View in EDS

Thermal behavior of a translucent superinsulated latent heat energy storage wall in summertime.

Saved in:
Bibliographic Details
Title: Thermal behavior of a translucent superinsulated latent heat energy storage wall in summertime.
Authors: Souayfane, Farah1,2, Biwole, Pascal Henry3,4 pascal.biwole@uca.fr, Fardoun, Farouk2,5
Source: Applied Energy. May2018, Vol. 217, p390-408. 19p.
Subjects: Energy storage, Energy economics, Phase change materials, Heat transfer, Thermal analysis
Abstract: This paper investigates the thermal performance of a translucent solar wall providing, concurrently, storage and restitution of heat, super thermal-acoustic insulation and daylighting to the interior environment. The wall is composed of glazing, silica aerogel used as a transparent insulation material (TIM) and glass bricks filled with fatty acid, an eutectic phase change material (PCM). To assess the TIM–PCM wall thermal behavior, experimentations were conducted in-situ in a full-sized test cell located in Sophia Antipolis, southern France. Experimental data shows that the tested wall is more effective in winter and might cause overheating during the summer mainly due to solar gains and un-cycling behavior of PCM which remains in liquid state. To enhance the energy performance of the wall in summertime, a numerical model describing the heat transfer mechanisms occurring in the PCM layer in combination with the other transparent wall layers is developed. Then, the model of the wall is linked to TRNSYS software to assess the thermal performance of the whole building. The numerical model is validated experimentally and a good agreement is shown comparing the simulated values with the measured data for seven consecutive days in summer and winter. The importance of considering the natural convection effect in the liquid PCM is also demonstrated. Moreover, it was shown that shading devices can effectively reduce overheating while natural night ventilation decreases the indoor temperature without affecting the PCM performance since the outdoor temperature is always higher than the phase change temperature. The use of a glass with selective solar reflection properties depending on the season instead of the ordinary glazing is shown also to be very effective way to overcome the overheating problem. Finally, the TIM-PCM wall is tested under different climate conditions and passive solutions are given to ensure thermal comfort in summer season. [ABSTRACT FROM AUTHOR]
Copyright of Applied Energy is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Description
Abstract:This paper investigates the thermal performance of a translucent solar wall providing, concurrently, storage and restitution of heat, super thermal-acoustic insulation and daylighting to the interior environment. The wall is composed of glazing, silica aerogel used as a transparent insulation material (TIM) and glass bricks filled with fatty acid, an eutectic phase change material (PCM). To assess the TIM–PCM wall thermal behavior, experimentations were conducted in-situ in a full-sized test cell located in Sophia Antipolis, southern France. Experimental data shows that the tested wall is more effective in winter and might cause overheating during the summer mainly due to solar gains and un-cycling behavior of PCM which remains in liquid state. To enhance the energy performance of the wall in summertime, a numerical model describing the heat transfer mechanisms occurring in the PCM layer in combination with the other transparent wall layers is developed. Then, the model of the wall is linked to TRNSYS software to assess the thermal performance of the whole building. The numerical model is validated experimentally and a good agreement is shown comparing the simulated values with the measured data for seven consecutive days in summer and winter. The importance of considering the natural convection effect in the liquid PCM is also demonstrated. Moreover, it was shown that shading devices can effectively reduce overheating while natural night ventilation decreases the indoor temperature without affecting the PCM performance since the outdoor temperature is always higher than the phase change temperature. The use of a glass with selective solar reflection properties depending on the season instead of the ordinary glazing is shown also to be very effective way to overcome the overheating problem. Finally, the TIM-PCM wall is tested under different climate conditions and passive solutions are given to ensure thermal comfort in summer season. [ABSTRACT FROM AUTHOR]
ISSN:03062619
DOI:10.1016/j.apenergy.2018.02.119