A Multi-Objective Coati Optimization Approach for Integrated DGs and D-STATCOMs in Active Distribution Networks Under Uncertainty.
Saved in:
| Title: | A Multi-Objective Coati Optimization Approach for Integrated DGs and D-STATCOMs in Active Distribution Networks Under Uncertainty. |
|---|---|
| Authors: | Alzahrani, Thabet M.1 (AUTHOR) ahmed_hatata@su.edu.sa, Hatata, Ahmed Y.1,2 (AUTHOR), El-Saadawi, Magdi M.2,3 (AUTHOR), Kaddah, Sahar S.2,4 (AUTHOR), Abdulhai, Mohamed F.3,4 (AUTHOR) |
| Source: | Energies (19961073). Jun2026, Vol. 19 Issue 11, p2560. 41p. |
| Subject Terms: | *Distributed power generation, *Renewable energy sources, *Power electronics, *Multi-objective optimization, *Power distribution networks, *Electric loss in electric power systems, *Stochastic models |
| Abstract: | The intermittent nature of distributed generators based on renewable energy sources (DGs-RESs), together with the time-varying behavior of load demand, introduces significant uncertainty into the planning and operation of active distribution networks. These uncertainties make the optimal siting and sizing of DGs-RESs and D-STATCOMs a challenging multi-objective optimization problem. This paper proposes a multi-objective Coati Optimization Algorithm (MOCOA) for the coordinated allocation of DGs-RESs and D-STATCOMs in radial distribution networks under uncertainty. The proposed framework aims to minimize total active power losses (TAPLs) and enhance the voltage stability index (VSI) while satisfying the operational constraints of the distribution system. First, the load sensitivity factor (LSF) is employed to identify the most suitable candidate buses, thereby reducing the search space and improving the computational efficiency of the optimization process. Then, MOCOA is applied to determine the optimal placement and sizing of DGs-RESs and D-STATCOMs. The uncertainties associated with load demand, solar irradiance, and wind speed are modeled using probabilistic representations, and reduced representative scenarios are considered to evaluate system performance under uncertain operating conditions. The proposed method is validated using modified IEEE 33-bus and IEEE 69-bus radial distribution networks. The simulation results demonstrate that the coordinated integration of DGs-RESs and D-STATCOMs significantly reduces TAPLs, improves the VSI, and enhances the voltage profile. In particular, increasing the number of DG/D-STATCOM units and using wind energy reduces the TAPL by 26.95% and increases the 24 h cumulative VSI from 20.16781 p.u. to 20.4162 p.u. Comparative results with other optimization techniques confirm the effectiveness, robustness, and superior performance of the proposed MOCOA for uncertainty-aware planning of active distribution networks. [ABSTRACT FROM AUTHOR] |
| Database: | Energy & Power Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| FullText | Links: – Type: pdflink Text: Availability: 1 |
|---|---|
| Header | DbId: enr DbLabel: Energy & Power Source An: 194587948 AccessLevel: 6 PubType: Academic Journal PubTypeId: academicJournal PreciseRelevancyScore: 0 |
| IllustrationInfo | |
| Items | – Name: Title Label: Title Group: Ti Data: A Multi-Objective Coati Optimization Approach for Integrated DGs and D-STATCOMs in Active Distribution Networks Under Uncertainty. – Name: Author Label: Authors Group: Au Data: <searchLink fieldCode="AR" term="%22Alzahrani%2C+Thabet+M%2E%22">Alzahrani, Thabet M.</searchLink><relatesTo>1</relatesTo> (AUTHOR)<i> ahmed_hatata@su.edu.sa</i><br /><searchLink fieldCode="AR" term="%22Hatata%2C+Ahmed+Y%2E%22">Hatata, Ahmed Y.</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22El-Saadawi%2C+Magdi+M%2E%22">El-Saadawi, Magdi M.</searchLink><relatesTo>2,3</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Kaddah%2C+Sahar+S%2E%22">Kaddah, Sahar S.</searchLink><relatesTo>2,4</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Abdulhai%2C+Mohamed+F%2E%22">Abdulhai, Mohamed F.</searchLink><relatesTo>3,4</relatesTo> (AUTHOR) – Name: TitleSource Label: Source Group: Src Data: <searchLink fieldCode="JN" term="%22Energies+%2819961073%29%22">Energies (19961073)</searchLink>. Jun2026, Vol. 19 Issue 11, p2560. 