Dose Equalization in Electron Beam Neutralization of Impurities in Water.
Saved in:
| Title: | Dose Equalization in Electron Beam Neutralization of Impurities in Water. |
|---|---|
| Authors: | Ponomarev, A. V.1 (AUTHOR) ponomarev@ipc.rssi.ru |
| Source: | High Energy Chemistry. Apr2025, Vol. 59 Issue 2, p186-191. 6p. |
| Subjects: | Water jets, Electron accelerators, Jet planes, Wastewater treatment, Energy dissipation |
| Abstract: | A promising design of an irradiator for high-speed electron beam treatment of wastewater in a jet mode is considered. The feasibility of combining technical solutions previously used separately in the design of the ELV-12 and Electron-10 accelerators is demonstrated. A high-speed water jet (>1 m/s) was irradiated from both sides in the gap between two beam windows, directing the beams at an angle of α = 45°−60° to the jet plane. In this case, the useful thicknesses of the jet, which ensured maximum uniformity of irradiation with 1-, 2-, and 3-MeV electrons, as well as the lowest beam energy losses, were 5.2, 13.1, and 20.8 mm at α = 60° and 4.2, 10.7, and 17 mm at α = 45°, respectively. Options for simultaneous irradiation of two and four water jets are being considered. [ABSTRACT FROM AUTHOR] |
| Copyright of High Energy Chemistry is the property of Springer Nature and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| Abstract: | A promising design of an irradiator for high-speed electron beam treatment of wastewater in a jet mode is considered. The feasibility of combining technical solutions previously used separately in the design of the ELV-12 and Electron-10 accelerators is demonstrated. A high-speed water jet (>1 m/s) was irradiated from both sides in the gap between two beam windows, directing the beams at an angle of α = 45°−60° to the jet plane. In this case, the useful thicknesses of the jet, which ensured maximum uniformity of irradiation with 1-, 2-, and 3-MeV electrons, as well as the lowest beam energy losses, were 5.2, 13.1, and 20.8 mm at α = 60° and 4.2, 10.7, and 17 mm at α = 45°, respectively. Options for simultaneous irradiation of two and four water jets are being considered. [ABSTRACT FROM AUTHOR] |
|---|---|
| ISSN: | 00181439 |
| DOI: | 10.1134/S001814392470173X |
