View in EDS

Effects of neat and silver coated fly ash cenospheres on the properties of styrene-butadiene-styrene block copolymer composites obtained by a solution mixing method.

Saved in:
Bibliographic Details
Title: Effects of neat and silver coated fly ash cenospheres on the properties of styrene-butadiene-styrene block copolymer composites obtained by a solution mixing method.
Authors: Sukhareva, Ksenia1,2 (AUTHOR) sukhareva.kv@rea.ru, Burmistrov, Igor1,3 (AUTHOR), Mamin, Eldar1,2 (AUTHOR), Maltsev, Alexander2 (AUTHOR), Karpova, Svetlana2 (AUTHOR), Offor, Peter O4,5 (AUTHOR)
Source: Journal of Elastomers & Plastics. Oct2024, Vol. 56 Issue 6, p745-773. 29p.
Subjects: Fly ash, Atmospheric oxygen, Electroless plating, Microscopy, Thermal properties, Styrene-butadiene rubber
Abstract: Utilization of industrial by-products to develop novel value-added materials while mitigating their environmental impact is a crucial issue. Fly ash (FA) microparticles are a common component of power plant waste. This work aims to investigate the impact of varying concentrations of neat/silver-coated FA on the morphology and thermal properties of styrene-butadiene-styrene/FA composites. Composite materials based on styrene-butadiene styrene triblock copolymer (SBS) with various volume fractions of as-received and silver-coated FA were prepared using a solution mixing method. Silver-coated cenosphere particles were prepared using an electroless plating method. Scanning electron microscopy and optical microscopy showed that the solution mixing method obtains composite materials characterized by uniform dispersion of filler without large particle aggregates and predominantly unbroken cenospheres. The tensile strength of the composite with 10% of both as-received and silver-coated fly ash remains at the level of the unfilled SBS sample. However, at higher filler concentrations (20% and 30%), a decrease in strength by 27% and 42% respectively is observed, possibly due to the agglomeration of FA, which leads to a poorer interface and dispersion at higher filler weights. Additionally, thermal analysis in an oxygen atmosphere showed that the introduction of both as-received and metallized cenospheres in the same quantity increased the thermal stability of the tested composition. The temperatures at 5% mass loss of SBS/FA composites were on average 70°C higher than those of the original SBS. [ABSTRACT FROM AUTHOR]
Copyright of Journal of Elastomers & Plastics is the property of Sage Publications Inc. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Description
Abstract:Utilization of industrial by-products to develop novel value-added materials while mitigating their environmental impact is a crucial issue. Fly ash (FA) microparticles are a common component of power plant waste. This work aims to investigate the impact of varying concentrations of neat/silver-coated FA on the morphology and thermal properties of styrene-butadiene-styrene/FA composites. Composite materials based on styrene-butadiene styrene triblock copolymer (SBS) with various volume fractions of as-received and silver-coated FA were prepared using a solution mixing method. Silver-coated cenosphere particles were prepared using an electroless plating method. Scanning electron microscopy and optical microscopy showed that the solution mixing method obtains composite materials characterized by uniform dispersion of filler without large particle aggregates and predominantly unbroken cenospheres. The tensile strength of the composite with 10% of both as-received and silver-coated fly ash remains at the level of the unfilled SBS sample. However, at higher filler concentrations (20% and 30%), a decrease in strength by 27% and 42% respectively is observed, possibly due to the agglomeration of FA, which leads to a poorer interface and dispersion at higher filler weights. Additionally, thermal analysis in an oxygen atmosphere showed that the introduction of both as-received and metallized cenospheres in the same quantity increased the thermal stability of the tested composition. The temperatures at 5% mass loss of SBS/FA composites were on average 70°C higher than those of the original SBS. [ABSTRACT FROM AUTHOR]
ISSN:00952443
DOI:10.1177/00952443241268637