| Authors: |
Chayer M; Institute of Biomedical Engineering, Polytechnique Montréal, PO Box 6079, Montreal, Quebec H3C 3A7, Canada; Sainte-Justine University Hospital Center, Montreal, Canada. Electronic address: mathieu.chayer@polymtl.ca., Phan P; Division of Orthopaedics, Department of Surgery, Faculty of Medicine, University of Ottawa, Ottawa, Ontario, Canada. Electronic address: philippe.phan@gmail.com., Arnoux PJ; Laboratoire de biomécanique appliquée, Aix-Marseille Université/Université Gustave Eiffel, Marseille, France. Electronic address: pierre-jean.arnoux@univ-eiffel.fr., Wang Z; Centre Hospitalier de l'Université de Montréal, Montreal, Canada; Department of Surgery, Faculty of Medicine, Université de Montréal, Montreal, Quebec, Canada. Electronic address: zhi.wang.2@umontreal.ca., Rawlinson JJ; Department of Mechanical Engineering, Polytechnique Montréal, P.O. Box 6079, Montreal, Quebec, H3C 3A7, Canada; Spine Applied Research, Cranial and Spinal Technologies Medtronic, 18400 Pyramid Place, Memphis, Tennesse, 38132, USA. Electronic address: jeremy.j.rawlinson@medtronic.com., Aruwajoye O; Spine Applied Research, Cranial and Spinal Technologies Medtronic, 18400 Pyramid Place, Memphis, Tennesse, 38132, USA. Electronic address: olumide.aruwajoye@medtronic.com., Aubin CÉ; Institute of Biomedical Engineering, Polytechnique Montréal, PO Box 6079, Montreal, Quebec H3C 3A7, Canada; Sainte-Justine University Hospital Center, Montreal, Canada; Department of Surgery, Faculty of Medicine, Université de Montréal, Montreal, Quebec, Canada; Department of Mechanical Engineering, Polytechnique Montréal, P.O. Box 6079, Montreal, Quebec, H3C 3A7, Canada. Electronic address: carl-eric.aubin@polymtl.ca. |
