Multi-Objective Optimization on Enhanced Heat Transfer and Pumping Power of Cooling Plate-Based Indirect Cooling System for 6S2P Lithium-Ion Battery Module.
Saved in:
| Title: | Multi-Objective Optimization on Enhanced Heat Transfer and Pumping Power of Cooling Plate-Based Indirect Cooling System for 6S2P Lithium-Ion Battery Module. |
|---|---|
| Authors: | Park, Jin-Hyeok1 (AUTHOR), Le, Tai Duc1 (AUTHOR), Lee, Moo-Yeon (AUTHOR) mylee@dau.ac.kr |
| Source: | Energies (19961073). May2026, Vol. 19 Issue 9, p2218. 37p. |
| Subject Terms: | *Multi-objective optimization, *Heat transfer, *Electric pumps, *Heat exchangers, *Artificial neural networks, *Lithium-ion batteries, *Computational fluid dynamics, *Cooling systems |
| Abstract: | This study proposes a multi-objective optimization framework for a cooling plate-based indirect liquid cooling system applied to a 6S2P lithium-ion battery module during 3C fast charging. A three-dimensional computational fluid dynamics (CFD) model coupled with the multi-scale multi-domain (MSMD)–Newman–Tiedemann–Gu–Kim (NTGK) battery heat generation model was developed to investigate the system thermal–hydraulic behavior. The numerical model was experimentally validated through single-cell charging tests, with temperature deviations below 5%, confirming its reliability. A systematic parametric analysis was conducted to evaluate the effects of coolant channel number, channel width, channel spacing, and coolant mass flow rate on maximum temperature (Tmax), temperature difference (ΔT), and pressure drop (ΔP). The results indicated that increasing the coolant flow rate significantly enhanced thermal performance but caused a substantial increase in hydraulic losses, whereas geometric parameters had comparatively smaller effects. To improve optimization efficiency, 30 design samples were generated using Latin hypercube sampling and used to train ANN surrogate models, which demonstrated high predictive accuracy with test R2 values of 0.9931, 0.9960, and 0.9842 for Tmax, ΔT, and pumping power (Ppump), respectively. Subsequently, NSGA-II combined with TOPSIS identified the optimal design with a channel width of 6.22 mm, channel spacing of 4.84 mm, and coolant flow rate of 2.55 LPM. Under these conditions, the optimized system achieved a Tmax of 30.47 °C, a ΔT of 4.50 °C, and a Ppump of 0.05879 W. The relative deviations between ANN predictions and CFD results were all below 1%, demonstrating the robustness of the proposed optimization framework. These findings provide an effective design methodology for enhancing heat transfer while minimizing pumping power in advanced battery thermal management systems. [ABSTRACT FROM AUTHOR] |
| Database: | Energy & Power Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| FullText | Links: – Type: pdflink Text: Availability: 1 |
|---|---|
| Header | DbId: enr DbLabel: Energy & Power Source An: 193716114 AccessLevel: 6 PubType: Academic Journal PubTypeId: academicJournal PreciseRelevancyScore: 0 |
| IllustrationInfo | |
| Items | – Name: Title Label: Title Group: Ti Data: Multi-Objective Optimization on Enhanced Heat Transfer and Pumping Power of Cooling Plate-Based Indirect Cooling System for 6S2P Lithium-Ion Battery Module. – Name: Author Label: Authors Group: Au Data: <searchLink fieldCode="AR" term="%22Park%2C+Jin-Hyeok%22">Park, Jin-Hyeok</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Le%2C+Tai+Duc%22">Le, Tai Duc</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Lee%2C+Moo-Yeon%22">Lee, Moo-Yeon</searchLink> (AUTHOR)<i> mylee@dau.ac.kr</i> – Name: TitleSource Label: Source Group: Src Data: <searchLink fieldCode="JN" term="%22Energies+%2819961073%29%22">Energies (19961073)</searchLink>. May2026, Vol. 19 Issue 9, p2218. 