View in EDS

Dynamic Friction Coefficient Measurement Using a New Torsion Split-Hopkinson Bar Technique.

Saved in:
Bibliographic Details
Title: Dynamic Friction Coefficient Measurement Using a New Torsion Split-Hopkinson Bar Technique.
Authors: Jarachi, M.1 (AUTHOR) mj1515@msstate.edu, Duncan, A.1 (AUTHOR), Zhang, L.1 (AUTHOR), Rhee, H.1 (AUTHOR), Hammi, Y.1 (AUTHOR), Kundu, S.2 (AUTHOR), Williams, B. A.3 (AUTHOR), Whittington, W. R.1 (AUTHOR)
Source: Experimental Techniques. Jun2026, Vol. 50 Issue 3, p413-424. 12p.
Subjects: Sliding friction, Hopkinson bars (Testing), Lubrication & lubricants, High-speed photography, Digital image correlation, Compressive force, Static friction
Abstract: In this work, a Torsional Split-Hopkinson Bar (TSHB) was modified for rotating thin-walled steel rings in contact with a concrete disk under static precompression. The modified TSHB has been calibrated using Digital Image Correlation (DIC) Vic 2D software in combination with a Photron Fastcam high-speed camera. Using this modified TSHB, the velocity-dependent coefficient of friction between C300 maraging steel and concrete has been investigated. Three high strength types of concrete have been studied either in dry and lubricated conditions. It has been established that the friction coefficient decreases first rapidly as a function of velocity and it seems to stabilize after a certain velocity. The effects of lubrication on the frictional forces can be seen in the consistent reduction of the friction coefficient. Moreover, two axial forces of 7 and 10 MPa were applied to assess their effect on the friction coefficient. It was found that under dry conditions, the coefficient of friction increases slightly as the applied normal pressure increases for fiber-reinforced concretes, but it decreases for unreinforced concrete probably due to its brittle behavior. Finally, the static friction coefficient, which is the first value recorded when the sliding motion is produced, was validated by the inclined plane method. All of these observations are in good agreement with the friction theory and offer proof of the validity of the modified TSHB test method. [ABSTRACT FROM AUTHOR]
Copyright of Experimental Techniques is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 194163176
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Dynamic Friction Coefficient Measurement Using a New Torsion Split-Hopkinson Bar Technique.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Jarachi%2C+M%2E%22">Jarachi, M.</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> mj1515@msstate.edu</i><br /><searchLink fieldCode="AR" term="%22Duncan%2C+A%2E%22">Duncan, A.</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Zhang%2C+L%2E%22">Zhang, L.</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Rhee%2C+H%2E%22">Rhee, H.</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Hammi%2C+Y%2E%22">Hammi, Y.</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Kundu%2C+S%2E%22">Kundu, S.</searchLink><relatesTo>2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Williams%2C+B%2E+A%2E%22">Williams, B. A.</searchLink><relatesTo>3</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Whittington%2C+W%2E+R%2E%22">Whittington, W. R.</searchLink><relatesTo>1</relatesTo> (AUTHOR)
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Experimental+Techniques%22">Experimental Techniques</searchLink>. Jun2026, Vol. 50 Issue 3, p413-424. 12p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Sliding+friction%22">Sliding friction</searchLink><br /><searchLink fieldCode="DE" term="%22Hopkinson+bars+%28Testing%29%22">Hopkinson bars (Testing)</searchLink><br /><searchLink fieldCode="DE" term="%22Lubrication+%26+lubricants%22">Lubrication & lubricants</searchLink><br /><searchLink fieldCode="DE" term="%22High-speed+photography%22">High-speed photography</searchLink><br /><searchLink fieldCode="DE" term="%22Digital+image+correlation%22">Digital image correlation</searchLink><br /><searchLink fieldCode="DE" term="%22Compressive+force%22">Compressive force</searchLink><br /><searchLink fieldCode="DE" term="%22Static+friction%22">Static friction</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: In this work, a Torsional Split-Hopkinson Bar (TSHB) was modified for rotating thin-walled steel rings in contact with a concrete disk under static precompression. The modified TSHB has been calibrated using Digital Image Correlation (DIC) Vic 2D software in combination with a Photron Fastcam high-speed camera. Using this modified TSHB, the velocity-dependent coefficient of friction between C300 maraging steel and concrete has been investigated. Three high strength types of concrete have been studied either in dry and lubricated conditions. It has been established that the friction coefficient decreases first rapidly as a function of velocity and it seems to stabilize after a certain velocity. The effects of lubrication on the frictional forces can be seen in the consistent reduction of the friction coefficient. Moreover, two axial forces of 7 and 10 MPa were applied to assess their effect on the friction coefficient. It was found that under dry conditions, the coefficient of friction increases slightly as the applied normal pressure increases for fiber-reinforced concretes, but it decreases for unreinforced concrete probably due to its brittle behavior. Finally, the static friction coefficient, which is the first value recorded when the sliding motion is produced, was validated by the inclined plane method. All of these observations are in good agreement with the friction theory and offer proof of the validity of the modified TSHB test method. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Experimental Techniques is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=194163176
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1007/s40799-025-00822-4
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 12
        StartPage: 413
    Subjects:
      – SubjectFull: Sliding friction
        Type: general
      – SubjectFull: Hopkinson bars (Testing)
        Type: general
      – SubjectFull: Lubrication & lubricants
        Type: general
      – SubjectFull: High-speed photography
        Type: general
      – SubjectFull: Digital image correlation
        Type: general
      – SubjectFull: Compressive force
        Type: general
      – SubjectFull: Static friction
        Type: general
    Titles:
      – TitleFull: Dynamic Friction Coefficient Measurement Using a New Torsion Split-Hopkinson Bar Technique.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Jarachi, M.
      – PersonEntity:
          Name:
            NameFull: Duncan, A.
      – PersonEntity:
          Name:
            NameFull: Zhang, L.
      – PersonEntity:
          Name:
            NameFull: Rhee, H.
      – PersonEntity:
          Name:
            NameFull: Hammi, Y.
      – PersonEntity:
          Name:
            NameFull: Kundu, S.
      – PersonEntity:
          Name:
            NameFull: Williams, B. A.
      – PersonEntity:
          Name:
            NameFull: Whittington, W. R.
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 06
              Text: Jun2026
              Type: published
              Y: 2026
          Identifiers:
            – Type: issn-print
              Value: 07328818
          Numbering:
            – Type: volume
              Value: 50
            – Type: issue
              Value: 3
          Titles:
            – TitleFull: Experimental Techniques
              Type: main
ResultId 1