Bibliographic Details
| Title: |
超低渗致密油藏二氧化碳吞吐合理注入参数确定. |
| Alternate Title: |
Determination of rational parameters for CO2 huff-n-puff in tight oil reservoirs with ultra-low permeability. |
| Authors: |
王小龙1 wangxlth@petrochina.com.cn, 高庆贤1, 董双福1, 杨震2, 钟银1, 马尚娟1, 周洪涛3 zhouht@cupk.edu.cn |
| Source: |
Oil Drilling & Production Technology / Shiyou Zuancai Gongyi. 2023, Vol. 45 Issue 3, p368-375. 8p. |
| Subjects: |
Heavy oil, Oil changes, Petroleum reservoirs, Gas injection, Permeability, Petroleum |
| Abstract (English): |
In the tight heavy oil reservoirs with ultra-low permeability in Ma 56 block, Santanghu Oilfield, to address the issue of low recovery rate brought by depleted development, a pilot CO2 huff-n-puff test was conducted. By analyzing the factors influencing CO2 huff-n-puff, well screening principles were determined based on reservoir conditions, formation conditions, well dynamics, and wellbore conditions. On the basis of analyzing the mechanisms of CO2 huff-n-puff during the seven stages from injection to stabilized production, by combining numerical simulation and field tests, aiming at the optimal oil increment and oil change rate of a single well, and under the conditions of emphasizing the influence of CO2 miscibility and supercritical state, rational injection parameters for gas huff-n-puff were further determined, that is, an injection of 2 000 tones of liquid CO2 into a single well in a single round, with an injection rate of 100 t/d, soaking period of 20 days, and a maximum huff-n-puff rounds of three. The CO2 huff-n-puff technology was applied in six wells in the ultra-low permeability tight heavy oil reservoir in Ma 56 Block, achieving a 100% success rate with an average single-well oil increasement of 1 073 tones and a cumulative oil increasement of 6 440 tones. Notably, Well Ma 56-7H achieved an oil increasement of 1 267 tones even after multiple rounds of fracturing and water huff-n-puff. The research outcomes provide a new pathway for further enhancing recovery rate in ultra-low permeability tight heavy oil reservoirs developed by depleted pattern. [ABSTRACT FROM AUTHOR] |
| Abstract (Chinese): |
为解决三塘湖油田马 56 区块超低渗致密稠油油藏衰竭式开采采收率低的问题, 开展二氧化碳吞吐先导性试验。通过对 二氧化吞吐影响因素分析, 从地层条件、储层条件、油井动态和井筒条件等方面明确了选井原则, 并在分析二氧化碳吞吐从注入到稳 产的 7 个阶段作用机理的基础上, 采用数值模拟和现场试验的方法, 以最优单井增油量和换油率为目标, 在重点考虑二氧化碳混相 和超临界态影响的条件下, 进一步确定了合理的注气吞吐参数, 即单井单轮次注入液态二氧化碳量 2 000 t, 注入速度 100 t/d, 闷井 时间 20 d, 吞吐轮次在 3 个轮次以内。二氧化碳吞吐技术在马 56 区块超低渗致密稠油油藏实施 6 井次, 有效率 100%, 平均单井增 油 1 073 t, 累计增油为 6 440 t, 尤其马 56-7H 井在实施多轮次压裂及注水吞吐措施后, 采用二氧化碳吞吐仍累计增油 1 267 t。研究 成果为超低渗致密稠油油藏衰竭式开采后进一步提高采收率探索了新路径。 [ABSTRACT FROM AUTHOR] |
|
Copyright of Oil Drilling & Production Technology / Shiyou Zuancai Gongyi is the property of Shiyou Zuancai Gongyi Bianjibu and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) |
| Database: |
Engineering Source |
