View in EDS

Thermo-mixed lubrication analysis of coated compression rings with worn cylinder profiles.

Saved in:
Bibliographic Details
Title: Thermo-mixed lubrication analysis of coated compression rings with worn cylinder profiles.
Authors: Zavos, Anastasios1 zavos@upatras.gr, Nikolakopoulos, Pantelis1 pnikolak@mech.upatras.gr
Source: Industrial Lubrication & Tribology. 2017, Vol. 69 Issue 1, p15-29. 15p.
Subjects: Motorcycle engines, Deformations (Mechanics), Chromium-plating, Wear resistance, Lubrication & lubricants
Abstract: Purpose Compression rings are the main sources of frictional losses in internal combustion engines. The present paper aims to present a thermo-mixed hydrodynamic analysis for coated top compression rings. To understand the coating effects, the main tribological parameters are investigated into a ring-cylinder conjunction in a motorbike engine. Furthermore, flow simulations have been carried out on how different worn profiles on the cylinder inner liner affects friction, lubricant film and localized contact deformation of the coated compression rings.Design/methodology/approach In this paper, the basic geometrical dimensions of the top compression ring-cylinder system are obtained from a real motorbike engine. A 2D axisymmetric CFD/FLOTRAN model is created for coated compression rings. Flow simulations are performed by solving the Navier-Stokes and the energy equations. The load capacity of the asperities is also taken into account by Greenwood and Tripp contact model. Realistic boundary conditions are imposed to simulate the in-plane ring motion. The simulation model is validated with analytical and experimental data from the literature. Under thermal considerations, the contribution of worn cylinder profiles in conjunction with different coated compression rings is presented.Findings This research shows that because of thermal effects, the boundary friction is higher at reversals and the viscous friction is lower because of reduced oil viscosity. As regards to the isothermal case, the viscous friction is greater because of a higher lubricant viscosity. In the case of chromium-plated ring, boundary friction was 16 per cent lower than a grey cast iron ring taking into account thermal effects. Regarding the localized contact deformation, the coated compression rings showed lower values under different worn cylinder shapes. In particular, hard wear-resistant (Ni-Cr-Mo) coating showed the slighter local deformation. Therefore, the worn cylinder profiles promote boundary/mixed lubrication regime, whereas the lobed profile of cylinder inner liner becomes more wavy.Originality/value The solution of the thermo-mixed lubrication model, concerning the piston ring and worn cylinder tribo pair by taking into account the coating of the top compression ring. [ABSTRACT FROM AUTHOR]
Copyright of Industrial Lubrication & Tribology is the property of Emerald Publishing Limited and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Description
Abstract:Purpose Compression rings are the main sources of frictional losses in internal combustion engines. The present paper aims to present a thermo-mixed hydrodynamic analysis for coated top compression rings. To understand the coating effects, the main tribological parameters are investigated into a ring-cylinder conjunction in a motorbike engine. Furthermore, flow simulations have been carried out on how different worn profiles on the cylinder inner liner affects friction, lubricant film and localized contact deformation of the coated compression rings.Design/methodology/approach In this paper, the basic geometrical dimensions of the top compression ring-cylinder system are obtained from a real motorbike engine. A 2D axisymmetric CFD/FLOTRAN model is created for coated compression rings. Flow simulations are performed by solving the Navier-Stokes and the energy equations. The load capacity of the asperities is also taken into account by Greenwood and Tripp contact model. Realistic boundary conditions are imposed to simulate the in-plane ring motion. The simulation model is validated with analytical and experimental data from the literature. Under thermal considerations, the contribution of worn cylinder profiles in conjunction with different coated compression rings is presented.Findings This research shows that because of thermal effects, the boundary friction is higher at reversals and the viscous friction is lower because of reduced oil viscosity. As regards to the isothermal case, the viscous friction is greater because of a higher lubricant viscosity. In the case of chromium-plated ring, boundary friction was 16 per cent lower than a grey cast iron ring taking into account thermal effects. Regarding the localized contact deformation, the coated compression rings showed lower values under different worn cylinder shapes. In particular, hard wear-resistant (Ni-Cr-Mo) coating showed the slighter local deformation. Therefore, the worn cylinder profiles promote boundary/mixed lubrication regime, whereas the lobed profile of cylinder inner liner becomes more wavy.Originality/value The solution of the thermo-mixed lubrication model, concerning the piston ring and worn cylinder tribo pair by taking into account the coating of the top compression ring. [ABSTRACT FROM AUTHOR]
ISSN:00368792
DOI:10.1108/ILT-11-2015-0169