Modelling biohydrogen production from residual hydrocarbons by immobilized bacteria using COMSOL multiphysics.
Saved in:
| Title: | Modelling biohydrogen production from residual hydrocarbons by immobilized bacteria using COMSOL multiphysics. |
|---|---|
| Authors: | Abutu, David1,2 (AUTHOR) pcz23024@adab.umpsa.edu.my, Wan Yussof, Hafizuddin1 (AUTHOR), Nyah, Francis1 (AUTHOR), Ikechukwu Nwaichi, Peter1 (AUTHOR), Umunnawuike, Chika1 (AUTHOR), Agi, Augustine1,3 (AUTHOR) augustine@umpsa.edu.my |
| Source: | Biomass & Bioenergy. Aug2026, Vol. 211, pN.PAG-N.PAG. 1p. |
| Subjects: | Hydrogen production, Simulation software, Biofilms, Reaction-diffusion equations, Petroleum reservoirs, Hydrocarbons, Thermophilic bacteria |
| Abstract: | Growing demand for low-carbon energy has increased interest in biological hydrogen production from unconventional resources. Residual hydrocarbons in depleted oil reservoirs offer a potential substrate for thermophilic biohydrogen generation, but integrated experimental modelling studies under reservoir conditions remain limited. This study investigates biohydrogen generation from residual hydrocarbons within a simulated media mimicking a depleted oil reservoir, combining batch experiments with COMSOL Multiphysics® modelling. Laboratory trials at 68.4 °C showed a progressive increase in hydrogen concentration from 0 to 7.63 mmol L−1 within 168 h, corresponding to a 37 % substrate utilization. A three-dimensional axisymmetric domain was implemented in COMSOL Multiphysics by coupling the transport of diluted species, coefficient form PDE, and heat transfer in porous media interfaces to simulate substrate diffusion, microbial reaction kinetics, and thermal effects within the porous reservoir system. The model achieved close agreement with experimental data (R2 = 0.985; mean deviation = 7.8 %). Simulated peak hydrogen concentration reached 7.45 mmol L−1 at 168 h, with maximum biomass density of 1.8 × 107 cells cm−3 localized around immobilized beads. Sensitivity analysis indicated that a 10 % decrease in substrate diffusivity reduced hydrogen yield by 8.6 %, while temperatures above 72 °C decreased microbial activity by 12 %. Distribution plots revealed hydrogen accumulation zones extending 2-3 mm from bead surfaces, governed by local diffusion–reaction coupling. Model-predicted hydrogen productivity of 1.05 mmol L−1 h−1 validated the experimental average of 1.09 mmol L−1 h−1. These findings show residual hydrocarbons can support thermophilic biohydrogen in depleted reservoirs, and COMSOL modelling effectively predicts and optimizes subsurface production processes. • COMSOL-based model was used for biohydrogen production in porous media. • Hydrocarbon degradation by immobilized thermophilic bacteria was simulated. • Laboratory experiments showed a progressive increase from 0 to 7.63 mmol L−1 • Simulated hydrogen concentration reached 7.45 mmol L−1 at 168 h. • Hydrogen yields predicted with <8 % deviation from experiments. [ABSTRACT FROM AUTHOR] |
| Copyright of Biomass & Bioenergy is the property of Pergamon Press - An Imprint of Elsevier Science and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
Be the first to leave a comment!
