Influence of phase composition and particle size of atomised Ni–Al alloy samples on the catalytic performance of Raney-type nickel catalysts
Saved in:
| Title: | Influence of phase composition and particle size of atomised Ni–Al alloy samples on the catalytic performance of Raney-type nickel catalysts |
|---|---|
| Authors: | Devred, F.1 fdevred@yahoo.fr, Gieske, A.H.1, Adkins, N.2, Dahlborg, U.3, Bao, C.M.3, Calvo-Dahlborg, M.3, Bakker, J.W.1, Nieuwenhuys, B.E.1,4 |
| Source: | Applied Catalysis A: General. Mar2009, Vol. 356 Issue 2, p154-161. 8p. |
| Subjects: | Nickel-aluminum alloys, Nickel catalysts, Catalysis, Hydrogenation, Atomization, X-ray photoelectron spectroscopy, Inductively coupled plasma atomic emission spectrometry |
| Abstract: | Abstract: Hydrogenation of citral has been investigated over Raney-type nickel catalysts prepared from various Ni–Al atomised alloys. These alloys differ in phase composition; in particular in the NiAl3 concentration. The starting alloys were prepared by gas atomisation or cast and crush process and subsequently activated by a conventional leaching process. The aim was to investigate the influence of the phase composition and the effect of the initial particle size of the alloys on the catalytic performance. It appears that the composition of the initial alloy plays an important role in the catalytic performance of the activated catalysts: catalysts prepared from atomised alloys that contain a higher volume fraction of NiAl3 in comparison to the standard 50–50wt% (Ni–68.5at.% Al) alloy exhibit higher activity. X-ray photoelectron spectroscopy (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES) and BET measurements were used for surface analysis, bulk analysis and determination of the surface area, respectively. It is proposed that the amount of remaining metallic aluminium after activation influences the catalytic properties. As the concentration of aluminium in the activated catalysts is essentially the same at the near surface, the microstructure of the catalyst, with different concentrations of Al in the bulk may be the origin of the differences in catalytic performance. Advantages of the atomisation process over the traditional cast and crush process are demonstrated. [Copyright &y& Elsevier] |
| Copyright of Applied Catalysis A: General is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
Be the first to leave a comment!
