View in EDS

Design and experimental validation of an ultra-precision Abbe-compliant linear encoder-based position measurement system.

Saved in:
Bibliographic Details
Title: Design and experimental validation of an ultra-precision Abbe-compliant linear encoder-based position measurement system.
Authors: Bosmans, Niels1 niels.bosmans@kuleuven.be, Qian, Jun1, Reynaerts, Dominiek1
Source: Precision Engineering. Jan2017, Vol. 47, p197-211. 15p.
Subjects: Statistical accuracy, Machine tool path, Capacitive sensors, Workpieces, Coordinate measuring machines
Abstract: The design and development of an Abbe-compliant linear encoder-based measurement system for position measurement with a targeted 20 nm uncertainty ( k = 2) in machine tools and CMMs is presented. It consists of a linear scale and a capacitive sensor, mounted in line on an interface which is guided in the scale's measurement direction and driven by a linear motor based on the output signal of the capacitive sensor. The capacitive sensor measures the displacement of a target surface on the workpiece table. The functional point, which is the center of a tool or touch probe, is always aligned with the scale and capacitive sensor such that this configuration is compliant with the Abbe principle. Thermal stability is achieved by the application of a thermal center between the scale and capacitive sensor at the tip of the latter, which prevents both components to drift apart. Based on this concept, a prototype of a one-DOF measurement system was developed for a measurement range of 120 mm, together with an experimental setup aimed at verifying the reproducibility of the system for changing ambient conditions of ±0.5 °C and ±5%rh and the repeatability during tracking of a target surface over a short period of time. These experiments have shown that the measurement uncertainty of the one-DOF system is below 29 nm with a 95% confidence level. [ABSTRACT FROM AUTHOR]
Copyright of Precision Engineering is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Description
Abstract:The design and development of an Abbe-compliant linear encoder-based measurement system for position measurement with a targeted 20 nm uncertainty ( k = 2) in machine tools and CMMs is presented. It consists of a linear scale and a capacitive sensor, mounted in line on an interface which is guided in the scale's measurement direction and driven by a linear motor based on the output signal of the capacitive sensor. The capacitive sensor measures the displacement of a target surface on the workpiece table. The functional point, which is the center of a tool or touch probe, is always aligned with the scale and capacitive sensor such that this configuration is compliant with the Abbe principle. Thermal stability is achieved by the application of a thermal center between the scale and capacitive sensor at the tip of the latter, which prevents both components to drift apart. Based on this concept, a prototype of a one-DOF measurement system was developed for a measurement range of 120 mm, together with an experimental setup aimed at verifying the reproducibility of the system for changing ambient conditions of ±0.5 °C and ±5%rh and the repeatability during tracking of a target surface over a short period of time. These experiments have shown that the measurement uncertainty of the one-DOF system is below 29 nm with a 95% confidence level. [ABSTRACT FROM AUTHOR]
ISSN:01416359
DOI:10.1016/j.precisioneng.2016.08.005