37p. – Name: Subject Label: Subject Terms Group: Su Data: *<searchLink fieldCode="DE" term="%22Multi-objective+optimization%22">Multi-objective optimization</searchLink><br />*<searchLink fieldCode="DE" term="%22Heat+transfer%22">Heat transfer</searchLink><br />*<searchLink fieldCode="DE" term="%22Electric+pumps%22">Electric pumps</searchLink><br />*<searchLink fieldCode="DE" term="%22Heat+exchangers%22">Heat exchangers</searchLink><br />*<searchLink fieldCode="DE" term="%22Artificial+neural+networks%22">Artificial neural networks</searchLink><br />*<searchLink fieldCode="DE" term="%22Lithium-ion+batteries%22">Lithium-ion batteries</searchLink><br />*<searchLink fieldCode="DE" term="%22Computational+fluid+dynamics%22">Computational fluid dynamics</searchLink><br />*<searchLink fieldCode="DE" term="%22Cooling+systems%22">Cooling systems</searchLink> – Name: Abstract Label: Abstract Group: Ab Data: This study proposes a multi-objective optimization framework for a cooling plate-based indirect liquid cooling system applied to a 6S2P lithium-ion battery module during 3C fast charging. A three-dimensional computational fluid dynamics (CFD) model coupled with the multi-scale multi-domain (MSMD)–Newman–Tiedemann–Gu–Kim (NTGK) battery heat generation model was developed to investigate the system thermal–hydraulic behavior. The numerical model was experimentally validated through single-cell charging tests, with temperature deviations below 5%, confirming its reliability. A systematic parametric analysis was conducted to evaluate the effects of coolant channel number, channel width, channel spacing, and coolant mass flow rate on maximum temperature (Tmax), temperature difference (ΔT), and pressure drop (ΔP). The results indicated that increasing the coolant flow rate significantly enhanced thermal performance but caused a substantial increase in hydraulic losses, whereas geometric parameters had comparatively smaller effects. To improve optimization efficiency, 30 design samples were generated using Latin hypercube sampling and used to train ANN surrogate models, which demonstrated high predictive accuracy with test R2 values of 0.9931, 0.9960, and 0.9842 for Tmax, ΔT, and pumping power (Ppump), respectively. Subsequently, NSGA-II combined with TOPSIS identified the optimal design with a channel width of 6.22 mm, channel spacing of 4.84 mm, and coolant flow rate of 2.55 LPM. Under these conditions, the optimized system achieved a Tmax of 30.47 °C, a ΔT of 4.50 °C, and a Ppump of 0.05879 W. The relative deviations between ANN predictions and CFD results were all below 1%, demonstrating the robustness of the proposed optimization framework. These findings provide an effective design methodology for enhancing heat transfer while minimizing pumping power in advanced battery thermal management systems. [ABSTRACT FROM AUTHOR] |
| PLink | https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=enr&AN=193716114 |
| RecordInfo | BibRecord: BibEntity: Identifiers: – Type: doi Value: 10.3390/en19092218 Languages: – Code: eng Text: English PhysicalDescription: Pagination: PageCount: 37 StartPage: 2218 Subjects: – SubjectFull: Multi-objective optimization Type: general – SubjectFull: Heat transfer Type: general – SubjectFull: Electric pumps Type: general – SubjectFull: Heat exchangers Type: general – SubjectFull: Artificial neural networks Type: general – SubjectFull: Lithium-ion batteries Type: general – SubjectFull: Computational fluid dynamics Type: general – SubjectFull: Cooling systems Type: general Titles: – TitleFull: Multi-Objective Optimization on Enhanced Heat Transfer and Pumping Power of Cooling Plate-Based Indirect Cooling System for 6S2P Lithium-Ion Battery Module. Type: main BibRelationships: HasContributorRelationships: – PersonEntity: Name: NameFull: Park, Jin-Hyeok – PersonEntity: Name: NameFull: Le, Tai Duc – PersonEntity: Name: NameFull: Lee, Moo-Yeon IsPartOfRelationships: – BibEntity: Dates: – D: 01 M: 05 Text: May2026 Type: published Y: 2026 Identifiers: – Type: issn-print Value: 19961073 Numbering: – Type: volume Value: 19 – Type: issue Value: 9 Titles: – TitleFull: Energies (19961073) Type: main |
| ResultId | 1 |
