View in EDS

Evaluation of Degradable Mg‐Alloy Implants for Femoral Neck Fractures: Subject‐Specific Finite Element Analysis Integrated With Bone Remodelling.

Saved in:
Bibliographic Details
Title: Evaluation of Degradable Mg‐Alloy Implants for Femoral Neck Fractures: Subject‐Specific Finite Element Analysis Integrated With Bone Remodelling.
Authors: Mahapatra, Biswajit1 (AUTHOR), Pal, Bidyut1 (AUTHOR) bidyutpal@mech.iiests.ac.in
Source: International Journal for Numerical Methods in Biomedical Engineering. Jun2026, Vol. 42 Issue 6, p1-14. 14p.
Subjects: Femoral neck fractures, Bioabsorbable implants, Biomechanics, Finite element method, Bone remodeling, Stress concentration, Titanium alloys
Abstract: Stable internal fracture fixation is essential for femoral neck fractures to achieve better healing and minimise post‐operative (PO) complications. Though conventional Ti‐alloy used in implant materials provides adequate strength, it induces high strain shielding and also requires secondary removal surgery. In contrast, biodegradable magnesium alloys demonstrate better biocompatibility and are emerging as promising alternatives for implant applications. To evaluate the biomechanical behaviour of femoral neck fractures (Pauwels Types I–III) in a subject‐specific femoral model treated with the femoral neck system (FNS) made from Ti‐alloy and time‐dependent biodegradable Mg alloy. A femoral model was reconstructed from the CT‐scan data of a healthy adult male and Pauwels Types I–III fracture patterns were subsequently generated. Finite element simulations were conducted under both normal walking and stair‐climbing load conditions. Ti‐alloy properties were constant, while Mg‐alloy modulus was updated daily over 1 year using an exponential degradation model. Bone remodelling was simulated using a strain energy‐based algorithm. Strain shielding at the equilibrium state decreased by as much as 45.55% in the Mg‐alloy implant model compared with its immediate PO condition and a similar decrease of around 11.44% was observed in the Ti‐alloyed model. The cut‐out risk after reaching the equilibrium (AE) condition was reduced by up to 6.74% for the Mg‐alloy case compared to the PO scenario. Mg‐alloy implants demonstrated greater bone apposition (up to 1.13 g/cm3) compared to the Ti‐alloyed implant in AE conditions. Micromotion remained below 150 μm in all models and decreased by approximately 24% after reaching equilibrium. Mg‐alloy FNS implants enhance physiological load transfer, reduce shielding and maintain fixation stability during degradation, indicating strong potential as biodegradable alternatives to Ti‐alloy implants for femoral neck fracture fixation. [ABSTRACT FROM AUTHOR]
Copyright of International Journal for Numerical Methods in Biomedical Engineering is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 194811028
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Evaluation of Degradable Mg‐Alloy Implants for Femoral Neck Fractures: Subject‐Specific Finite Element Analysis Integrated With Bone Remodelling.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Mahapatra%2C+Biswajit%22">Mahapatra, Biswajit</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Pal%2C+Bidyut%22">Pal, Bidyut</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> bidyutpal@mech.iiests.ac.in</i>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22International+Journal+for+Numerical+Methods+in+Biomedical+Engineering%22">International Journal for Numerical Methods in Biomedical Engineering</searchLink>. Jun2026, Vol. 42 Issue 6, p1-14. 14p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Femoral+neck+fractures%22">Femoral neck fractures</searchLink><br /><searchLink fieldCode="DE" term="%22Bioabsorbable+implants%22">Bioabsorbable implants</searchLink><br /><searchLink fieldCode="DE" term="%22Biomechanics%22">Biomechanics</searchLink><br /><searchLink fieldCode="DE" term="%22Finite+element+method%22">Finite element method</searchLink><br /><searchLink fieldCode="DE" term="%22Bone+remodeling%22">Bone remodeling</searchLink><br /><searchLink fieldCode="DE" term="%22Stress+concentration%22">Stress concentration</searchLink><br /><searchLink fieldCode="DE" term="%22Titanium+alloys%22">Titanium alloys</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: Stable internal fracture fixation is essential for femoral neck fractures to achieve better healing and minimise post‐operative (PO) complications. Though conventional Ti‐alloy used in implant materials provides adequate strength, it induces high strain shielding and also requires secondary removal surgery. In contrast, biodegradable magnesium alloys demonstrate better biocompatibility and are emerging as promising alternatives for implant applications. To evaluate the biomechanical behaviour of femoral neck fractures (Pauwels Types I–III) in a subject‐specific femoral model treated with the femoral neck system (FNS) made from Ti‐alloy and time‐dependent biodegradable Mg alloy. A femoral model was reconstructed from the CT‐scan data of a healthy adult male and Pauwels Types I–III fracture patterns were subsequently generated. Finite element simulations were conducted under both normal walking and stair‐climbing load conditions. Ti‐alloy properties were constant, while Mg‐alloy modulus was updated daily over 1 year using an exponential degradation model. Bone remodelling was simulated using a strain energy‐based algorithm. Strain shielding at the equilibrium state decreased by as much as 45.55% in the Mg‐alloy implant model compared with its immediate PO condition and a similar decrease of around 11.44% was observed in the Ti‐alloyed model. The cut‐out risk after reaching the equilibrium (AE) condition was reduced by up to 6.74% for the Mg‐alloy case compared to the PO scenario. Mg‐alloy implants demonstrated greater bone apposition (up to 1.13 g/cm3) compared to the Ti‐alloyed implant in AE conditions. Micromotion remained below 150 μm in all models and decreased by approximately 24% after reaching equilibrium. Mg‐alloy FNS implants enhance physiological load transfer, reduce shielding and maintain fixation stability during degradation, indicating strong potential as biodegradable alternatives to Ti‐alloy implants for femoral neck fracture fixation. [ABSTRACT FROM AUTHOR]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of International Journal for Numerical Methods in Biomedical Engineering is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=194811028
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1002/cnm.70191
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 14
        StartPage: 1
    Subjects:
      – SubjectFull: Femoral neck fractures
        Type: general
      – SubjectFull: Bioabsorbable implants
        Type: general
      – SubjectFull: Biomechanics
        Type: general
      – SubjectFull: Finite element method
        Type: general
      – SubjectFull: Bone remodeling
        Type: general
      – SubjectFull: Stress concentration
        Type: general
      – SubjectFull: Titanium alloys
        Type: general
    Titles:
      – TitleFull: Evaluation of Degradable Mg‐Alloy Implants for Femoral Neck Fractures: Subject‐Specific Finite Element Analysis Integrated With Bone Remodelling.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Mahapatra, Biswajit
      – PersonEntity:
          Name:
            NameFull: Pal, Bidyut
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 06
              Text: Jun2026
              Type: published
              Y: 2026
          Identifiers:
            – Type: issn-print
              Value: 20407939
          Numbering:
            – Type: volume
              Value: 42
            – Type: issue
              Value: 6
          Titles:
            – TitleFull: International Journal for Numerical Methods in Biomedical Engineering
              Type: main
ResultId 1