41p. – Name: Subject Label: Subject Terms Group: Su Data: *<searchLink fieldCode="DE" term="%22Distributed+power+generation%22">Distributed power generation</searchLink><br />*<searchLink fieldCode="DE" term="%22Renewable+energy+sources%22">Renewable energy sources</searchLink><br />*<searchLink fieldCode="DE" term="%22Power+electronics%22">Power electronics</searchLink><br />*<searchLink fieldCode="DE" term="%22Multi-objective+optimization%22">Multi-objective optimization</searchLink><br />*<searchLink fieldCode="DE" term="%22Power+distribution+networks%22">Power distribution networks</searchLink><br />*<searchLink fieldCode="DE" term="%22Electric+loss+in+electric+power+systems%22">Electric loss in electric power systems</searchLink><br />*<searchLink fieldCode="DE" term="%22Stochastic+models%22">Stochastic models</searchLink> – Name: Abstract Label: Abstract Group: Ab Data: The intermittent nature of distributed generators based on renewable energy sources (DGs-RESs), together with the time-varying behavior of load demand, introduces significant uncertainty into the planning and operation of active distribution networks. These uncertainties make the optimal siting and sizing of DGs-RESs and D-STATCOMs a challenging multi-objective optimization problem. This paper proposes a multi-objective Coati Optimization Algorithm (MOCOA) for the coordinated allocation of DGs-RESs and D-STATCOMs in radial distribution networks under uncertainty. The proposed framework aims to minimize total active power losses (TAPLs) and enhance the voltage stability index (VSI) while satisfying the operational constraints of the distribution system. First, the load sensitivity factor (LSF) is employed to identify the most suitable candidate buses, thereby reducing the search space and improving the computational efficiency of the optimization process. Then, MOCOA is applied to determine the optimal placement and sizing of DGs-RESs and D-STATCOMs. The uncertainties associated with load demand, solar irradiance, and wind speed are modeled using probabilistic representations, and reduced representative scenarios are considered to evaluate system performance under uncertain operating conditions. The proposed method is validated using modified IEEE 33-bus and IEEE 69-bus radial distribution networks. The simulation results demonstrate that the coordinated integration of DGs-RESs and D-STATCOMs significantly reduces TAPLs, improves the VSI, and enhances the voltage profile. In particular, increasing the number of DG/D-STATCOM units and using wind energy reduces the TAPL by 26.95% and increases the 24 h cumulative VSI from 20.16781 p.u. to 20.4162 p.u. Comparative results with other optimization techniques confirm the effectiveness, robustness, and superior performance of the proposed MOCOA for uncertainty-aware planning of active distribution networks. [ABSTRACT FROM AUTHOR] |
| PLink | https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=enr&AN=194587948 |
| RecordInfo | BibRecord: BibEntity: Identifiers: – Type: doi Value: 10.3390/en19112560 Languages: – Code: eng Text: English PhysicalDescription: Pagination: PageCount: 41 StartPage: 2560 Subjects: – SubjectFull: Distributed power generation Type: general – SubjectFull: Renewable energy sources Type: general – SubjectFull: Power electronics Type: general – SubjectFull: Multi-objective optimization Type: general – SubjectFull: Power distribution networks Type: general – SubjectFull: Electric loss in electric power systems Type: general – SubjectFull: Stochastic models Type: general Titles: – TitleFull: A Multi-Objective Coati Optimization Approach for Integrated DGs and D-STATCOMs in Active Distribution Networks Under Uncertainty. Type: main BibRelationships: HasContributorRelationships: – PersonEntity: Name: NameFull: Alzahrani, Thabet M. – PersonEntity: Name: NameFull: Hatata, Ahmed Y. – PersonEntity: Name: NameFull: El-Saadawi, Magdi M. – PersonEntity: Name: NameFull: Kaddah, Sahar S. – PersonEntity: Name: NameFull: Abdulhai, Mohamed F. IsPartOfRelationships: – BibEntity: Dates: – D: 01 M: 06 Text: Jun2026 Type: published Y: 2026 Identifiers: – Type: issn-print Value: 19961073 Numbering: – Type: volume Value: 19 – Type: issue Value: 11 Titles: – TitleFull: Energies (19961073) Type: main |
| ResultId | 1 |