Axial dispersion in metal foams and streamwise-periodic porous media
Saved in:
| Title: | Axial dispersion in metal foams and streamwise-periodic porous media |
|---|---|
| Authors: | Hutter, C.1, Zenklusen, A.1, Lang, R.2, Rudolf von Rohr, Ph.1 vonrohr@ipe.mavt.ethz.ch |
| Source: | Chemical Engineering Science. Mar2011, Vol. 66 Issue 6, p1132-1141. 10p. |
| Subjects: | Metal foams, Dispersion (Chemistry), Porous materials, Sintering, Chemical reactors, Catalysts, Pressure |
| Abstract: | Abstract: We present a study on the axial dispersion in metal foams and laser sintered reactors. Commercially available metal foams of 20 and 30ppi are compared to a designed streamwise-periodic structure in terms of axial dispersion coefficients and pressure drops. Therefore tracer pulse experiments were performed and post processed by means of a deconvolution method. The Peclet number Pe p based on the pore size is ranging from to which is attributed to the increased velocities due to the high porosity of the material compared to fixed bed reactors. The attained dispersion coefficients ranging from to demonstrate the trend of packed beds and common packing materials and increase monotone with the Peclet number Pe p . The pressure drop versus the interstitial bulk velocity follows the Forchheimer equation and can be described by the conventional Ergun model for all investigated porous media. The parameters obtained correspond to values found in literature. The results of this study show the high potential of foam reactors for catalyst driven reactions. They provide the same or even a higher surface area per volume of catalyst bed while inducing a much smaller pressure drop than corresponding fixed beds. [Copyright &y& Elsevier] |
| Copyright of Chemical Engineering Science is the property of Pergamon Press - An Imprint of Elsevier Science and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
Be the first to leave a comment!
