLink fieldCode="DE" term="%22Mechanical+behavior+of+materials%22">Mechanical behavior of materials</searchLink><br /><searchLink fieldCode="DE" term="%22Conducting+polymer+composites%22">Conducting polymer composites</searchLink><br /><searchLink fieldCode="DE" term="%22Proton+exchange+membrane+fuel+cells%22">Proton exchange membrane fuel cells</searchLink><br /><searchLink fieldCode="DE" term="%22Filler+materials%22">Filler materials</searchLink><br /><searchLink fieldCode="DE" term="%22Thermal+stability%22">Thermal stability</searchLink><br /><searchLink fieldCode="DE" term="%22Composite+structures%22">Composite structures</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: This study explores the development of conductive co-continuous polyvinylidene fluoride/polypropylene/graphite (PVDF/PP/GR) composites with varying PVDF/PP ratios (60:40 and 70:30) to evaluate the effects of single and hybrid GR fillers on composites' electrical conductivity, morphology, thermal stability, and mechanical properties. The composites were prepared with GR fillers ranging from 20 to 60 wt.% and particle sizes between 5.9 and 564 µm. Morphological analysis using scanning electron microscopy (SEM), supported by selective solvent extraction of the PVDF phase, confirmed a well-developed co-continuous structure at a PVDF/PP ratio of 70:30. Key performance metrics, including through-plane electrical resistivity (inverse of conductivity), thermal degradation, and mechanical strength, were systematically analyzed. The results showed that the addition of 60 wt.% GR reduced melting temperature while improved overall crystallinity and the degradation temperature from 440°C to 480°C, with a corresponding increase in residual ash content from 15 to 70 wt.%. Among the single-filler composites, medium-sized GR particles (17.8 µm) at 60 wt.% in the PVDF/PP (70:30) system exhibited the lowest electrical resistivity (3.41 Ω·cm). Additionally, the incorporation of 60 wt.% hybrid GR fillers, mixture of medium (17.8 µm) and large (561 µm) particles in an 80:20 ratio, further reduced resistivity to 1.17 Ω·cm, showing the synergistic effect of hybrid GR fillers of different sizes. Small GR particles act as bridges between the larger ones, leading to a more electrically conductive GR network. Mechanical testing revealed a flexural modulus ranging from 0.9 to 9.9 GPa and a flexural strength ranging from 7.0 to 26.3 MPa. The compressive elastic modulus varied between 0.1 and 0.2 GPa, while the compressive strength ranged from 7.8 to 22.9 MPa. These results highlight the suitability of PVDF/PP/GR composites as electrically conductive materials, particularly for applications in proton exchange membrane fuel cell (PEMFC) bipolar plates, as their main properties are in the range aimed by the U.S. Department of Energy (DoE). [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Journal of Reinforced Plastics & Composites is the property of Sage Publications, Ltd. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=192252320
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1177/07316844251332008
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 16
        StartPage: 1580
    Subjects:
      – SubjectFull: Graphite composites
        Type: general
      – SubjectFull: Electric conductivity
        Type: general
      – SubjectFull: Mechanical behavior of materials
        Type: general
      – SubjectFull: Conducting polymer composites
        Type: general
      – SubjectFull: Proton exchange membrane fuel cells
        Type: general
      – SubjectFull: Filler materials
        Type: general
      – SubjectFull: Thermal stability
        Type: general
      – SubjectFull: Composite structures
        Type: general
    Titles:
      – TitleFull: Synergistic effect of graphite fillers on electrical and mechanical properties of Co-continuous PVDF/PP composites.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Shojaei, Sahar
      – PersonEntity:
          Name:
            NameFull: Rostami-Tapeh-Esmaeil, Ehsan
      – PersonEntity:
          Name:
            NameFull: Mighri, Frej
      – PersonEntity:
          Name:
            NameFull: Elkoun, Saïd
      – PersonEntity:
          Name:
            NameFull: Brassard, Martin
      – PersonEntity:
          Name:
            NameFull: Oliaii, Elaheh
      – PersonEntity:
          Name:
            NameFull: Pelletier, Philippe
      – PersonEntity:
          Name:
            NameFull: Jourdain, Guy
      – PersonEntity:
          Name:
            NameFull: Bonnefoy, Yves
      – PersonEntity:
          Name:
            NameFull: Saad, Mohamed
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 04
              Text: Apr2026
              Type: published
              Y: 2026
          Identifiers:
            – Type: issn-print
              Value: 07316844
          Numbering:
            – Type: volume
              Value: 45
            – Type: issue
              Value: 7/8
          Titles:
            – TitleFull: Journal of Reinforced Plastics & Composites
              Type: main
ResultId 1