Transformaciones microestructurales por efecto del calor en una unión disímil de acero 17-4 PH y Hastelloy C-276.
Saved in:
| Title: | Transformaciones microestructurales por efecto del calor en una unión disímil de acero 17-4 PH y Hastelloy C-276. |
|---|---|
| Alternate Title: | Microstructural transformations by heat effect in a dissimilar joint of 17-4PH steel and Hastelloy C-267 superalloy. |
| Authors: | Fernández-Columbié, Tomás H.1 tfernandez@ismm.edu.cu, Gómez-Fernández, Maikel2, Lamorú-Urgellés, Marbelis1, Romero-Góngora, Walter1, Hernández-Verdecia, Maikel1 |
| Source: | Minería y Geología. ene-mar2020, Vol. 36 Issue 1, p81-91. 11p. |
| Subject Terms: | *Dissimilar welding, *Heat resistant alloys, *Precipitation hardening, *Welding, *Martensite |
| Abstract (English): | The heat effect produced by the welding on the microstructural variations of a dissimilar joint of precipitation hardening, 17-4 PH (type AISI 630) and the B 574 (Hastelloy C-276) was analyzed. To determine this effect, the electrode E NiCrMo-4 with a diameter of 3.2 mm was used, the deposit was made in joints prepared with bevels of 60o in "V" and butted, welded by only one side of the material. After the welding process the thermal influence area, the interface, and the molten zone were microstructurally characterized. From the effect of the supplied heat, the presence in the microstructure of austenitic associated to the austenite of lath or dendrite morphology was determined, as well as the presence of austenite Widmanstätten and precipitation of secondary austenite inside the martensite. [ABSTRACT FROM AUTHOR] |
| Abstract (Spanish): | Se analizó el efecto del calor producto de la soldadura en las variaciones microestructurales de una unión disímil de acero endurecible por precipitación, del tipo 17-4 PH (AISI 630) y la superaleación Hastelloy C-276 (B 574). Para determinar dicho efecto se empleó el electrodo E NiCrMo-4 con diámetro de 3,2 mm; el depósito se realizó en uniones preparadas con biseles de 60o en "V" y a tope, soldados por un solo lado del material. Se caracterizó microestructuralmente la zona fundida, la zona de influencia térmica y la interfase, luego de realizado el proceso de soldadura. Se determina que por el efecto del calor aportado se obtiene, en la microestructura, la presencia de la austenítica unida a la austenita de morfología tipo dendrítico o de listoncillos, así como la presencia de austenita Widmanstätten y precipitación de austenita secundaria en el interior de la martensita. [ABSTRACT FROM AUTHOR] |
| Database: | Energy & Power Source |
| FullText | Links: – Type: pdflink Text: Availability: 0 |
|---|---|
| Header | DbId: enr DbLabel: Energy & Power Source An: 143372680 AccessLevel: 6 PubType: Academic Journal PubTypeId: academicJournal PreciseRelevancyScore: 0 |
| IllustrationInfo | |
| Items | – Name: Title Label: Title Group: Ti Data: Transformaciones microestructurales por efecto del calor en una unión disímil de acero 17-4 PH y Hastelloy C-276. – Name: TitleAlt Label: Alternate Title Group: TiAlt Data: Microstructural transformations by heat effect in a dissimilar joint of 17-4PH steel and Hastelloy C-267 superalloy. – Name: Author Label: Authors Group: Au Data: <searchLink fieldCode="AR" term="%22Fernández-Columbié%2C+Tomás+H%2E%22">Fernández-Columbié, Tomás H.</searchLink><relatesTo>1</relatesTo><i> tfernandez@ismm.edu.cu</i><br /><searchLink fieldCode="AR" term="%22Gómez-Fernández%2C+Maikel%22">Gómez-Fernández, Maikel</searchLink><relatesTo>2</relatesTo><br /><searchLink fieldCode="AR" term="%22Lamorú-Urgellés%2C+Marbelis%22">Lamorú-Urgellés, Marbelis</searchLink><relatesTo>1</relatesTo><br /><searchLink fieldCode="AR" term="%22Romero-Góngora%2C+Walter%22">Romero-Góngora, Walter</searchLink><relatesTo>1</relatesTo><br /><searchLink fieldCode="AR" term="%22Hernández-Verdecia%2C+Maikel%22">Hernández-Verdecia, Maikel</searchLink><relatesTo>1</relatesTo> – Name: TitleSource Label: Source Group: Src Data: <searchLink fieldCode="JN" term="%22Minería+y+Geología%22">Minería y Geología</searchLink>. ene-mar2020, Vol. 36 Issue 1, p81-91. 