View in EDS

Research on the suitability assessment and geo-precision zoning of geological disasters in Shaanxi Province based on InSAR.

Saved in:
Bibliographic Details
Title: Research on the suitability assessment and geo-precision zoning of geological disasters in Shaanxi Province based on InSAR.
Authors: Li, Jingtao1 (AUTHOR) ljt@chd.edu.cn, Zhang, Jing1 (AUTHOR) racheljing@chd.edu.cn, Zhang, Shuangcheng1 (AUTHOR) shuangcheng369@chd.edu.cn, Liu, Ning1 (AUTHOR) ningliu@chd.edu.cn, Gao, Shuai2 (AUTHOR) 376444591@qq.com, Li, Zhen3 (AUTHOR) 1557250520@qq.com, Feng, Zhijie1 (AUTHOR) 2024026018@chd.edu.cn, Li, Sijiezi1 (AUTHOR) jiezi210@chd.edu.cn
Source: Advances in Space Research. Jul2026, Vol. 78 Issue 2, p830-849. 20p.
Subjects: Radar interferometry, Landforms, Natural disasters, Provinces
Geographic Terms: Shaanxi Sheng (China)
Abstract: • A maximum detectable deformation gradient calculation method (MDDG) based on continuous incident angleinterpolation mapping is proposed. • A geo-boundary method based on elevation variation coefficient, geologicallithology, InSAR suitability and elevation factor is constructed. • The applicability evaluation results of InSAR in Shaanxi Province of China are obtained for the first time. • The systematic deviation of MDDG and the detection ability of far and near ends under different incident angles of Sentinel-1 images are revealed. At present, synthetic aperture radar interferometry (InSAR) has become the main means of geological disaster monitoring, but it will produce different degrees of geometric distortion in provincial monitoring. InSAR suitability evaluation is of great significance to its observation quality. Taking Shaanxi Province as an example, this paper proposes a maximum detectable deformation gradient (MDDG) calculation method based on continuous incident angle, carries out InSAR suitability evaluation, and obtains four types of suitability results: high, medium, low, and very low with a resolution of 90 m. At the same time, a geographical boundary method based on elevation variation coefficient, geological lithology, InSAR suitability, and elevation factor is constructed. The results show that: (1) Affected by the surface type, the response degree of different regions in Shaanxi Province to InSAR suitability is significantly different. The proportion of high, medium, low and very low suitability is 27.1%, 13.3%, 13.5% and 46.1% respectively; (2) The three types of geomorphic units in Shaanxi Province are distinct, and the vicinity of the 0.5 isoline is the macro-tectonic-geomorphological boundary between the Guanzhong Basin and the surrounding plateau/mountain. The northern boundary is bounded by the transitional belt area composed of Weibei loess tableland and Beishan mountain system, and the southern boundary is bounded by the northern foot fault zone of Qinling Mountains; (3) The continuous incidence angle interpolation mapping method has higher spatial continuity and significant systematic differences between different incidence angles. In each IW strip, the detection ability gradually decreases from the near end to the far end, and the MDDG system decreases by 13.1%, and the rate of change per degree is about 1.302% / °. This method can provide a certain reference value and paradigm for provincial InSAR suitability assessment and geo-precision zoning. [ABSTRACT FROM AUTHOR]
Copyright of Advances in Space Research is the property of Pergamon Press - An Imprint of Elsevier Science and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 194701154
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Research on the suitability assessment and geo-precision zoning of geological disasters in Shaanxi Province based on InSAR.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Li%2C+Jingtao%22">Li, Jingtao</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> ljt@chd.edu.cn</i><br /><searchLink fieldCode="AR" term="%22Zhang%2C+Jing%22">Zhang, Jing</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> racheljing@chd.edu.cn</i><br /><searchLink fieldCode="AR" term="%22Zhang%2C+Shuangcheng%22">Zhang, Shuangcheng</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> shuangcheng369@chd.edu.cn</i><br /><searchLink fieldCode="AR" term="%22Liu%2C+Ning%22">Liu, Ning</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> ningliu@chd.edu.cn</i><br /><searchLink fieldCode="AR" term="%22Gao%2C+Shuai%22">Gao, Shuai</searchLink><relatesTo>2</relatesTo> (AUTHOR)<i> 376444591@qq.com</i><br /><searchLink fieldCode="AR" term="%22Li%2C+Zhen%22">Li, Zhen</searchLink><relatesTo>3</relatesTo> (AUTHOR)<i> 1557250520@qq.com</i><br /><searchLink fieldCode="AR" term="%22Feng%2C+Zhijie%22">Feng, Zhijie</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> 2024026018@chd.edu.cn</i><br /><searchLink fieldCode="AR" term="%22Li%2C+Sijiezi%22">Li, Sijiezi</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> jiezi210@chd.edu.cn</i>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22Advances+in+Space+Research%22">Advances in Space Research</searchLink>. Jul2026, Vol. 78 Issue 2, p830-849. 20p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Radar+interferometry%22">Radar interferometry</searchLink><br /><searchLink fieldCode="DE" term="%22Landforms%22">Landforms</searchLink><br /><searchLink fieldCode="DE" term="%22Natural+disasters%22">Natural disasters</searchLink><br /><searchLink fieldCode="DE" term="%22Provinces%22">Provinces</searchLink>
