A new effective decoupling method to identify the tracking errors of the motion axes of the five-axis machine tools.
Saved in:
| Title: | A new effective decoupling method to identify the tracking errors of the motion axes of the five-axis machine tools. |
|---|---|
| Authors: | Osei, Seth1 (AUTHOR), Wei, Wang1 (AUTHOR) wangwhit@163.com, Yu, Jiahao1 (AUTHOR), Ding, Qicheng2 (AUTHOR) |
| Source: | Journal of Intelligent Manufacturing. Oct2024, Vol. 35 Issue 7, p3377-3392. 16p. |
| Subjects: | Machine tool manufacturing, Machine tool industry, Machine tools, Machine performance, Manufacturing industries |
| Abstract: | Currently, there are demands for machine tools with higher dynamic performance as a result of their high machining accuracy and efficiency in designing complex parts in the manufacturing industry. The motion delays in each of the motion axes cause dynamic tracking errors or tool tracking errors which greatly affect the surface quality of machined parts; hence, tuning the dynamic parameters like the position gains of the motion axis causing the defect is as good as eliminating the error source rather than tuning the parameters of all the motion axes. This work proposes a decoupling method to identify the particular motion axis that greatly affects or causes the tool tracking error by using the ISO BK3 kinematic test, and this involves orientation contour error estimation and motion axis error computation based on inverse kinematics of the machine tool transformation. An experiment was carried out on an industrial machine tool with a tilting rotary table to verify the simulation results; the feed servo system model of the motion axes was constructed using MATLAB Simulink tools. The results obtained show that the tool tracking errors are greatly influenced by some dynamic parameters like the feedrate and the position gains emanating from a particular motion axis with dynamic deficiency, and the proposed decoupling method robustly identifies the individual motion axes greatly affecting the dynamic tracking error which makes it very relevant to tune only the dynamic parameters of those particular motion axes instead tuning all. Moreover, this method is simple and robust, and its implementation can help improve the dynamic performance of machine tools in the manufacturing industry. [ABSTRACT FROM AUTHOR] |
| Copyright of Journal of Intelligent Manufacturing is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| Abstract: | Currently, there are demands for machine tools with higher dynamic performance as a result of their high machining accuracy and efficiency in designing complex parts in the manufacturing industry. The motion delays in each of the motion axes cause dynamic tracking errors or tool tracking errors which greatly affect the surface quality of machined parts; hence, tuning the dynamic parameters like the position gains of the motion axis causing the defect is as good as eliminating the error source rather than tuning the parameters of all the motion axes. This work proposes a decoupling method to identify the particular motion axis that greatly affects or causes the tool tracking error by using the ISO BK3 kinematic test, and this involves orientation contour error estimation and motion axis error computation based on inverse kinematics of the machine tool transformation. An experiment was carried out on an industrial machine tool with a tilting rotary table to verify the simulation results; the feed servo system model of the motion axes was constructed using MATLAB Simulink tools. The results obtained show that the tool tracking errors are greatly influenced by some dynamic parameters like the feedrate and the position gains emanating from a particular motion axis with dynamic deficiency, and the proposed decoupling method robustly identifies the individual motion axes greatly affecting the dynamic tracking error which makes it very relevant to tune only the dynamic parameters of those particular motion axes instead tuning all. Moreover, this method is simple and robust, and its implementation can help improve the dynamic performance of machine tools in the manufacturing industry. [ABSTRACT FROM AUTHOR] |
|---|---|
| ISSN: | 09565515 |
| DOI: | 10.1007/s10845-023-02220-2 |
