Numerical Investigation of PTT Fluid Under Bidirectional Extensional Forces and Crystallization Effects.
Saved in:
| Title: | Numerical Investigation of PTT Fluid Under Bidirectional Extensional Forces and Crystallization Effects. |
|---|---|
| Authors: | Mercan, Hatice1 (AUTHOR) hmercan@yildiz.edu.tr |
| Source: | Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ). Aug2024, Vol. 49 Issue 8, p10787-10803. 17p. |
| Subjects: | Heat transfer coefficient, Rate equation model, Crystallization, Axial stresses, Crystal structure, Bubbles |
| Abstract: | A numerical simulation of the film blowing process is performed. The Phan–Thien and Tanner (PTT) constitutive equations with quiescent and flow-induced crystallization effects are considered with proper boundary and initial conditions. The PTT model is employed both for molten and crystallized polymer. Modeling of crystallization is done with nested Schneider rate equations and the Kolmogorov–Avrami model. The current model can predict the shape and size of the bubbles, as well as their temperature, stress, space filling and morphological changes for given process conditions. The study focuses on investigating the impact of process conditions on the mechanical response of the blown film, as well as on the morphological structure of the crystallizing molten polymer. It is observed that the axial stress increases at a faster rate compared to the circumferential stress with increase in draw ratio. The trend is reversed for increasing blow-up ratios. Increasing the draw ratio does not result in significant improvement in the quiescent contribution to the crystalline structure, but it leads to a decrease in the flow-induced contribution. Increasing blow-up ratio leads to increase in total space filling and the flow-induced component of the crystalline structure. Finally, three heat transfer coefficients chosen from the literature are compared. It is observed that the model choice is not critical for higher draw ratio values, but for low and moderate values, detailed investigations are required. The presented model enables accurate prediction of both the morphological structure and mechanical properties of semicrystalline polymers in a film blowing process. [ABSTRACT FROM AUTHOR] |
| Copyright of Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ) is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| Abstract: | A numerical simulation of the film blowing process is performed. The Phan–Thien and Tanner (PTT) constitutive equations with quiescent and flow-induced crystallization effects are considered with proper boundary and initial conditions. The PTT model is employed both for molten and crystallized polymer. Modeling of crystallization is done with nested Schneider rate equations and the Kolmogorov–Avrami model. The current model can predict the shape and size of the bubbles, as well as their temperature, stress, space filling and morphological changes for given process conditions. The study focuses on investigating the impact of process conditions on the mechanical response of the blown film, as well as on the morphological structure of the crystallizing molten polymer. It is observed that the axial stress increases at a faster rate compared to the circumferential stress with increase in draw ratio. The trend is reversed for increasing blow-up ratios. Increasing the draw ratio does not result in significant improvement in the quiescent contribution to the crystalline structure, but it leads to a decrease in the flow-induced contribution. Increasing blow-up ratio leads to increase in total space filling and the flow-induced component of the crystalline structure. Finally, three heat transfer coefficients chosen from the literature are compared. It is observed that the model choice is not critical for higher draw ratio values, but for low and moderate values, detailed investigations are required. The presented model enables accurate prediction of both the morphological structure and mechanical properties of semicrystalline polymers in a film blowing process. [ABSTRACT FROM AUTHOR] |
|---|---|
| ISSN: | 2193567X |
| DOI: | 10.1007/s13369-023-08491-4 |