11p. – Name: Subject Label: Subject Terms Group: Su Data: *<searchLink fieldCode="DE" term="%22Dissimilar+welding%22">Dissimilar welding</searchLink><br />*<searchLink fieldCode="DE" term="%22Heat+resistant+alloys%22">Heat resistant alloys</searchLink><br />*<searchLink fieldCode="DE" term="%22Precipitation+hardening%22">Precipitation hardening</searchLink><br />*<searchLink fieldCode="DE" term="%22Welding%22">Welding</searchLink><br />*<searchLink fieldCode="DE" term="%22Martensite%22">Martensite</searchLink> – Name: Abstract Label: Abstract (English) Group: Ab Data: The heat effect produced by the welding on the microstructural variations of a dissimilar joint of precipitation hardening, 17-4 PH (type AISI 630) and the B 574 (Hastelloy C-276) was analyzed. To determine this effect, the electrode E NiCrMo-4 with a diameter of 3.2 mm was used, the deposit was made in joints prepared with bevels of 60o in "V" and butted, welded by only one side of the material. After the welding process the thermal influence area, the interface, and the molten zone were microstructurally characterized. From the effect of the supplied heat, the presence in the microstructure of austenitic associated to the austenite of lath or dendrite morphology was determined, as well as the presence of austenite Widmanstätten and precipitation of secondary austenite inside the martensite. [ABSTRACT FROM AUTHOR] – Name: Abstract Label: Abstract (Spanish) Group: Ab Data: Se analizó el efecto del calor producto de la soldadura en las variaciones microestructurales de una unión disímil de acero endurecible por precipitación, del tipo 17-4 PH (AISI 630) y la superaleación Hastelloy C-276 (B 574). Para determinar dicho efecto se empleó el electrodo E NiCrMo-4 con diámetro de 3,2 mm; el depósito se realizó en uniones preparadas con biseles de 60o en "V" y a tope, soldados por un solo lado del material. Se caracterizó microestructuralmente la zona fundida, la zona de influencia térmica y la interfase, luego de realizado el proceso de soldadura. Se determina que por el efecto del calor aportado se obtiene, en la microestructura, la presencia de la austenítica unida a la austenita de morfología tipo dendrítico o de listoncillos, así como la presencia de austenita Widmanstätten y precipitación de austenita secundaria en el interior de la martensita. [ABSTRACT FROM AUTHOR] |
| PLink | https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=enr&AN=143372680 |
| RecordInfo | BibRecord: BibEntity: Languages: – Code: spa Text: Spanish PhysicalDescription: Pagination: PageCount: 11 StartPage: 81 Subjects: – SubjectFull: Dissimilar welding Type: general – SubjectFull: Heat resistant alloys Type: general – SubjectFull: Precipitation hardening Type: general – SubjectFull: Welding Type: general – SubjectFull: Martensite Type: general Titles: – TitleFull: Transformaciones microestructurales por efecto del calor en una unión disímil de acero 17-4 PH y Hastelloy C-276. Type: main BibRelationships: HasContributorRelationships: – PersonEntity: Name: NameFull: Fernández-Columbié, Tomás H. – PersonEntity: Name: NameFull: Gómez-Fernández, Maikel – PersonEntity: Name: NameFull: Lamorú-Urgellés, Marbelis – PersonEntity: Name: NameFull: Romero-Góngora, Walter – PersonEntity: Name: NameFull: Hernández-Verdecia, Maikel IsPartOfRelationships: – BibEntity: Dates: – D: 01 M: 01 Text: ene-mar2020 Type: published Y: 2020 Identifiers: – Type: issn-print Value: 02585979 Numbering: – Type: volume Value: 36 – Type: issue Value: 1 Titles: – TitleFull: Minería y Geología Type: main |
| ResultId | 1 |