– Name: SubjectGeographic
  Label: Geographic Terms
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Shaanxi+Sheng+%28China%29%22">Shaanxi Sheng (China)</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: • A maximum detectable deformation gradient calculation method (MDDG) based on continuous incident angleinterpolation mapping is proposed. • A geo-boundary method based on elevation variation coefficient, geologicallithology, InSAR suitability and elevation factor is constructed. • The applicability evaluation results of InSAR in Shaanxi Province of China are obtained for the first time. • The systematic deviation of MDDG and the detection ability of far and near ends under different incident angles of Sentinel-1 images are revealed. At present, synthetic aperture radar interferometry (InSAR) has become the main means of geological disaster monitoring, but it will produce different degrees of geometric distortion in provincial monitoring. InSAR suitability evaluation is of great significance to its observation quality. Taking Shaanxi Province as an example, this paper proposes a maximum detectable deformation gradient (MDDG) calculation method based on continuous incident angle, carries out InSAR suitability evaluation, and obtains four types of suitability results: high, medium, low, and very low with a resolution of 90 m. At the same time, a geographical boundary method based on elevation variation coefficient, geological lithology, InSAR suitability, and elevation factor is constructed. The results show that: (1) Affected by the surface type, the response degree of different regions in Shaanxi Province to InSAR suitability is significantly different. The proportion of high, medium, low and very low suitability is 27.1%, 13.3%, 13.5% and 46.1% respectively; (2) The three types of geomorphic units in Shaanxi Province are distinct, and the vicinity of the 0.5 isoline is the macro-tectonic-geomorphological boundary between the Guanzhong Basin and the surrounding plateau/mountain. The northern boundary is bounded by the transitional belt area composed of Weibei loess tableland and Beishan mountain system, and the southern boundary is bounded by the northern foot fault zone of Qinling Mountains; (3) The continuous incidence angle interpolation mapping method has higher spatial continuity and significant systematic differences between different incidence angles. In each IW strip, the detection ability gradually decreases from the near end to the far end, and the MDDG system decreases by 13.1%, and the rate of change per degree is about 1.302% / °. This method can provide a certain reference value and paradigm for provincial InSAR suitability assessment and geo-precision zoning. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of Advances in Space Research is the property of Pergamon Press - An Imprint of Elsevier Science and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=194701154
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1016/j.asr.2026.04.082
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 20
        StartPage: 830
    Subjects:
      – SubjectFull: Radar interferometry
        Type: general
      – SubjectFull: Landforms
        Type: general
      – SubjectFull: Natural disasters
        Type: general
      – SubjectFull: Provinces
        Type: general
      – SubjectFull: Shaanxi Sheng (China)
        Type: general
    Titles:
      – TitleFull: Research on the suitability assessment and geo-precision zoning of geological disasters in Shaanxi Province based on InSAR.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Li, Jingtao
      – PersonEntity:
          Name:
            NameFull: Zhang, Jing
      – PersonEntity:
          Name:
            NameFull: Zhang, Shuangcheng
      – PersonEntity:
          Name:
            NameFull: Liu, Ning
      – PersonEntity:
          Name:
            NameFull: Gao, Shuai
      – PersonEntity:
          Name:
            NameFull: Li, Zhen
      – PersonEntity:
          Name:
            NameFull: Feng, Zhijie
      – PersonEntity:
          Name:
            NameFull: Li, Sijiezi
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 15
              M: 07
              Text: Jul2026
              Type: published
              Y: 2026
          Identifiers:
            – Type: issn-print
              Value: 02731177
          Numbering:
            – Type: volume
              Value: 78
            – Type: issue
              Value: 2
          Titles:
            – TitleFull: Advances in Space Research
              Type: main
ResultId 1