View in EDS PDF Full Text

Image processing method for defect images of ferromagnetic metal casings based on pulsed eddy current testing.

Saved in:
Bibliographic Details
Title: Image processing method for defect images of ferromagnetic metal casings based on pulsed eddy current testing.
Authors: DENG, Yong1,2 201231010013@swpu.edu.cn, SONG, Dilin1,2, SUN, Hu1,2
Source: Journal of Measurement Science & Instrumentation. Mar2026, Vol. 17 Issue 1, p78-87. 16p.
Subjects: Image processing, Eddy current testing, Noise control, Engineering inspection, Image enhancement (Imaging systems), Signal denoising
Abstract: In oil and gas extraction, ferromagnetic metal casings serve as critical infrastructure to ensure the safety of hydrocarbon transport. However, under high-temperature and high-pressure conditions, casings buried deep underground are prone to deformation, twisting, and even rupture due to erosion and corrosion, potentially leading to significant economic losses and safety hazards. Therefore, regular inspection and maintenance of in-service well casings are essential. Pulsed eddy current testing (PECT) has been widely used for casing defect detection owing to its efficiency, non-contact nature, and rich information content. However, the presence of substantial noise during detection degrades the quality of defect detection images. To address this issue, we investigated image processing techniques for casing defect detection images and proposed an image processing algorithm (BIC) based on bidimensional empirical mode decomposition (BEMD), improved wavelet threshold denoising (IWTD), and contrast limited adaptive histogram equalization (CLAHE). The proposed method first applied BEMD-IWTD for noise suppression in defect detection images, followed by CLAHE for image enhancement. To validate the effectiveness of the method, defect detection experiments were conducted on casings with ring-shaped and local defects, and the acquired images were processed. After being processed with the BIC algorithm, ring-shaped defects of different depths could be effectively distinguished, especially the 1 mm and 2 mm deep defects that were previously affected by noise. In the local defect images, small-sized defects difficult to be identified due to noise interference were successfully recognized, and the defect contrast Cd was significantly improved. The results demonstrate that the proposed BIC algorithm effectively suppresses the noise in defect detection images, enhances the contrast between defects and the background, and improves defect recognition and detection accuracy, providing reliable image processing support for subsequent defect analysis [ABSTRACT FROM AUTHOR]
Copyright of Journal of Measurement Science & Instrumentation is the property of Journal of Measurement Science & Instrumentation and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Links:
  – Type: pdflink
Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 193822114
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Image processing method for defect images of ferromagnetic metal casings based on pulsed eddy current testing.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22DENG%2C+Yong%22">DENG, Yong</searchLink><relatesTo>1,2</relatesTo><i> 201231010013@swpu.edu.cn</i><br /><searchLink fieldCode="AR" term="%22SONG%2C+Dilin%22">SONG, Dilin</searchLink><relatesTo>1,2</relatesTo><br /><searchLink fieldCode="AR" term="%22SUN%2C+Hu%22">SUN, Hu</searchLink><relatesTo>1,2</relatesTo>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Journal+of+Measurement+Science+%26+Instrumentation%22">Journal of Measurement Science & Instrumentation</searchLink>. Mar2026, Vol. 17 Issue 1, p78-87. 16p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Image+processing%22">Image processing</searchLink><br /><searchLink fieldCode="DE" term="%22Eddy+current+testing%22">Eddy current testing</searchLink><br /><searchLink fieldCode="DE" term="%22Noise+control%22">Noise control</searchLink><br /><searchLink fieldCode="DE" term="%22Engineering+inspection%22">Engineering inspection</searchLink><br /><searchLink fieldCode="DE" term="%22Image+enhancement+%28Imaging+systems%29%22">Image enhancement (Imaging systems)</searchLink><br /><searchLink fieldCode="DE" term="%22Signal+denoising%22">Signal denoising</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: In oil and gas extraction, ferromagnetic metal casings serve as critical infrastructure to ensure the safety of hydrocarbon transport. However, under high-temperature and high-pressure conditions, casings buried deep underground are prone to deformation, twisting, and even rupture due to erosion and corrosion, potentially leading to significant economic losses and safety hazards. Therefore, regular inspection and maintenance of in-service well casings are essential. Pulsed eddy current testing (PECT) has been widely used for casing defect detection owing to its efficiency, non-contact nature, and rich information content. However, the presence of substantial noise during detection degrades the quality of defect detection images. To address this issue, we investigated image processing techniques for casing defect detection images and proposed an image processing algorithm (BIC) based on bidimensional empirical mode decomposition (BEMD), improved wavelet threshold denoising (IWTD), and contrast limited adaptive histogram equalization (CLAHE). The proposed method first applied BEMD-IWTD for noise suppression in defect detection images, followed by CLAHE for image enhancement. To validate the effectiveness of the method, defect detection experiments were conducted on casings with ring-shaped and local defects, and the acquired images were processed. After being processed with the BIC algorithm, ring-shaped defects of different depths could be effectively distinguished, especially the 1 mm and 2 mm deep defects that were previously affected by noise. In the local defect images, small-sized defects difficult to be identified due to noise interference were successfully recognized, and the defect contrast Cd was significantly improved. The results demonstrate that the proposed BIC algorithm effectively suppresses the noise in defect detection images, enhances the contrast between defects and the background, and improves defect recognition and detection accuracy, providing reliable image processing support for subsequent defect analysis [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Journal of Measurement Science & Instrumentation is the property of Journal of Measurement Science & Instrumentation and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=193822114
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.62756/jmsi.1674-8042.2026006
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 16
        StartPage: 78
    Subjects:
      – SubjectFull: Image processing
        Type: general
      – SubjectFull: Eddy current testing
        Type: general
      – SubjectFull: Noise control
        Type: general
      – SubjectFull: Engineering inspection
        Type: general
      – SubjectFull: Image enhancement (Imaging systems)
        Type: general
      – SubjectFull: Signal denoising
        Type: general
    Titles:
      – TitleFull: Image processing method for defect images of ferromagnetic metal casings based on pulsed eddy current testing.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: DENG, Yong
      – PersonEntity:
          Name:
            NameFull: SONG, Dilin
      – PersonEntity:
          Name:
            NameFull: SUN, Hu
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 03
              Text: Mar2026
              Type: published
              Y: 2026
          Identifiers:
            – Type: issn-print
              Value: 16748042
          Numbering:
            – Type: volume
              Value: 17
            – Type: issue
              Value: 1
          Titles:
            – TitleFull: Journal of Measurement Science & Instrumentation
              Type: main
ResultId 1