High moisture permeable cellulose diacetate films by reactive polyethylene glycol plasticizers.
Saved in:
| Title: | High moisture permeable cellulose diacetate films by reactive polyethylene glycol plasticizers. |
|---|---|
| Authors: | Wu, Peipei1 (AUTHOR), Zhao, Yuchang2 (AUTHOR), Zhang, Yuwen1 (AUTHOR), Shen, Qingyue1 (AUTHOR), Hu, Shuaishuai1 (AUTHOR), Chen, Shuangjun1,3 (AUTHOR) chenshuangjun@njtech.edu.cn |
| Source: | Journal of Polymer Research. Dec2024, Vol. 31 Issue 12, p1-11. 11p. |
| Subjects: | Fourier transform infrared spectroscopy, Prepolymers, Polyethylene glycol, Water vapor, Polyethylene films |
| Abstract: | Intrinsic moisture permeability of bio-based polymer cellulose diacetate (CDA) is not sufficient for some requirements. Herein, isophorone diisocyanate (IPDI) modified polyethylene glycol (IPEG200) was served as a reactive plasticizer to enhance the water vapor permeability (WVP) of CDA films without plasticizer migration problems. The performances of CDA films were further improved by adding hydrophilic nanometer Al2O3 fillers. Fourier transform infrared spectroscopy (FTIR) was used to the synthesis processes of the prepolymers and their reaction with CDA chains. The crosslinking reaction was indicated by monitoring the gel content. When IPEG200 is 9.66 phr and Al2O3 filler is 5 phr, the WVP is raised to 8.9 × 10−13 g·cm/cm2·s·Pa, which is much higher than CDA's. WVP 14.2 × 10−13 g·cm/cm2·s·Pa of CDA film can be obtained by adding 60 phr PEG600 and 25 phr Al2O3 when using IPEG200 as the compatibilizer. This study provides a simple, feasible, low-cost method for preparing high moisture permeable film by reactive plasticizers. [ABSTRACT FROM AUTHOR] |
| Copyright of Journal of Polymer Research is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| Abstract: | Intrinsic moisture permeability of bio-based polymer cellulose diacetate (CDA) is not sufficient for some requirements. Herein, isophorone diisocyanate (IPDI) modified polyethylene glycol (IPEG200) was served as a reactive plasticizer to enhance the water vapor permeability (WVP) of CDA films without plasticizer migration problems. The performances of CDA films were further improved by adding hydrophilic nanometer Al2O3 fillers. Fourier transform infrared spectroscopy (FTIR) was used to the synthesis processes of the prepolymers and their reaction with CDA chains. The crosslinking reaction was indicated by monitoring the gel content. When IPEG200 is 9.66 phr and Al2O3 filler is 5 phr, the WVP is raised to 8.9 × 10−13 g·cm/cm2·s·Pa, which is much higher than CDA's. WVP 14.2 × 10−13 g·cm/cm2·s·Pa of CDA film can be obtained by adding 60 phr PEG600 and 25 phr Al2O3 when using IPEG200 as the compatibilizer. This study provides a simple, feasible, low-cost method for preparing high moisture permeable film by reactive plasticizers. [ABSTRACT FROM AUTHOR] |
|---|---|
| ISSN: | 10229760 |
| DOI: | 10.1007/s10965-024-04192-0 |
