Cost-effective Integrated Harvesting of Short-Rotation Poplar Plantations.

Saved in:

Bibliographic Details
Title:	Cost-effective Integrated Harvesting of Short-Rotation Poplar Plantations.
Authors:	Spinelli, Raffaele¹ (AUTHOR) raffaele.spinelli@ibe.cnr.it, Magagnotti, Natascia¹ (AUTHOR), Lombardini, Carolina¹ (AUTHOR), Leonello, Elaine Cristina² (AUTHOR)
Source:	BioEnergy Research. Jun2021, Vol. 14 Issue 2, p460-468. 9p.
Subjects:	Harvesting, Plantations, Tree size, Farm tractors, Poplars, Capital investments
Abstract:	Small tree size represents the main challenge when designing a cost-effective harvesting system for European short-rotation plantations. This challenge is further complicated by the need to obtain 4-m logs for high-end products, which rules out the possibility to deploy whole-tree chipping. Both challenges can be met through mass handling, which must begin at the time of felling and continue uninterrupted along the whole supply chain. The authors designed and tested a simple system based on an excavator-based feller buncher, two farm tractors converted into grapple skidders and an excavator-based grapple saw adapted to operate as an impromptu slasher. This system proved capable of containing harvesting cost below 17 € per green ton, while matching the necessary work quality requirements, in terms of value recovery and log quality specifications. Furthermore, the whole system can be acquired with a limited capital investment, estimated at ca. 400,000 €. Being based on general purpose equipment, the system is also versatile enough for deployment in a number of alternative jobs, when the coppicing season is over. [ABSTRACT FROM AUTHOR]
	Copyright of BioEnergy Research is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database:	Engineering Source

Description
Abstract:	Small tree size represents the main challenge when designing a cost-effective harvesting system for European short-rotation plantations. This challenge is further complicated by the need to obtain 4-m logs for high-end products, which rules out the possibility to deploy whole-tree chipping. Both challenges can be met through mass handling, which must begin at the time of felling and continue uninterrupted along the whole supply chain. The authors designed and tested a simple system based on an excavator-based feller buncher, two farm tractors converted into grapple skidders and an excavator-based grapple saw adapted to operate as an impromptu slasher. This system proved capable of containing harvesting cost below 17 € per green ton, while matching the necessary work quality requirements, in terms of value recovery and log quality specifications. Furthermore, the whole system can be acquired with a limited capital investment, estimated at ca. 400,000 €. Being based on general purpose equipment, the system is also versatile enough for deployment in a number of alternative jobs, when the coppicing season is over. [ABSTRACT FROM AUTHOR]
ISSN:	19391234
DOI:	10.1007/s12155-020-10163-2