Numerical Simulation-Based Design of a Pneumatic Finger Rehabilitation Robot for Tele-Rehabilitation.

Saved in:

Bibliographic Details
Title:	Numerical Simulation-Based Design of a Pneumatic Finger Rehabilitation Robot for Tele-Rehabilitation.
Authors:	Li, Dongze¹ p123122@siswa.ukm.edu.my, Gan, Kok Beng¹ kbgan@ukm.edu.my, Sim, Kok Swee² kssim@mmu.edu.my
Source:	International Journal of Online & Biomedical Engineering. 2026, Vol. 22 Issue 4, p123-139. 17p.
Subjects:	Pneumatic actuators, Telerehabilitation, Computer simulation, Network performance, Motion control devices, Robotic exoskeletons, PID controllers
Abstract:	Hand motor function rehabilitation after stroke or traumatic injury requires repetitive, task-specific training, which is often limited by therapist availability and clinical resources. This study presents a lightweight, modular, and wearable pneumatic robotic arm for finger rehabilitation, designed to support tele-rehabilitation applications. The system employs a four-link mechanical structure that accommodates variations in finger length and enables natural flexion and extension without the need for individual customization. Motion control is achieved using a discrete-time proportional-integral-derivative (PID) controller with aerodynamic drag compensation, ensuring stable and accurate actuation under compressible air dynamics. A stage-specific pressure strategy is implemented, applying 0.1 MPa for early mobilization and 0.3 MPa for intensive training, enabling up to 80° of finger bending within 2.5 s. Network-induced latency and sensor delay are explicitly modeled in the control loop, and their effects on response time and tracking accuracy are evaluated through numerical simulations. Simulation results demonstrate a motion tracking error below 2°, with control errors remaining bounded under network latencies up to 50 ms, confirming real-time responsiveness suitable for remote rehabilitation scenarios. These findings support the feasibility of a scalable, cost-effective, and clinically viable pneumatic rehabilitation platform for individualized hand therapy and tele-rehabilitation deployment. [ABSTRACT FROM AUTHOR]
	Copyright of International Journal of Online & Biomedical Engineering is the property of International Journal of Online Engineering and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database:	Engineering Source

Description
Abstract:	Hand motor function rehabilitation after stroke or traumatic injury requires repetitive, task-specific training, which is often limited by therapist availability and clinical resources. This study presents a lightweight, modular, and wearable pneumatic robotic arm for finger rehabilitation, designed to support tele-rehabilitation applications. The system employs a four-link mechanical structure that accommodates variations in finger length and enables natural flexion and extension without the need for individual customization. Motion control is achieved using a discrete-time proportional-integral-derivative (PID) controller with aerodynamic drag compensation, ensuring stable and accurate actuation under compressible air dynamics. A stage-specific pressure strategy is implemented, applying 0.1 MPa for early mobilization and 0.3 MPa for intensive training, enabling up to 80° of finger bending within 2.5 s. Network-induced latency and sensor delay are explicitly modeled in the control loop, and their effects on response time and tracking accuracy are evaluated through numerical simulations. Simulation results demonstrate a motion tracking error below 2°, with control errors remaining bounded under network latencies up to 50 ms, confirming real-time responsiveness suitable for remote rehabilitation scenarios. These findings support the feasibility of a scalable, cost-effective, and clinically viable pneumatic rehabilitation platform for individualized hand therapy and tele-rehabilitation deployment. [ABSTRACT FROM AUTHOR]
ISSN:	26268493
DOI:	10.3991/ijoe.v22i04.59455