A Study on the Dynamic Response of a Small Wind Turbine Blade.
Saved in:
| Title: | A Study on the Dynamic Response of a Small Wind Turbine Blade. |
|---|---|
| Authors: | Bao, Daorina1 (AUTHOR), Luo, Shenao1,2 (AUTHOR), Jiang, Aoxiang2,3 (AUTHOR), Luo, Yongshui3,4 (AUTHOR), Chen, Jingsen4,5 (AUTHOR), Guo, Xiaodong1,5 (AUTHOR) guoxiaodong@sztu.edu.cn, Cui, Ruijun1,2 (AUTHOR) |
| Source: | Energies (19961073). May2026, Vol. 19 Issue 10, p2386. 23p. |
| Subject Terms: | *Wind turbine blades, *Structural reliability, *Field research, *Computer simulation, *Unsteady flow, *Wind turbines, *Angle of attack (Aerodynamics) |
| Abstract: | Turbulent wind conditions pose significant challenges to the blade structural reliability of small wind turbines. Different from the authors' previous work, which mainly focused on the output characteristics of the same 5 kW prototype under variable inflow conditions, this study combines field-test observations with numerical simulations to further investigate the blade structural dynamic responses of a 5 kW variable-pitch wind turbine under both uniform inflow and extreme wind conditions. Owing to the unique pitch-regulation mechanism of the proposed turbine, two pitch-control modes, namely conventional power-limited pitch control and active stall pitch control, are comparatively analyzed to clarify their effects on blade load, stress, and displacement responses. The results indicate that, under uniform inflow conditions, stresses are concentrated near the leading edge of the blade mid-span, while the maximum displacement occurs at the blade tip. Both stress and displacement decrease with increasing conventional pitch angle. Under extreme wind conditions, increasing gust intensity causes a nonlinear growth in blade loads and aggravates blade structural response. During active stall pitch control, the load distribution pattern is generally consistent with that under conventional pitch control, whereas the blade structural response first decreases and then increases as the pitch angle is adjusted toward negative values. Under uniform inflow at the rated wind speed of 11 m/s, the blade-tip maximum displacement decreased from 56.51 mm under the +6° power-limited/reference pitch condition to 48.42 mm under the −6° active-stall-related pitch condition, corresponding to a reduction of approximately 14.3%. These results provide a useful reference for the blade structural design and control optimization of distributed small wind turbines under complex inflow conditions. [ABSTRACT FROM AUTHOR] |
| Database: | Energy & Power Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
Be the first to leave a comment!
