Decoupling Irradiance Gain and Thermal Efficiency Loss in Photovoltaic Tracking Systems Using Explainable Machine Learning.
Saved in:
| Title: | Decoupling Irradiance Gain and Thermal Efficiency Loss in Photovoltaic Tracking Systems Using Explainable Machine Learning. |
|---|---|
| Authors: | Almalki, Naief1 (AUTHOR) |
| Source: | Energies (19961073). Jun2026, Vol. 19 Issue 12, p2766. 18p. |
| Subject Terms: | *Photovoltaic power systems, *Temperature effect, *Boosting algorithms, *Global radiation, *Machine learning, *Energy consumption, *Solar energy, *Shapley Additive Explanations |
| Abstract: | The performance of photovoltaic (PV) generation systems is widely evaluated using physics-based simulation. However, this often provides limited insight into the interaction between the operating parameters that fundamentally govern energy outputs. In response to this limitation, this study presents an explainable machine learning framework that uses a normalized efficiency target to recover physically meaningful sensitivity coefficients directly from system-level data. The presented framework is validated on the System Advisor Model (SAM) simulated dataset for four mounting configurations: fixed-tilt, horizontal single-axis tracking (HSAT), tilted single-axis tracking (TSAT), and dual-axis tracking. The same system design parameters and loss assumptions are retained across all configurations to ensure the difference reflected in the generated dataset is due to the tracking modes. To capture the nonlinear input–output relationships, an XGBoost surrogate model is trained, and SHapley Additive exPlanations (SHAP) are subsequently applied to quantify the global importance of individual parameters. To investigate the interaction between the irradiance gain and temperature-induced efficiency losses at the system level induced by PV tracking, two complementary prediction targets are employed: raw system power output and a normalized efficiency-like metric. The results demonstrate that plane-of-array irradiance dominates PV power generation across all tracking configurations, while module temperature governs variations in normalized performance. Thermal sensitivity analysis under high-irradiance conditions reveals a weakly configuration-dependent slope of approximately −5.63 × 10−4 to −5.85 × 10−4 °C−1 (R2 ≈ 0.99). However, the relative spread among the slopes is only approximately 3.6%, showing that tracking systems increase energy yield primarily through enhanced irradiance capture while the temperature-induced efficiency penalty remains similar in engineering magnitude across configurations. The proposed framework extends the role of machine learning from prediction to physically meaningful interpretation and increased transparency. [ABSTRACT FROM AUTHOR] |
| Database: | Energy & Power Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| FullText | Links: – Type: pdflink Text: Availability: 1 |
|---|---|
| Header | DbId: enr DbLabel: Energy & Power Source An: 194909215 AccessLevel: 6 PubType: Academic Journal PubTypeId: academicJournal PreciseRelevancyScore: 0 |
| IllustrationInfo | |
| Items | – Name: Title Label: Title Group: Ti Data: Decoupling Irradiance Gain and Thermal Efficiency Loss in Photovoltaic Tracking Systems Using Explainable Machine Learning. – Name: Author Label: Authors Group: Au Data: <searchLink fieldCode="AR" term="%22Almalki%2C+Naief%22">Almalki, Naief</searchLink><relatesTo>1</relatesTo> (AUTHOR) – Name: TitleSource Label: Source Group: Src Data: <searchLink fieldCode="JN" term="%22Energies+%2819961073%29%22">Energies (19961073)</searchLink>. Jun2026, Vol. 19 Issue 12, p2766. 18p. – Name: Subject Label: Subject Terms Group: Su Data: *<searchLink fieldCode="DE" term="%22Photovoltaic+power+systems%22">Photovoltaic power systems</searchLink><br />*<searchLink fieldCode="DE" term="%22Temperature+effect%22">Temperature effect</searchLink><br />*<searchLink fieldCode="DE" term="%22Boosting+algorithms%22">Boosting algorithms</searchLink><br />*<searchLink fieldCode="DE" term="%22Global+radiation%22">Global radiation</searchLink><br />*<searchLink fieldCode="DE" term="%22Machine+learning%22">Machine learning</searchLink><br />*<searchLink fieldCode="DE" term="%22Energy+consumption%22">Energy consumption</searchLink><br />*<searchLink fieldCode="DE" term="%22Solar+energy%22">Solar energy</searchLink><br />*<searchLink fieldCode="DE" term="%22Shapley+Additive+Explanations%22">Shapley Additive Explanations</searchLink> – Name: Abstract Label: Abstract Group: Ab Data: The performance of photovoltaic (PV) generation systems is widely evaluated using physics-based simulation. However, this often provides limited insight into the interaction between the operating parameters that fundamentally govern energy outputs. In response to this limitation, this study presents an explainable machine learning framework that uses a normalized efficiency target to recover physically meaningful sensitivity coefficients directly from system-level data. The presented framework is validated on the System Advisor Model (SAM) simulated dataset for four mounting configurations: fixed-tilt, horizontal single-axis tracking (HSAT), tilted single-axis tracking (TSAT), and dual-axis tracking. The same system design parameters and loss assumptions are retained across all configurations to ensure the difference reflected in the generated dataset is due to the tracking modes. To capture the nonlinear input–output relationships, an XGBoost surrogate model is trained, and SHapley Additive exPlanations (SHAP) are subsequently applied to quantify the global importance of individual parameters. To investigate the interaction between the irradiance gain and temperature-induced efficiency losses at the system level induced by PV tracking, two complementary prediction targets are employed: raw system power output and a normalized efficiency-like metric. The results demonstrate that plane-of-array irradiance dominates PV power generation across all tracking configurations, while module temperature governs variations in normalized performance. Thermal sensitivity analysis under high-irradiance conditions reveals a weakly configuration-dependent slope of approximately −5.63 × 10−4 to −5.85 × 10−4 °C−1 (R2 ≈ 0.99). However, the relative spread among the slopes is only approximately 3.6%, showing that tracking systems increase energy yield primarily through enhanced irradiance capture while the temperature-induced efficiency penalty remains similar in engineering magnitude across configurations. The proposed framework extends the role of machine learning from prediction to physically meaningful interpretation and increased transparency. [ABSTRACT FROM AUTHOR] |
| PLink | https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=enr&AN=194909215 |
| RecordInfo | BibRecord: BibEntity: Identifiers: – Type: doi Value: 10.3390/en19122766 Languages: – Code: eng Text: English PhysicalDescription: Pagination: PageCount: 18 StartPage: 2766 Subjects: – SubjectFull: Photovoltaic power systems Type: general – SubjectFull: Temperature effect Type: general – SubjectFull: Boosting algorithms Type: general – SubjectFull: Global radiation Type: general – SubjectFull: Machine learning Type: general – SubjectFull: Energy consumption Type: general – SubjectFull: Solar energy Type: general – SubjectFull: Shapley Additive Explanations Type: general Titles: – TitleFull: Decoupling Irradiance Gain and Thermal Efficiency Loss in Photovoltaic Tracking Systems Using Explainable Machine Learning. Type: main BibRelationships: HasContributorRelationships: – PersonEntity: Name: NameFull: Almalki, Naief IsPartOfRelationships: – BibEntity: Dates: – D: 15 M: 06 Text: Jun2026 Type: published Y: 2026 Identifiers: – Type: issn-print Value: 19961073 Numbering: – Type: volume Value: 19 – Type: issue Value: 12 Titles: – TitleFull: Energies (19961073) Type: main |
| ResultId | 1 |
